TV900 frist sim formated done but freeze after try to format sconed sim
 

here my log
COM7 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: reset
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6226:8A02:8A01]...
CPU: MT6226
chip: 0031:C7C1:8C66
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
460800
Set baud Done
Identification...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
it's time to stop: 290000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area#1 is Ok
security area#1 backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.19F4A327.[GHOST_PCB01_GPRS_MT6226_S01.ENVISION_EV7810_C_TC_V 2_4_B02_M.BIN_BE8EBDC6].rpl
New firmware detected:
GHOST_PCB01_GPRS_MT6226_S01.ENVISION_EV7810_C_TC_V 2_4_B02_M.BIN
- make "Repair security area" operation
- send "backup_system_log_..." file to support
- make "Read full flash" operation
- send flash backup file(s) to support
- include in your e-mail full text from phone back label (phone name etc.)
identification#1 detection finished
device-id: 19F4A327
identification#1 protocol ver: 04
ver. sw1: GHOST_PCB01_GPRS_MT6226_S01.ENVISION_EV7810_C_TC_V 2_4_B02_M.BIN
ver. sw2: ENVISION_EV7810_C_TC_V2_4_B02_M, 39427141
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information not found
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: 01227E22202200:29EA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
flash: 01227E22202200:29EA0000000000
Identification Done
Manipulation...
Manipulation Done
Finalization...
Finalization Done
Write...
formatting...
flash: 01227E22202200:29EA0000000000
Write Done
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_system_log _19F4A327_GHOST_PCB01_GPRS_MT6226_S01.ENVISION_EV7 810_C_TC_V2_4_B02_M.BIN_BE8EBDC6_20080219-153517.B0X.bin
Finished, time used: 272 sec
Remove/Install battery now !

and
COM7 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: reset
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6205:8B00]...
CPU: MT6205
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: BF7353FFFF0052:18E59F00000000
warning: detected/calculated [00400000/00800000] chip size mismatch, chip detection error
flash: SST AMD/Fujitsu std [def 0040x010000 0400x001000] 8Mb
detecting chip #01 in region #00...
flash: BF7353FFFF0052:18E59F00000000
warning: detected/calculated [00400000/00800000] chip size mismatch, chip detection error
flash: SST AMD/Fujitsu std [def 0040x010000 0400x001000] 8Mb
detecting chip #02 in region #00...
flash: BF7353FFFF0052:18E59F00000000
warning: detected/calculated [00400000/00800000] chip size mismatch, chip detection error
flash: SST AMD/Fujitsu std [def 0040x010000 0400x001000] 8Mb
detecting chip #03 in region #00...
flash: BF7353FFFF0052:18E59F00000000
warning: detected/calculated [00400000/00800000] chip size mismatch, chip detection error
flash: SST AMD/Fujitsu std [def 0040x010000 0400x001000] 8Mb
number of flash chip/regions detected: 04/01
Initialize Done
Set baud...
460800
Set baud Done
Identification...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: BF7353FFFF0052:18E59F00000000
warning: detected/calculated [00400000/00800000] chip size mismatch, chip detection error
flash: SST AMD/Fujitsu std [def 0040x010000 0400x001000] 8Mb
detecting chip #01 in region #00...
flash: BF7353FFFF0052:18E59F00000000
warning: detected/calculated [00400000/00800000] chip size mismatch, chip detection error
flash: SST AMD/Fujitsu std [def 0040x010000 0400x001000] 8Mb
it's time to stop: 18F09FE518F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 00800000
detect device identification#1...
detection phase #1...
.
detection phase #2...
.................................................. .................................................. ............................
warning: identification#1 information not found, possible reasons:
.old firmware type w/o identification#1 data
.damaged firmware
.damaged hardware
if phone works fine just ignore this warning
detect device identification#1 finished
detect device identification#2...
detection phase #1...
.
warning: optional information not found
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset assigned: 00700000
flash: BF7353FFFF0052:18E59F00000000
warning: detected/calculated [00400000/00800000] chip size mismatch, chip detection error
checking area[00000000]: 00000000-007FFFFF...
eeprom/ffs found near: 003E0000
Detected eeprom/ffs address is non-standard: 003E0000
Posible reasons:
1. eeprom is Ok but address is non-standard
2. eeprom damaged and can't be detected
3. eeprom is Ok but detected incorrectly (f.e. unknown eeprom structure)
If you are not sure that detected address is correct:
1. press "NO" (and select standard address or terminate current operation)
2. make flash backup for emergency case
3. repeat required operation
Are you sure that detected eeprom address is correct ?
autodetected eeprom/ffs address[003E0000] confirmed by user
detecting eeprom/ffs size...
eeprom/ffs size: 00420000
ffs chip: 00
eeprom/ffs area: 00000000:003E0000-007FFFFF
flash: BF7353FFFF0052:18E59F00000000
warning: detected/calculated [00400000/00800000] chip size mismatch, chip detection error
Identification Done
Manipulation...
Manipulation Done
Finalization...
Finalization Done
Write...
formatting...
flash: BF7353FFFF0052:18E59F00000000
warning: detected/calculated [00400000/00800000] chip size mismatch, chip detection error
error: error# 0000FF3B
error: flash erase error: 003E0000
error: error# 0000FF3B
error: flash erase error: 003E0000
error: error# 0000FF3B
error: flash erase error: 003E0000
error: error# 0000FF3B
error: flash erase error: 003E0000
error: error# 0000FF3B
error: flash erase error: 003E0000
Write Fail
Finished, time used: 54 sec
Remove/Install battery now !
please help......

hello!

faulty flash ID: flash: BF7353FFFF0052:18E59F00000000
this is not real flash ID. this means you must re-solder second CPU flash.
or if you dont have skills for that at least try to heat it.
then repeat procedure

i re-solded . but same problem maybe this flash damage.thanks for support

@habeebo
try to use latest ChineseMiracle v2.29, it was some improvemenst regarding flash types. I am not sure that this may helps but anyway please try it.