"TRIOENE" tuch screen problem - GSM-Forum

zeerik · 05-03-2009, 13:47

logs are ok but still there is tuch screen text on the LCD

the mobile name is TRIOENE (MB-100) dual sim it is new firmware and not present in support area

COM20 [VCP0] selected
module v2.81
Action: touchscreen calibration
mode: 3
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A03:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:8D03:0003
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6225,E03
Date: 2006.06.14
Version: 1.0
Version: E880_EVTST.01.0_25S00
Version: EVEN25_HW
detecting structure #2...
0 done
44 byte(s) read
imei: 35686000883334
connection Ok
detecting structure #5 (mode-3)...
warning: wrong packet cs
done
162 byte(s) read
reading data #2...
writing data...
verification...
verification Ok
Finished, time used: 11 sec
Remove/Install battery now !

ehsas_ghum · 05-03-2009, 14:26

brother try to use 2.73 chines miracle n then post many user face a problem in new one thanks

zeerik · 05-04-2009, 15:15

Quote:

Originally Posted by ehsas_ghum

brother try to use 2.73 chines miracle n then post many user face a problem in new one thanks

yes bro.........i have also tried with 2.73 with all the 4 modes turn by turn and also format ffs (safe) but process seems to be ok but there is still text on the LCD

InfinityHelp · 05-06-2009, 19:36

hello!

post full firmware version, i will check if it is supported for touchscreen calibration

05-03-2009, 13:47	#1 (permalink)
zeerik No Life Poster Join Date: May 2006 Location: Sambrial (Sialkot) Posts: 2,696 Member: 282066 Status: Offline Sonork: 100.1590696 Thanks Meter: 569	"TRIOENE" tuch screen problem logs are ok but still there is tuch screen text on the LCD the mobile name is TRIOENE (MB-100) dual sim it is new firmware and not present in support area COM20 [VCP0] selected module v2.81 Action: touchscreen calibration mode: 3 Model: Autodetect 6205-6227 NOR Checking data, wait... Phone should be Switched OFF ! Press and HOLD Power button now ! 19200 autodetect Initializing [6225:8A03:8A00]... CPU: MT6225 high speed boot On chip: 0001:8D03:0003 status: FF Connecting at 19200, wait... Release Power button now ! Phone detected, wait... Hardware: MT6225,E03 Date: 2006.06.14 Version: 1.0 Version: E880_EVTST.01.0_25S00 Version: EVEN25_HW detecting structure #2... 0 done 44 byte(s) read imei: 35686000883334 connection Ok detecting structure #5 (mode-3)... warning: wrong packet cs done 162 byte(s) read reading data #2... writing data... verification... verification Ok Finished, time used: 11 sec Remove/Install battery now !

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
A1200 after flash lost network and not work tuch screen	majidjony	Smart-Clip	20	03-03-2009 18:19
a1200 tuch screen bad	mojtaba200	Motorola P2k	5	06-21-2008 16:41
a1200 tuch screen bad	mojtaba200	Motorola Hardware Repair	2	06-18-2008 14:01
****p900 big probleam tuch screen not work**	kikoman	Sony Ericsson Hardware Repair	18	06-15-2008 16:28

05-03-2009, 14:26	#2 (permalink)
ehsas_ghum No Life Poster Join Date: Aug 2005 Location: Ena Neray Na Ho Dildar Ve Age: 37 Posts: 1,789 Member: 171512 Status: Offline Thanks Meter: 1,034	brother try to use 2.73 chines miracle n then post many user face a problem in new one thanks

05-06-2009, 19:36	#4 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! post full firmware version, i will check if it is supported for touchscreen calibration