Tecno T701MTK 6260 Dont Decetc ..... - GSM-Forum

eyvaltavahom1 · 07-25-2019, 08:40

Chinese Miracle II [MTK module] v 1.58

Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 341 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0000
BB_CPU_SN : 5A9FE06C5FC5C106492B7F1BBE87A1A7
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
InitRes : 00000000
DEV[0] : F800 4300 1700 0000
DEV[1] : 0000 0000 0000 0000
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B
SOC_VERIFY : 0xAA
SOC Verification failed!
Check cable, Battery, Connection!
Boot Error!

Operation Failed
Elapsed: 00:00:29
Reconnect Power/Cable!

eyvaltavahom1 · 07-25-2019, 08:41

phone have user lock... and dont detect....
please help...

eyvaltavahom1 · 07-25-2019, 14:29

team support please help........................

**InfinitySupport** · 07-26-2019, 17:06

You are using quite old version 1.58.
Have you tried CM2MT2 v2.06 ?

eyvaltavahom1 · 07-27-2019, 07:24

Quote:

Originally Posted by InfinitySupport

You are using quite old version 1.58.
Have you tried CM2MT2 v2.06 ?

yes....

Infinity-Box Chinese Miracle MediaTek Service Module [ MTK ] v2.06

Load IDBase v123080 Ok!

Operation : Identify [ v2.06 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM174)
MODE : BOOTROM
PORT : 174
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT0000 , SBID : 0x0000 , HWVR : 0x0000 , SWVR : 0x0000
TYPE : LEGACY MTK
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN [+PRL]
BROM : BOOTROM
MODE : 0_base : BASE_v1712 | Manual : Disabled
Fail to disable Dog!
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin

AGENT : Selected AGENT doesn't have required configuration!
Check and select CORRECT SETTINGS for your device!

Reconnect Power/Cable!

eyvaltavahom1 · 07-27-2019, 07:30

Operation : Identify [ v2.06 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM174)
MODE : BOOTROM
PORT : 174
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT0000 , SBID : 0x0000 , HWVR : 0x0000 , SWVR : 0x0000
TYPE : LEGACY MTK
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN [+PRL]
BROM : BOOTROM
MODE : TECNO : LB6 | Manual : Disabled
Fail to disable Dog!
AGENT : Look for suitable BootChain in DA ...
AGENT : DA_SWSEC.bin

AGENT : Selected AGENT doesn't have required configuration!
Check and select CORRECT SETTINGS for your device!

Reconnect Power/Cable!

eyvaltavahom1 · 07-27-2019, 13:54

i used 3 da tecno in cm2 but not detect too.....................

Yusuf Lawal · 07-27-2019, 14:35

Use cm2 mtk v1.58 and try with bootkey

PASSIONATE_BOYS · 07-27-2019, 16:37

Hello,
What is problem in phone?
Keep on pressing boot key for longer time until process is completed with CM2MTK v1.58.

Br.
Infinity-Box Team.

eyvaltavahom1 · 07-28-2019, 06:58

Quote:

Originally Posted by PASSIONATE_BOYS

Hello,
What is problem in phone?
Keep on pressing boot key for longer time until process is completed with CM2MTK v1.58.

Br.
Infinity-Box Team.

i used every key in phone...1 2 3 4 5 ..... * #.....
but nothing happened..... and dont connect

eyvaltavahom1 · 07-28-2019, 06:58

phone have user lock i want to format or wipe

Yusuf Lawal · 07-28-2019, 08:20

In some cases bootkey require key combination

eyvaltavahom1 · 07-28-2019, 09:44

Quote:

Originally Posted by Yusuf Lawal

In some cases bootkey require key combination

what key combination??? for example 2+5 ?

how to find it..............

nessyb · 07-28-2019, 17:33

download this tool then unzip
load da file 1 by 1 try booting with Cm2
FlashTool_v5.1308.00

nessyb · 07-28-2019, 17:35

Quote:

Originally Posted by eyvaltavahom1

what key combination??? for example 2+5 ?

how to find it..............

Star key on these is boot key

try

if failed try connect without press boot key

07-25-2019, 08:40	#1 (permalink)
eyvaltavahom1 Freak Poster Join Date: Jan 2014 Location: iran Posts: 335 Member: 2099377 Status: Offline Thanks Meter: 10	Tecno T701MTK 6260 Dont Decetc ..... Chinese Miracle II [MTK module] v 1.58 Operation : Check / Read Info [ v1.58 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey ( '*' ) Wait for phone... Phone found! [ 341 ] Sync... Sync Ok, read regs... Inital regs read done Boot Info : BB_CPU_ID : 6260 BB_CPU_HW : CB00 BB_CPU_SW : 0000 BB_CPU_SB : 8000 BB_CPU_NM : [MediaTek] MT6260_S0000 BB_CPU_SN : 5A9FE06C5FC5C106492B7F1BBE87A1A7 BROM Protocol Version : 05 Setting... Setting done , result code 0x000E BROM stage done Seek and prepare DownloadAgent DownloadAgent matching HW Found! DA verify and select done Sending DA to target ... InitRes : 00000000 DEV[0] : F800 4300 1700 0000 DEV[1] : 0000 0000 0000 0000 DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B SOC_VERIFY : 0xAA SOC Verification failed! Check cable, Battery, Connection! Boot Error! Operation Failed Elapsed: 00:00:29 Reconnect Power/Cable!

07-25-2019, 08:41	#2 (permalink)
eyvaltavahom1 Freak Poster Join Date: Jan 2014 Location: iran Posts: 335 Member: 2099377 Status: Offline Thanks Meter: 10	phone have user lock... and dont detect.... please help...

07-25-2019, 14:29	#3 (permalink)
eyvaltavahom1 Freak Poster Join Date: Jan 2014 Location: iran Posts: 335 Member: 2099377 Status: Offline Thanks Meter: 10	team support please help........................

07-26-2019, 17:06	#4 (permalink)
InfinitySupport Product Manager Join Date: Mar 2005 Location: infinity-box Posts: 38,635 Member: 130995 Status: Offline Thanks Meter: 35,227	You are using quite old version 1.58. Have you tried CM2MT2 v2.06 ?

07-27-2019, 07:30	#6 (permalink)
eyvaltavahom1 Freak Poster Join Date: Jan 2014 Location: iran Posts: 335 Member: 2099377 Status: Offline Thanks Meter: 10	Operation : Identify [ v2.06 ] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek USB Port (COM174) MODE : BOOTROM PORT : 174 Waiting BOOT ack ... BROM : Skip ACK verify BROM : Init BROM BROM init passed! CHIP : MT0000 , SBID : 0x0000 , HWVR : 0x0000 , SWVR : 0x0000 TYPE : LEGACY MTK BROM : SecLevel : 0x00000000 BROM : SecMode : PLAIN [+PRL] BROM : BOOTROM MODE : TECNO : LB6 \| Manual : Disabled Fail to disable Dog! AGENT : Look for suitable BootChain in DA ... AGENT : DA_SWSEC.bin AGENT : Selected AGENT doesn't have required configuration! Check and select CORRECT SETTINGS for your device! Reconnect Power/Cable!

07-27-2019, 13:54	#7 (permalink)
eyvaltavahom1 Freak Poster Join Date: Jan 2014 Location: iran Posts: 335 Member: 2099377 Status: Offline Thanks Meter: 10	i used 3 da tecno in cm2 but not detect too.....................

07-27-2019, 14:35	#8 (permalink)
Yusuf Lawal No Life Poster Join Date: Oct 2011 Location: Nigeria Posts: 6,593 Member: 1677653 Status: Offline Thanks Meter: 2,769	Use cm2 mtk v1.58 and try with bootkey

07-27-2019, 16:37	#9 (permalink)
PASSIONATE_BOYS No Life Poster Join Date: Jul 2007 Location: Infinity-Box Support- Posts: 9,321 Member: 541591 Status: Offline Sonork: 100.1611509 Thanks Meter: 7,361	Hello, What is problem in phone? Keep on pressing boot key for longer time until process is completed with CM2MTK v1.58. Br. Infinity-Box Team.

07-28-2019, 06:58	#11 (permalink)
eyvaltavahom1 Freak Poster Join Date: Jan 2014 Location: iran Posts: 335 Member: 2099377 Status: Offline Thanks Meter: 10	phone have user lock i want to format or wipe

07-28-2019, 08:20	#12 (permalink)
Yusuf Lawal No Life Poster Join Date: Oct 2011 Location: Nigeria Posts: 6,593 Member: 1677653 Status: Offline Thanks Meter: 2,769	In some cases bootkey require key combination

07-28-2019, 17:33	#14 (permalink)
nessyb No Life Poster Join Date: Jan 2013 Location: zimbabwe south africa Posts: 1,441 Member: 1866877 Status: Offline Sonork: 100.1681933 Thanks Meter: 707	download this tool then unzip load da file 1 by 1 try booting with Cm2 FlashTool_v5.1308.00