symphony w85 pass protetct - GSM-Forum

SAJONDUTTA · 09-29-2015, 18:18

how can remove pass without userdata loss i try cm2 1.32 v reset pass thik userdata ok but same lock

SAJONDUTTA · 09-30-2015, 05:18

Quote:

Originally Posted by SAJONDUTTA

how can remove pass without userdata loss i try cm2 1.32 v reset pass thik userdata ok but same lock

help any one ......................

avtarkaint · 09-30-2015, 05:28

post log if u need help

JayDi · 09-30-2015, 06:22

There is 2 types : User Locks - PIN/PASS/Gesture and e.t.c. and PrivacyLock - every from those 2 have own button. Not hard to select correct one, instead of waste much time.

MATELECOM1 · 09-30-2015, 06:30

seem pob face me huwai y511-u30 format and flash but steel lock .... use sptool do format with sp tool seem and formet and flash .thik and do down-lode in sp tool seem ..... use many china porfconel .. tool etch miercal and volcano gpg dragon .. noting happiness

JayDi · 09-30-2015, 07:02

Quote:

Originally Posted by MATELECOM1

seem pob face me huwai y511-u30 format and flash but steel lock .... use sptool do format with sp tool seem and formet and flash .thik and do down-lode in sp tool seem ..... use many china porfconel .. tool etch miercal and volcano gpg dragon .. noting happiness

What you smoke? There is INFINITY section. And INFINITY can easy remove "PRIVACY" lock EVEN WITHOUT ANY BYTE OF USERDATA LOST.

SAJONDUTTA · 09-30-2015, 08:17

w85 user lock log 1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 11 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 90014A4834473164048603A32AA021A7
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0090 , OEM : 014A
[eMMC] : FLASH_INF : d1G4
[eMMC] : FLASH_CID : 90014A4834473164048603A32AA021A7
[eMMC] : FLASH_EXT : 00200000/00200000
[eMMC] : FLASH_LEN : 0x00000000E7000000
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

LSSA Ok!
LSSW Ok!
LSSS Ok!
Security Settings : Clear Ok!

[Info] : Android 5.x / MT67xx : If phone stuck on "Logo"
1. Wait 2-3 minutes. Power Off phone by long press "Power" button
2. Power On phone again
3. Or wait up to 3-7 minutes, until phone start by itself
4. Also recommended reboot phone twice before start use it
just full info
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Device boot not done
Check Drivers
Try again

Boot Error!

Operation Failed
Elapsed: 00:00:29
Reconnect Power/Cable!

Operation : Check / Read Info [ v1.32 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 9 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0xFE
SecCfgVal : 0x00000000
BromVersion : 0x05
BLVersion : 0xFE
Preloader Status : Not active (Erased)
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 90014A4834473164048603A32AA021A7
DA Stat : v4.2 on BBID : 0x88
DRAM not initialized , configure DRAM Settings
DRAM EmiReq Ok , 0x00A8
DRAM Init Ok , 0x20000000
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0090 , OEM : 014A
[eMMC] : FLASH_INF : d1G4
[eMMC] : FLASH_CID : 90014A4834473164048603A32AA021A7
[eMMC] : FLASH_EXT : 00200000/00200000
[eMMC] : FLASH_LEN : 0x00000000E7000000
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Done!
Elapsed: 00:00:10
Reconnect Power/Cable!

JayDi · 09-30-2015, 08:32

@SAJONDUTTA, enough smoke too. Check thread again from start and you will find all answers in one post.
Don't waste our and your time.

SAJONDUTTA · 09-30-2015, 08:41

JayDi sir do some thing i need user data recover

SAJONDUTTA · 09-30-2015, 08:43

explane me now what can i do set same lock

JayDi · 09-30-2015, 08:52

Send phone to someone, who can press need button and tick need option, please. Save your time.

SAJONDUTTA · 09-30-2015, 09:00

Quote:

Originally Posted by JayDi

Send phone to someone, who can press need button and tick need option, please. Save your time.

this not solution i respect infinity teem why u naver help

SAJONDUTTA · 09-30-2015, 09:03

so u naver help at last i do hard reset all my user data delet thanks jaide

princesaddam · 09-30-2015, 09:14

Hello
which type of lock u have is it privacy r Pin Cm2 both supported with out data loss u can save ur data with out a byte also

JayDi · 09-30-2015, 09:23

Quote:

Originally Posted by SAJONDUTTA

so u naver help at last i do hard reset all my user data delet thanks jaide

You must learn, not just waste time. If you can't read your thread, and simply tell exact problem, what done, what result and what tried - then better not ask anything at all.

09-29-2015, 18:18	#1 (permalink)
SAJONDUTTA No Life Poster Join Date: Dec 2008 Location: bangladesh Posts: 1,916 Member: 926902 Status: Offline Sonork: 100.1655575 Thanks Meter: 517	symphony w85 pass protetct how can remove pass without userdata loss i try cm2 1.32 v reset pass thik userdata ok but same lock

09-30-2015, 05:28	#3 (permalink)
avtarkaint No Life Poster Join Date: Feb 2007 Location: COOLSAND CPU Posts: 1,844 Member: 452162 Status: Offline Sonork: 100.1592470 Thanks Meter: 440	post log if u need help

09-30-2015, 06:22	#4 (permalink)
JayDi No Life Poster Join Date: Mar 2007 Location: Where you live Posts: 18,542 Member: 462970 Status: Offline Thanks Meter: 20,352	There is 2 types : User Locks - PIN/PASS/Gesture and e.t.c. and PrivacyLock - every from those 2 have own button. Not hard to select correct one, instead of waste much time.

09-30-2015, 06:30	#5 (permalink)
MATELECOM1 Cheater -Don't Deal with him- Join Date: Dec 2011 Location: APPEL Posts: 1,914 Member: 1707492 Status: Offline Thanks Meter: 606	seem pob face me huwai y511-u30 format and flash but steel lock .... use sptool do format with sp tool seem and formet and flash .thik and do down-lode in sp tool seem ..... use many china porfconel .. tool etch miercal and volcano gpg dragon .. noting happiness

09-30-2015, 08:17	#7 (permalink)
SAJONDUTTA No Life Poster Join Date: Dec 2008 Location: bangladesh Posts: 1,916 Member: 926902 Status: Offline Sonork: 100.1655575 Thanks Meter: 517	w85 user lock log 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 11 ] Sync... Inital regs read done Boot Info : BB_CPU_ID : 6572 BB_CPU_HW : CA01 BB_CPU_SW : 8A00 BB_CPU_SB : 0000 BB_CPU_NM : [MediaTek] MT6572_S00 Processing BROM stage BLVersion : 0x01 SecCfgVal : 0x00000000 BromVersion : 0xFF BLVersion : 0x01 Preloader Status : Alive Processing DA stage DA Select done , sending DA Ver : MTK_AllInOne_DA_v7.1533.03 NAND_ID : 00000000000000000000000000000000 eMMC_ID : 90014A4834473164048603A32AA021A7 DA Stat : v4.2 on BBID : 0x88 DA Sent. Configure setting now ... DA started successuflly eMMC FlashIC initialized [eMMC] : FLASH_VEN : 0090 , OEM : 014A [eMMC] : FLASH_INF : d1G4 [eMMC] : FLASH_CID : 90014A4834473164048603A32AA021A7 [eMMC] : FLASH_EXT : 00200000/00200000 [eMMC] : FLASH_LEN : 0x00000000E7000000 INT RAM : 0x00020000 EXT RAM : 0x20000000 BOOT TYPE : EMMC_FLASH_BOOT SOC VERIFY : C1 Boot Ok! LSSA Ok! LSSW Ok! LSSS Ok! Security Settings : Clear Ok! [Info] : Android 5.x / MT67xx : If phone stuck on "Logo" 1. Wait 2-3 minutes. Power Off phone by long press "Power" button 2. Power On phone again 3. Or wait up to 3-7 minutes, until phone start by itself 4. Also recommended reboot phone twice before start use it just full info 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Device boot not done Check Drivers Try again Boot Error! Operation Failed Elapsed: 00:00:29 Reconnect Power/Cable! Operation : Check / Read Info [ v1.32 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 9 ] Sync... Inital regs read done Boot Info : BB_CPU_ID : 6572 BB_CPU_HW : CA01 BB_CPU_SW : 8A00 BB_CPU_SB : 0000 BB_CPU_NM : [MediaTek] MT6572_S00 Processing BROM stage BLVersion : 0xFE SecCfgVal : 0x00000000 BromVersion : 0x05 BLVersion : 0xFE Preloader Status : Not active (Erased) Processing DA stage DA Select done , sending DA Ver : MTK_AllInOne_DA_v7.1533.03 NAND_ID : 00000000000000000000000000000000 eMMC_ID : 90014A4834473164048603A32AA021A7 DA Stat : v4.2 on BBID : 0x88 DRAM not initialized , configure DRAM Settings DRAM EmiReq Ok , 0x00A8 DRAM Init Ok , 0x20000000 DA Sent. Configure setting now ... DA started successuflly eMMC FlashIC initialized [eMMC] : FLASH_VEN : 0090 , OEM : 014A [eMMC] : FLASH_INF : d1G4 [eMMC] : FLASH_CID : 90014A4834473164048603A32AA021A7 [eMMC] : FLASH_EXT : 00200000/00200000 [eMMC] : FLASH_LEN : 0x00000000E7000000 INT RAM : 0x00020000 EXT RAM : 0x20000000 BOOT TYPE : EMMC_FLASH_BOOT SOC VERIFY : C1 Boot Ok! [AP] : Initial info read Ok! Done! Elapsed: 00:00:10 Reconnect Power/Cable!

09-30-2015, 08:32	#8 (permalink)
JayDi No Life Poster Join Date: Mar 2007 Location: Where you live Posts: 18,542 Member: 462970 Status: Offline Thanks Meter: 20,352	@SAJONDUTTA, enough smoke too. Check thread again from start and you will find all answers in one post. Don't waste our and your time.

09-30-2015, 08:41	#9 (permalink)
SAJONDUTTA No Life Poster Join Date: Dec 2008 Location: bangladesh Posts: 1,916 Member: 926902 Status: Offline Sonork: 100.1655575 Thanks Meter: 517	JayDi sir do some thing i need user data recover

09-30-2015, 08:43	#10 (permalink)
SAJONDUTTA No Life Poster Join Date: Dec 2008 Location: bangladesh Posts: 1,916 Member: 926902 Status: Offline Sonork: 100.1655575 Thanks Meter: 517	explane me now what can i do set same lock

09-30-2015, 08:52	#11 (permalink)
JayDi No Life Poster Join Date: Mar 2007 Location: Where you live Posts: 18,542 Member: 462970 Status: Offline Thanks Meter: 20,352	Send phone to someone, who can press need button and tick need option, please. Save your time.

09-30-2015, 09:03	#13 (permalink)
SAJONDUTTA No Life Poster Join Date: Dec 2008 Location: bangladesh Posts: 1,916 Member: 926902 Status: Offline Sonork: 100.1655575 Thanks Meter: 517	so u naver help at last i do hard reset all my user data delet thanks jaide

09-30-2015, 09:14	#14 (permalink)
princesaddam No Life Poster Join Date: Apr 2009 Location: Inside Infinity Posts: 1,688 Member: 1010626 Status: Offline Sonork: using fb Thanks Meter: 735	Hello which type of lock u have is it privacy r Pin Cm2 both supported with out data loss u can save ur data with out a byte also