GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Infinity-Box

Reply
 
LinkBack Thread Tools Display Modes
Old 05-26-2008, 12:24   #1 (permalink)
No Life Poster
 
kalpeshoza's Avatar
 
Join Date: Mar 2007
Location: Buy Buy Thank U GsmHostig ....
Age: 41
Posts: 1,701
Member: 462292
Status: Offline
Thanks Meter: 397
Touchscreen Bypass damaged calibration solution 100% work for me!!!


Thanks
@InfinitySupport !!! for wonder full update ""Bypass damaged Touchscreen calibration"".

i have 2 pic N-73 sucessfully repair bye new version 2.45. ((problem- touchscreen not work so mobile is stop on
Touchscreen calibration. Today mobile is alive )).

COM19 [VCP3] selected
Action: touchscreen calibration
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing[6219:8B02:8B01]...
CPU: MT6219
high speed boot enabled
chip: 0031:3A41:3C08
CPU: MT6226MA detected
Connecting, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6219B,E02
Date: 2005.04.12
Version: 1.0
Version: ZX860_THL_1.1
Version: ZX26_05C_HW
detecting structure #2...
done
60 byte(s) read
imei: 35972500000408
connection Ok
detecting structure #5...
0done
204 byte(s) read
writing data...
verification...
verification Ok
Finished, time used: 12 sec
Remove/Install battery now !

  Reply With Quote
The Following 3 Users Say Thank You to kalpeshoza For This Useful Post:
Show/Hide list of the thanked
Old 01-28-2009, 11:25   #2 (permalink)
No Life Poster
 
kalpeshoza's Avatar
 
Join Date: Mar 2007
Location: Buy Buy Thank U GsmHostig ....
Age: 41
Posts: 1,701
Member: 462292
Status: Offline
Thanks Meter: 397
working ok in sigmatelS3

COM46 [VCP0] selected
module v2.73
Action: touchscreen calibration
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A03:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:A903:0007
Connecting, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6225,E03
Date: 2006.06.14
Version: 1.0
Version: FXD-S3_FOREIGN_MR106_004_5S-MC-C01-RF3198_V1.0.013_080306
Version: GINWAVE25_06B_HW
detecting structure #2...
0 done
44 byte(s) read
imei: 13579024681122
warning: current phone imei is incorrect !
It's need to repair imei for correct phone functionality !
connection Ok
detecting structure #5 (mode-1)...
0 1 2 done
163 byte(s) read
writing data...
verification...
verification Ok
Finished, time used: 11 sec
Remove/Install battery now !
  Reply With Quote
The Following 2 Users Say Thank You to kalpeshoza For This Useful Post:
Old 01-31-2009, 13:24   #3 (permalink)
No Life Poster
 
kalpeshoza's Avatar
 
Join Date: Mar 2007
Location: Buy Buy Thank U GsmHostig ....
Age: 41
Posts: 1,701
Member: 462292
Status: Offline
Thanks Meter: 397
working on "MT 1588 2SIM"

JUST use method 2 working fine


COM46 [VCP0] selected
module v2.73
Action: touchscreen calibration
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A03:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:9603:0007
Connecting, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6225,E03
Date: 2006.06.14
Version: 1.0
Version: 931028_79I_V0003
Version: TIANYU25_06B_HW
detecting structure #2...
0 done
44 byte(s) read
imei: 35848801000090
connection Ok
detecting structure #5 (mode-2)...
done
160 byte(s) read
writing data...
verification...
verification Ok
Finished, time used: 12 sec
Remove/Install battery now !
  Reply With Quote
The Following 2 Users Say Thank You to kalpeshoza For This Useful Post:
Old 02-20-2009, 06:56   #4 (permalink)
No Life Poster
 
kalpeshoza's Avatar
 
Join Date: Mar 2007
Location: Buy Buy Thank U GsmHostig ....
Age: 41
Posts: 1,701
Member: 462292
Status: Offline
Thanks Meter: 397
working ok in ZTC 168 SINGLE SIM

COM46 [VCP0] selected
module v2.73
Action: touchscreen calibration
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A03:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:8603:000F
Connecting, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6225,E03
Date: 2006.06.14
Version: 1.0
Version: MAUI.06B.W07.24.MP.V16.F1
Version: MP_HW
detecting structure #2...
0 done
44 byte(s) read
imei: 13579024681122
warning: current phone imei is incorrect !
It's need to repair imei for correct phone functionality !
connection Ok
detecting structure #5 (mode-2)...
done
160 byte(s) read
writing data...
verification...
verification Ok
Finished, time used: 9 sec
Remove/Install battery now !

  Reply With Quote
The Following 2 Users Say Thank You to kalpeshoza For This Useful Post:
Old 04-09-2009, 11:35   #5 (permalink)
No Life Poster
 
kalpeshoza's Avatar
 
Join Date: Mar 2007
Location: Buy Buy Thank U GsmHostig ....
Age: 41
Posts: 1,701
Member: 462292
Status: Offline
Thanks Meter: 397
Again working on gsm jg268

Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A03:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:9B03:000C
Connecting, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6225,E03
Date: 2006.06.14
Version: 1.0
Version: MAUI_06B_ZM24H_V1.3
Version: MT25_06B_HW
detecting structure #2...
0 done
44 byte(s) read
imei: 13579024681122
warning: current phone imei is incorrect !
It's need to repair imei for correct phone functionality !
connection Ok
detecting structure #5 (mode-2)...
done
160 byte(s) read
writing data...
verification...
verification Ok
Finished, time used: 25 sec
Remove/Install battery now !

  Reply With Quote
The Following 2 Users Say Thank You to kalpeshoza For This Useful Post:
Old 04-15-2009, 11:45   #6 (permalink)
No Life Poster
 
kalpeshoza's Avatar
 
Join Date: Mar 2007
Location: Buy Buy Thank U GsmHostig ....
Age: 41
Posts: 1,701
Member: 462292
Status: Offline
Thanks Meter: 397
Saha model as810

Today calibration repair on saha as810 first i have try with calibration touchscreen but give eror RANGE CHECK ERROR.



then

first format

COM4 [VCP1] selected
module v2.80
Action: reset settings
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6226:8A02:8A01]...
CPU: MT6226
high speed boot Off
chip: 0031:6CC1:15AA
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6226,E02
Date: 2005.04.12
Version: 1.0
Version: M968CSL_6226b_11H
Version: M968c_01
detecting structure #2...
0 done
44 byte(s) read
imei: 13579024681122
warning: current phone imei is incorrect !
It's need to repair imei for correct phone functionality !
connection Ok
building list...
done
items to clear: 136
warning: wrong packet cs
items cleared: 136 of 136
building list...
done
items remains: 0
Finished, time used: 159 sec
Remove/Install battery now !

and then calibration touchscreen working file after format

COM4 [VCP1] selected
module v2.80
Action: touchscreen calibration
mode: 1
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6226:8A02:8A01]...
CPU: MT6226
high speed boot Off
chip: 0031:6CC1:15AA
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6226,E02
Date: 2005.04.12
Version: 1.0
Version: M968CSL_6226b_11H
Version: M968c_01
detecting structure #2...
0 done
44 byte(s) read
imei: 13579024681122
warning: current phone imei is incorrect !
It's need to repair imei for correct phone functionality !
connection Ok
detecting structure #5 (mode-1)...
0 1 2 done
163 byte(s) read
writing data...
verification...
verification Ok
Finished, time used: 20 sec
Remove/Install battery now !


br

kalpeshoza
  Reply With Quote
The Following User Says Thank You to kalpeshoza For This Useful Post:
Old 04-21-2009, 14:15   #7 (permalink)
No Life Poster
 
kalpeshoza's Avatar
 
Join Date: Mar 2007
Location: Buy Buy Thank U GsmHostig ....
Age: 41
Posts: 1,701
Member: 462292
Status: Offline
Thanks Meter: 397
Again working on sigmatel v88

COM4 [VCP1] selected
module v2.80
Action: touchscreen calibration
mode: 3
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A03:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:8E03:0001
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6225,E03
Date: 2006.06.14
Version: 1.0
Version: MAUI.06B.W07.24
Version: 6225_06B_HW
detecting structure #2...
0 done
44 byte(s) read
imei: 13579024681122
warning: current phone imei is incorrect !
It's need to repair imei for correct phone functionality !
connection Ok
detecting structure #5 (mode-3)...
warning: wrong packet cs
done
162 byte(s) read
reading data #2...
writing data...
verification...
verification Ok
Finished, time used: 15 sec
Remove/Install battery now !
  Reply With Quote
The Following 2 Users Say Thank You to kalpeshoza For This Useful Post:
Old 07-21-2009, 08:42   #8 (permalink)
No Life Poster
 
kalpeshoza's Avatar
 
Join Date: Mar 2007
Location: Buy Buy Thank U GsmHostig ....
Age: 41
Posts: 1,701
Member: 462292
Status: Offline
Thanks Meter: 397
GSM 2SIM 810i

COM21 [VCP1] selected
module v2.84
Action: touchscreen calibration
mode: 1
Calibration order: reverse
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A03:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:E403:000F
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6225,E03
Date: 2006.06.14
Version: 1.0
Version: V6S_V3.6.4_0411_SM
Version: HW_2.0
detecting structure #2...
0 6 done
44 byte(s) read
imei: 13579024681122
warning: current phone imei is incorrect !
It's need to repair imei for correct phone functionality !
connection Ok
detecting structure #5 (mode-1)...
19 18 17 16 done
160 byte(s) read
reading data #2...
writing data...
verification...
verification Ok
Power-On and test phone now
If calibration is not completed yet:
1. make "Reverse calibration order" UN-checked and try again
2. try another calibration mode
Finished, time used: 20 sec
Remove/Install battery now !

  Reply With Quote
The Following 2 Users Say Thank You to kalpeshoza For This Useful Post:
Old 07-29-2009, 22:39   #9 (permalink)
Product Manager
 
Join Date: Mar 2005
Location: infinity-box
Posts: 38,635
Member: 130995
Status: Offline
Thanks Meter: 35,229
How to calibrate touchscreen (if toucscreen panel is damaged):

1. connect cable from box to phone
2. run "Infinity-Box Shell" software
3. select required model
4. run required software module
5. select required model
6. go to software "Settings" page and select COM port
7. make full flash backup for emergency case
8. go to software "Service" page
9. select calibration "mode-1"
10. make "Reverse calibration order" un-checked
11. press "Calibrate touchscrren" button and follow instruction given by software
12. if software can not make calibration with "detection failed" error:
- select other calibration mode (f.e. "mode-2", "mode-3" etc. one by one)
- repeat calibration process
- test phone after each "mode" try
13. if calibration process finished without errors but touchscreen can not work well:
- DO NOT change calibration "mode" !
- make "Reverse calibration order" option checked
- repeat calibration process again
- test phone
14. if still no luck with calibration after all tries:
- make full flash backup for emergency case
- make "format ffs"
- Power-On phone
- Power-Off phone by "Power" button (do NOT remove battery)
- Repeat "Calibration" operation again
- if still no luck read full flash and send to support with subject: touchscreen calibration failed
  Reply With Quote
The Following 2 Users Say Thank You to InfinitySupport For This Useful Post:
Old 08-27-2009, 07:19   #10 (permalink)
No Life Poster
 
kalpeshoza's Avatar
 
Join Date: Mar 2007
Location: Buy Buy Thank U GsmHostig ....
Age: 41
Posts: 1,701
Member: 462292
Status: Offline
Thanks Meter: 397
Rocky 2008 working fine

COM45 [VCP1] selected
module v2.90
Action: touchscreen calibration
How to calibrate touchscreen:
- for this operation you need to have full flash backup from phone
- if you have full flash backup already press "Yes", select full flash file and follow instructions given by software
- if you do not have full flash backup yet press "No", read full flash and repeat calibration procedure

Do you have full flash backup ?
Loading file v.02...
SUNPLUS25_06B_PCB01_GPRS_MT6225_S00.POPHONE_KY_VER SION_1_8__fullflash_20090827-104834.B0M.bin loaded
detected record size adjusted
detected record size adjusted
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A03:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:3803:000B
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6225,E03
Date: 2006.06.14
Version: 1.0
Version: POPHONE_KY_version_1_8
Version: POPHONE_6225_06B_HW
44 byte(s) read
imei: 13579024681122
warning: current phone imei is incorrect !
It's need to repair imei for correct phone functionality !
connection Ok
160 byte(s) read
reading data #2...
512 byte(s) read
writing data...
verification...
verification Ok
Finished, time used: 17 sec
Remove/Install battery now !

  Reply With Quote
The Following User Says Thank You to kalpeshoza For This Useful Post:
Old 08-31-2009, 15:33   #11 (permalink)
Registered User
 
Join Date: Nov 2007
Location: ID
Posts: 180
Member: 624177
Status: Offline
Thanks Meter: 23
i have problem with THL ( HTC Diamond chinese model)
A1000_E802_JJFF5D_EVCOM_MT6225S00.01_0_20090112__f ullflash_20090825-175357.B0M.bin

after format fss: complete mode and then doing pen callibration mode-1
Code:
COM4 selected
module  v2.91
Action: touchscreen calibration
How to calibrate touchscreen:
- for this operation you need to have full flash backup from phone
- if you have full flash backup already press "Yes", select full flash file and follow instructions given by software
- if you do not have full flash backup yet press "No", read full flash and repeat calibration procedure

Do you have full flash backup ?
Loading file v.02...
THL_A1000_E802_JJFF5D_EVCOM_MT6225S00.01_0_20090112__fullflash_20090825-175357.B0M.bin loaded
detected record size adjusted
detected record size adjusted
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A03:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:F003:0001
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6225,E03
Date: 2006.06.14
Version: 1.0
Version: E890_EVSMT3B.01.1
Version: EVEN6225_GEMINI_HW
67 byte(s) read
imei: 13579024681122
warning: current phone imei is incorrect !
It's need to repair imei for correct phone functionality !
connection Ok
512 byte(s) read
213 byte(s) read
reading data #2...
reading data #3...
512 byte(s) read
writing data...
verification...
verification Ok
Finished, time used: 14 sec
Remove/Install battery now !
but touchscreen still not functioning
help.....
  Reply With Quote
The Following User Says Thank You to teknisi bloon For This Useful Post:
Old 08-31-2009, 21:14   #12 (permalink)
Product Supporter
 
Join Date: May 2005
Location: uae
Posts: 29,245
Member: 148515
Status: Offline
Thanks Meter: 19,531
hello!

Does phone asked for "touchscreen calibration" after format?
why you can not make it by touching test points by pen?
  Reply With Quote
Old 09-11-2009, 18:17   #13 (permalink)
Insane Poster
 
Join Date: Aug 2006
Location: india
Posts: 81
Member: 325604
Status: Offline
Thanks Meter: 14
i have suceeded by passing calibration for every mobile...thnaks to infinity for their great efforts..
  Reply With Quote
The Following User Says Thank You to SATISH BABU For This Useful Post:
Old 09-11-2009, 20:26   #14 (permalink)
No Life Poster
 
.::Raj::.'s Avatar
 
Join Date: Dec 2008
Location: India
Age: 35
Posts: 599
Member: 923397
Status: Offline
Sonork: 100.1584169
Thanks Meter: 451
brother i have a S3 sigmatel process 100% ok but not fix it problem
  Reply With Quote
Old 09-11-2009, 20:28   #15 (permalink)
Product Supporter
 
Join Date: May 2005
Location: uae
Posts: 29,245
Member: 148515
Status: Offline
Thanks Meter: 19,531
Quote:
Originally Posted by .::Raj::. View Post
brother i have a S3 sigmatel process 100% ok but not fix it problem
hello!

please post full log of calibration
  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
thread Thread Starter Forum Replies Last Post
Nokia 1680 camera solution...100% working.tested by me. mahbubalfa Nokia Hardware & Hardware Repair 64 08-04-2012 19:59
B3310 Solution that worked for me kobolt UST Pro II 0 12-18-2009 17:39
solution 100% working for HWK 2.5 shut down pc hicvb7 HWK 13 01-04-2008 01:44
4 locks closed solution - this work for me gladeo Sony Ericsson 11 05-21-2003 13:05
truim cosmo solution 100% working for exchange patric Exchange Section 0 03-16-2002 00:52

 



All times are GMT +1. The time now is 06:27.



Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.32013 seconds with 9 queries

SEO by vBSEO