SUPERTAB S7G KRC1032 : cm2 spd 1.27 + ast 1.03 logs - GSM-Forum

dadarko · 05-16-2018, 23:08

Set mode to : SP [SC773x] eMMC [Generic 4.x-5.0]

Operation : Check/Read Info [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

==== Wait for phone...

Phone found! [ 38 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
Boot failed!

Boot failed!

Reconnect Power/Cable!

********************************************

Set mode to : SP [SC773x] eMMC [Android 5.x]

Start at : [16/05/2018 / 22:48:28]
Operation : Check/Read Info [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

==== Wait for phone...

Phone found! [ 38 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable

*****cm2 spd freez force close

************************************************** *

Chinese Miracle II [SPD module] v 1.27

Set mode to : SP [SC773x] eMMC [Android 6.x]

Operation : Check/Read Info [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

==== Wait for phone...

Phone found! [ 38 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
Boot failed!
DS : Loader start failed! Wrong Model selection!
Boot failed!

Reconnect Power/Cable!

**********************************************

Set mode to : SP [SC773x] eMMC [Android 7.x]

Operation : Check/Read Info [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

==== Wait for phone...

Phone found! [ 38 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
Boot failed!
DS : Loader start failed! Wrong Model selection!
Boot failed!

Reconnect Power/Cable!

******************************************

Set mode to : SP [SC773x] eMMC [Generic 4.x-5.0]

Set mode to : [AltLDR] SP [SC773x] eMMC [Generic 4.x-5.0]

Operation : Check/Read Info [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

==== Wait for phone...

Phone found! [ 38 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
Boot failed!
DS : Loader start failed! Wrong Model selection!
Boot failed!

Reconnect Power/Cable!

**********************************************

Set mode to : [AltLDR] SP [SC773x] eMMC [Android 6.x]

Operation : Check/Read Info [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

==== Wait for phone...

Phone found! [ 38 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
Boot failed!
DS : Loader start failed! Wrong Model selection!
Boot failed!

Reconnect Power/Cable!

********************************************
Set mode to : [AltLDR] SP [SC773x] eMMC [Android 7.x]

Operation : Check/Read Info [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

==== Wait for phone...

Phone found! [ 38 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
Boot failed!
DS : Loader start failed! Wrong Model selection!
Boot failed!

Reconnect Power/Cable!

**************************************************

log with cm2 ast 1.03

Waiting for device in ADB mode ...

1. Connect device, enable 'DEVELOPER MODE' and 'USB DEBUG', if need!
2. Insert USB cable, accept AUTH on PhoneScreen, if software ask!

Connect Ok!

Device Info :
Vendor : SPRD
Model : SuperTabS7G
Device : sp7731gea_hdplus_dt
Android : 5.1
Product : scx35_sp7731gea_hd
Brand : SuperTab
Serial : 56188245439943
Build_tm : 2017å¹´ 10æœˆ 13æ—¥ æ˜ŸæœŸäº” 18:36:33 CST
DisplayID : s706a_cuser_20171013
Patch Ver : LMY47D
Hardware : sc7731
HW Board : sp7731gea_hd
CPU rel : armeabi-v7a
SIM Card : ABSENT,NOT_READY
BaseBand : TM_BASE_MP_II_W15.26|sc7731g_CP0_modem|06-23-2015 14:29:29
BaseBand : TM_BASE_MP_II_W15.26|sc7731g_CP0_modem|06-23-2015 14:29:29
RIL ver : android reference-ril 1.0
USB Conf : mass_storage,adb
Sys USB : mtp,adb
FS Crypt : unencrypted

Done!
Elapsed: 00:00:12

************************************************

hello team i have this new tablet in market : supertab s7g krc1032 and i want to read flash but no success i think this tab have a new chips if cm2 spd 1.27 can't support it.

i hope this tab can be supported in futur update think you.

dadarko · 05-16-2018, 23:19

Chinese Miracle II [SPD module] v 1.27

Set mode to : SP [SC773x] eMMC [Android 5.x]
Set mode to : [AltLDR] SP [SC773x] eMMC [Android 5.x]

Operation : Check/Read Info [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

==== Wait for phone...

Phone found! [ 38 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
Boot failed!

Boot failed!

Reconnect Power/Cable!

**Brka** · 05-17-2018, 00:48

Load firmware, then try to flash.

Download : SP7731GEA_HD_scx35_sp7731gea_hd_5.1_s706a_cuser_20 160325_SuperTabS7G

Quote:

Device Brand : SuperTab
Device Model : scx35_sp7731gea_hd
Device CPU : sp7731gea_hd
Device IntName : sp7731gea_hdplus_dt
Device Version : 5.1
Device Compile : 25-03-2016 6:10:34
Device Project : s706a_cuser_20160325
Device ExtInfo : SuperTabS7G

dadarko · 05-17-2018, 22:23

Quote:

Originally Posted by Brka

Load firmware, then try to flash.

Download : SP7731GEA_HD_scx35_sp7731gea_hd_5.1_s706a_cuser_20 160325_SuperTabS7G

think you brother but with your firmware i can't read ino or flash

Chinese Miracle II [SPD module] v 1.27

Set mode to : SP SC77xx [Model Select]

Infinity SC Firmware Detected
FW Size : 1336 MiB
Load Ok!

File Info
Created by Infinity-Box (c) Chinese Miracle II (c) 2017
Device Brand : SuperTab
Device Model : scx35_sp7731gea_hd
Device CPU : sp7731gea_hd
Device IntName : sp7731gea_hdplus_dt
Device Version : 5.1
Device Compile : 25-03-2016 6:10:34
Device Project : s706a_cuser_20160325
Device ExtInfo : SuperTabS7G

Operation : Check/Read Info [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

==== Wait for phone...

Phone found! [ 38 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
Boot failed!

Boot failed!

Reconnect Power/Cable!

*****************************************

Operation : Check/Read Info [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

==== Wait for phone...

Phone found! [ 38 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
Boot failed!

Boot failed!

Reconnect Power/Cable!

***********************************

this tablet is supertab s7g krc1032

i have a friend who have a mobile shop and every time he give me new mobile or tablet to read flash and this time he gived me this tab and no success

bassemsky · 06-19-2018, 19:15

i have same problem
cant hard reset

dadarko · 06-19-2018, 20:56

Quote:

Originally Posted by bassemsky

i have same problem
cant hard reset

for me no solution at this moment and for others i don't know

bassemsky · 06-19-2018, 21:04

Anyone have idea how hard reset this tablet spd
Thank you

Envoyé de mon iPhone en utilisant Tapatalk

Yusuf Lawal · 06-19-2018, 21:29

@bassemsky, use Google idea or post infinity CM2 log for help.

Dzomega · 07-20-2018, 21:51

any solution i can't flash this tab same problem or read Info

pshycoboy · 07-21-2018, 15:15

many phone spd chipset have fdl lock,need fdl original from factory firmware for boot this phone.and much phone have firmware with new extensi file,exm cpb file..
i hope infinity tim can create custom load fdl1 and fdl2 from factory file for boot,this usseful for resset frp without flashing..

Dzomega · 07-21-2018, 18:21

any one have this firmware for supertab sdp
krc1032

Dzomega · 07-24-2018, 17:58

ihave new tab itry to read info when i restar the tab black image cm2 remove the fdl!!!!!!!!!

tad60 · 08-02-2018, 16:38

only for format and frp reset hard reset use in pac file krc 1021 downlowd from ****tun-droid**** after use cm2spd(select sc7030.....android 5.x)

Dzomega · 06-04-2019, 12:27

any update itry with new version InfinityBox CM2SP2 same!! problem

Saberask · 09-30-2019, 09:52

https://*********/kk6UF2itOUQ

05-16-2018, 23:08	#1 (permalink)
dadarko Freak Poster Join Date: Jan 2017 Posts: 359 Member: 2671513 Status: Offline Thanks Meter: 121	SUPERTAB S7G KRC1032 : cm2 spd 1.27 + ast 1.03 logs Set mode to : SP [SC773x] eMMC [Generic 4.x-5.0] Operation : Check/Read Info [ v1.27 ] 1. Remove battery. Insert battery back 2. Press and hold 'VolumeUp' and 'VolumeDown' keys -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key 3. Insert cable ==== Wait for phone... Phone found! [ 38 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable Boot failed! Boot failed! Reconnect Power/Cable! ****************************************** Set mode to : SP [SC773x] eMMC [Android 5.x] Start at : [16/05/2018 / 22:48:28] Operation : Check/Read Info [ v1.27 ] 1. Remove battery. Insert battery back 2. Press and hold 'VolumeUp' and 'VolumeDown' keys -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key 3. Insert cable ==== Wait for phone... Phone found! [ 38 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable *cm2 spd freez force close ************************************************ * Chinese Miracle II [SPD module] v 1.27 Set mode to : SP [SC773x] eMMC [Android 6.x] Operation : Check/Read Info [ v1.27 ] 1. Remove battery. Insert battery back 2. Press and hold 'VolumeUp' and 'VolumeDown' keys -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key 3. Insert cable ==== Wait for phone... Phone found! [ 38 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable Boot failed! DS : Loader start failed! Wrong Model selection! Boot failed! Reconnect Power/Cable! ******************************************** Set mode to : SP [SC773x] eMMC [Android 7.x] Operation : Check/Read Info [ v1.27 ] 1. Remove battery. Insert battery back 2. Press and hold 'VolumeUp' and 'VolumeDown' keys -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key 3. Insert cable ==== Wait for phone... Phone found! [ 38 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable Boot failed! DS : Loader start failed! Wrong Model selection! Boot failed! Reconnect Power/Cable! ************************************** Set mode to : SP [SC773x] eMMC [Generic 4.x-5.0] Set mode to : [AltLDR] SP [SC773x] eMMC [Generic 4.x-5.0] Operation : Check/Read Info [ v1.27 ] 1. Remove battery. Insert battery back 2. Press and hold 'VolumeUp' and 'VolumeDown' keys -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key 3. Insert cable ==== Wait for phone... Phone found! [ 38 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable Boot failed! DS : Loader start failed! Wrong Model selection! Boot failed! Reconnect Power/Cable! ****************************************** Set mode to : [AltLDR] SP [SC773x] eMMC [Android 6.x] Operation : Check/Read Info [ v1.27 ] 1. Remove battery. Insert battery back 2. Press and hold 'VolumeUp' and 'VolumeDown' keys -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key 3. Insert cable ==== Wait for phone... Phone found! [ 38 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable Boot failed! DS : Loader start failed! Wrong Model selection! Boot failed! Reconnect Power/Cable! **************************************** Set mode to : [AltLDR] SP [SC773x] eMMC [Android 7.x] Operation : Check/Read Info [ v1.27 ] 1. Remove battery. Insert battery back 2. Press and hold 'VolumeUp' and 'VolumeDown' keys -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key 3. Insert cable ==== Wait for phone... Phone found! [ 38 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable Boot failed! DS : Loader start failed! Wrong Model selection! Boot failed! Reconnect Power/Cable! ********************************************** log with cm2 ast 1.03 Waiting for device in ADB mode ... 1. Connect device, enable 'DEVELOPER MODE' and 'USB DEBUG', if need! 2. Insert USB cable, accept AUTH on PhoneScreen, if software ask! Connect Ok! Device Info : Vendor : SPRD Model : SuperTabS7G Device : sp7731gea_hdplus_dt Android : 5.1 Product : scx35_sp7731gea_hd Brand : SuperTab Serial : 56188245439943 Build_tm : 2017å¹´ 10æœˆ 13æ—¥ æ˜ŸæœŸäº” 18:36:33 CST DisplayID : s706a_cuser_20171013 Patch Ver : LMY47D Hardware : sc7731 HW Board : sp7731gea_hd CPU rel : armeabi-v7a SIM Card : ABSENT,NOT_READY BaseBand : TM_BASE_MP_II_W15.26\|sc7731g_CP0_modem\|06-23-2015 14:29:29 BaseBand : TM_BASE_MP_II_W15.26\|sc7731g_CP0_modem\|06-23-2015 14:29:29 RIL ver : android reference-ril 1.0 USB Conf : mass_storage,adb Sys USB : mtp,adb FS Crypt : unencrypted Done! Elapsed: 00:00:12 ********************************************** hello team i have this new tablet in market : supertab s7g krc1032 and i want to read flash but no success i think this tab have a new chips if cm2 spd 1.27 can't support it. i hope this tab can be supported in futur update think you.

05-16-2018, 23:19	#2 (permalink)
dadarko Freak Poster Join Date: Jan 2017 Posts: 359 Member: 2671513 Status: Offline Thanks Meter: 121	Chinese Miracle II [SPD module] v 1.27 Set mode to : SP [SC773x] eMMC [Android 5.x] Set mode to : [AltLDR] SP [SC773x] eMMC [Android 5.x] Operation : Check/Read Info [ v1.27 ] 1. Remove battery. Insert battery back 2. Press and hold 'VolumeUp' and 'VolumeDown' keys -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key 3. Insert cable ==== Wait for phone... Phone found! [ 38 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable Boot failed! Boot failed! Reconnect Power/Cable!

06-19-2018, 19:15	#5 (permalink)
bassemsky Freak Poster Join Date: Sep 2015 Location: Algeria Posts: 467 Member: 2462504 Status: Offline Sonork: 1001681026 Thanks Meter: 19	i have same problem cant hard reset

06-19-2018, 21:04	#7 (permalink)
bassemsky Freak Poster Join Date: Sep 2015 Location: Algeria Posts: 467 Member: 2462504 Status: Offline Sonork: 1001681026 Thanks Meter: 19	Anyone have idea how hard reset this tablet spd Thank you Envoyé de mon iPhone en utilisant Tapatalk

06-19-2018, 21:29	#8 (permalink)
Yusuf Lawal No Life Poster Join Date: Oct 2011 Location: Nigeria Posts: 6,593 Member: 1677653 Status: Offline Thanks Meter: 2,769	@bassemsky, use Google idea or post infinity CM2 log for help.

07-20-2018, 21:51	#9 (permalink)
Dzomega No Life Poster Join Date: Jun 2016 Location: UK Posts: 613 Member: 2581848 Status: Offline Thanks Meter: 249	any solution i can't flash this tab same problem or read Info

07-21-2018, 15:15	#10 (permalink)
pshycoboy Freak Poster Join Date: Jun 2011 Location: ilution Posts: 344 Member: 1597314 Status: Offline Thanks Meter: 116	many phone spd chipset have fdl lock,need fdl original from factory firmware for boot this phone.and much phone have firmware with new extensi file,exm cpb file.. i hope infinity tim can create custom load fdl1 and fdl2 from factory file for boot,this usseful for resset frp without flashing..

07-21-2018, 18:21	#11 (permalink)
Dzomega No Life Poster Join Date: Jun 2016 Location: UK Posts: 613 Member: 2581848 Status: Offline Thanks Meter: 249	any one have this firmware for supertab sdp krc1032

07-24-2018, 17:58	#12 (permalink)
Dzomega No Life Poster Join Date: Jun 2016 Location: UK Posts: 613 Member: 2581848 Status: Offline Thanks Meter: 249	ihave new tab itry to read info when i restar the tab black image cm2 remove the fdl!!!!!!!!!

08-02-2018, 16:38	#13 (permalink)
tad60 Junior Member Join Date: Jan 2009 Posts: 7 Member: 956826 Status: Offline Sonork: tad 60 Thanks Meter: 4	only for format and frp reset hard reset use in pac file krc 1021 downlowd from **tun-droid** after use cm2spd(select sc7030.....android 5.x)

06-04-2019, 12:27	#14 (permalink)
Dzomega No Life Poster Join Date: Jun 2016 Location: UK Posts: 613 Member: 2581848 Status: Offline Thanks Meter: 249	any update itry with new version InfinityBox CM2SP2 same!! problem

09-30-2019, 09:52	#15 (permalink)
Saberask Junior Member Join Date: Oct 2008 Posts: 11 Member: 883827 Status: Offline Thanks Meter: 3	https://*********/kk6UF2itOUQ