Tested Solution for Sigmatel "Not Calibrated"- - Page 2 - GSM-Forum

PASSIONATE_BOYS · 03-31-2010, 15:35

Quote:

Originally Posted by InfinityHelp

hello guys!

I just dont udnderstand why you need to solve this problem by eeprom writing.
please try Calibrate touchscreen in "mode-auto" and problem must be solved.
please post this log here

I never wanted him to ONLY try with eeprom file, infact since I've had repaired same model with that eeprom file so was trying to help him with that eeprom file.

@ashokassag try with all calibration method one by one and post result since now you are using latest chinese miracle module, may be prior you were using v3.07 so that might have not worked.

Wr.

InfinityHelp · 04-01-2010, 12:51

hello!

main mode to start from is Mode-Auto.
it require full flash backup, but it works in most cases

***MyGSM World*** · 04-01-2010, 16:24

How To Remove Touchscreen Calibration

&

How Read Full Flash ?

Need Help

Thanks In Advance

InfinityHelp · 04-02-2010, 05:48

Quote:

Originally Posted by mygsm world

How To Remove Touchscreen Calibration

&

How Read Full Flash ?

Need Help

Thanks In Advance

hello!

are you infinity box user?

***MyGSM World*** · 04-02-2010, 09:47

Quote:

Originally Posted by InfinityHelp

hello!

are you infinity box user?

Yes, I Infinity Box User

PASSIONATE_BOYS · 04-02-2010, 13:36

Quote:

Originally Posted by mygsm world

How To Remove Touchscreen Calibration

&

How Read Full Flash ?

Need Help

Thanks In Advance

Go to "Service" tab in Chinese Miracle after finding pinout and press "Read Full Flash" and save it. After reading full flash go to "Repair" tab and press "Calibrate Touchscreen" in mode-auto and when it ask for firmware backup file just select the read full flash file. If "mode auto" for touch calibration doesn't works try with other modes-1,2,3 & 4.

Wr.

ashokassag · 04-03-2010, 05:25

ok wait i wll try today and post thee result ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,

***MyGSM World*** · 04-03-2010, 12:05

Quote:

Originally Posted by PASSIONATE_BOYS

Go to "Service" tab in Chinese Miracle after finding pinout and press "Read Full Flash" and save it. After reading full flash go to "Repair" tab and press "Calibrate Touchscreen" in mode-auto and when it ask for firmware backup file just select the read full flash file. If "mode auto" for touch calibration doesn't works try with other modes-1,2,3 & 4.

Wr.

Good Working, My Problem Solved

Thanks, PASSIONATE_BOYS

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
1000000000000% tested solution for emergency mode for w339	lalitjsraks	Various CDMA/TDMA Cell Phones	1	09-18-2009 08:14
Atlast i got the solution for Sigmatel S4 flight mode	arifraj	Chinese Models & Cloned Phones	1	09-20-2008 13:39
Solution for repair "not power on" phone T100 - free!!!!!!!!!	sed_alex	VLSI, Conexant, Skyworks and Old Models	2	09-30-2002 22:36
Tested solution for Games and Tones freezing	kingbode	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	10	02-16-2002 17:51
tested solution for N105	ranger	VLSI, Conexant, Skyworks and Old Models	2	01-19-2002 08:05

04-01-2010, 12:51	#17 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! main mode to start from is Mode-Auto. it require full flash backup, but it works in most cases

04-01-2010, 16:24	#18 (permalink)
*MyGSM World* Super Moderator Join Date: Jul 2009 Location: .:India:. Posts: 11,383 Member: 1078689 Status: Offline Sonork: 100.1626373 Thanks Meter: 2,826	How To Remove Touchscreen Calibration & How Read Full Flash ? Need Help Thanks In Advance

04-03-2010, 05:25	#22 (permalink)
ashokassag No Life Poster Join Date: Apr 2008 Posts: 784 Member: 762520 Status: Offline Thanks Meter: 95	ok wait i wll try today and post thee result ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,