Thank buffer2k11 , SPD frp done

[psytr0nic]

FRP removed , info all fine on my Windows 7 64 bits
thank you br buffer2k11

Chinese Miracle II [SPD module] v 1.22

Operation : Check/Read Info [ v1.22 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 14 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
Boot failed!

Boot failed!

Reconnect Power/Cable!


Operation : Check/Read Info [ v1.22 ]

1. Remove battery. Insert battery back
2. Insert cable
3. In case of SVC init problems - connect with hold "VolDown" button!

==== Wait for phone...

Phone found! [ 14 ]
Port Opened
Sync...
InitSvc Done
Wait for phone...
Sync...
Phone Initial Info :
Platform : MOCORTM_14B_7731C_W16.12.2_Debug
Project : sc7731C_CP0_modem
HWInfo : sc7731C_CP0_modem
Compile : 03-11-2016 21:00:19
Phone Security Info :
IMEI [1] : 359869060275224
IMEI [2] : 359869060275232
BT_ADDR : 000000000000
SelfInfo :
BatVoltage : 3.779 V

Done

Reconnect Power/Cable!

Operation : Check/Read Info [ v1.22 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 14 ]
Port Opened
Sync...
Initial Boot Failed!

Reconnect Power/Cable!


Operation : Check/Read Info [ v1.22 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 14 ]
Port Opened
Sync...
Initial Boot Failed!

Reconnect Power/Cable!


Operation : Check/Read Info [ v1.22 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 14 ]
Port Opened
Sync...
Initial Boot Failed!

Reconnect Power/Cable!


Operation : Check/Read Info [ v1.22 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Device boot not done
Check Drivers
Try again


Reconnect Power/Cable!


Operation : Check/Read Info [ v1.22 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 14 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v1.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FLASH : eMMC Flash , Structure : Ok!

Reading extended info ...

Model Name : X510
Model Brand : Infinix
Model Device: X510
AndrVersion : 5.1
BaseBand CPU: SP7731CEB
CompileDate : 5/16/2016 6:06:46 AM
Project Ver : VERSION_V06_20160516
Model Ext : X510

ExtraInfo : HWInfo not exists, normal phone

Elapsed: 00:00:23

Reconnect Power/Cable!


Operation : Format File System / Reset Settings [ v1.22 ]
Settings : SmartFormat is On

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 14 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v1.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Checking Structure ...
Detected eMMC Flash , Structure detect Ok!

eMMC phone detected! Will use 'Safe Format' mode!

Mount : /data
Size : 0x0000000067FF7000
State : 0x0001

Mount : /cache
Size : 0x0000000009600000
State : 0x0001

Prepare Ok! Format Ok!
Don't touch phone, until it fully bootup to "Welcome Screen"!

Android 5.x : Reset FRP Lock
Reset Ok!


Done!

Elapsed: 00:00:29

Reconnect Power/Cable!

[buffer2k11]

welcome @psytr0nic

[psytr0nic]

pac read .

Operation : Read FullFlash [ v1.22 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 14 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v1.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!

- > Wait phone connected ...

Phone found! [ 14 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v1.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ...

Phone found! [ 14 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v1.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name : X510
Model Brand : Infinix
Model Device: X510
AndrVersion : 5.1
BaseBand CPU: SP7731CEB
Project Ver : VERSION_V06_20160516
Model Ext : X510

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_Trunk_W15.49.3_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : oem.bin
[Read Ok] : sysinfo.bin
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1942 MiB
Saved to : x:\GSM\INFINITY\SP7731CEB_X510_5.1_VERSION_V06_201 60516_X510\
Done!

Elapsed: 00:15:32

Reconnect Power/Cable!

[skidosted]

please anyone with link to download x510 sc7731c?