ufone g3610 unlock done
 

COM5 [VCP1] selected
module v3.96
Action: read unlock codes
unlock method: read codes
Model: Huawei-G3610
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6223:8A05:8A00]...
CPU: MT6223
high speed boot On
chip: 0011:4D83:000C
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6223,E05
Date: 2000.00.00
Version: 1.0
Version: G3610_V100R001B001C19SP03S
Version: L75_HW
80 byte(s) read
imei: 35398504423574
connection Ok
185 byte(s) read
38 byte(s) read
Phone lock: Off
Phone code: 1234
173 byte(s) read
reading data...
972 byte(s) read
lock[1] code: + 57399184
lock[2] code: + default
lock[3] code: + 1122
lock[4] code: - default
lock[5] code: - default
lock[6] code: + default
lock[7] code: + default
if phone do not ask for a code try: *983*8284#
if code is not accepted by phone:
- make full flash backup for emergency case
- flash phone with good eeprom file
- Power-On phone without sim-card
- Power-Off phone (do not remove battery)
- read unlock codes
- restore original imei
Finished, time used: 11 sec
Remove/Install battery now !


plz add g1000 in next update

goodddddddddddddddddddddddddddddddddddd