Ufone New Model Huawei G3610 Info inside ! - GSM-Forum

Faheem Anjum · 02-21-2011, 12:40

Ufone Company released a new model of Huawei

i check with infinity box and found the model but not able to unlock it , set ask for NP code i try with all mode but not success

here is the logo

Code:

Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6223:8A05:8A00]...
CPU: MT6223
chip: 0011:7EF6:000C
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6223,E05
Date: 2000.00.00
Version: 1.0
Version: G3610_V100R001B001C19SP03S
Version: L75_HW
80 byte(s) read
imei: 35398504418625
connection Ok
185 byte(s) read
reading data...
reading data #2...
building new data...
writing data...
173 byte(s) read
reading data...
972 byte(s) read
building new data...
writing data...
verifying...
verification Ok
done
Finished, time used: 12 sec
Remove/Install battery now !

Here is full flash & eeprom backup :Huawei-G3610_G3610PAK_PCB01_GPRS_MT6223P_S00.G3610_V100R0 01B001C19SP03S__ffs_20110221-160628.B0E.zip - 4shared.com - online file sharing and storage - download
Huawei-G3610_G3610PAK_PCB01_GPRS_MT6223P_S00.G3610_V100R0 01B001C19SP03S__fullflash_part_1_of_1_20110221-155447.B0M.zip - 4shared.com - online file sharing and storage - download

Hope infinity team will check this model For pakistani user,s

zeedan · 02-21-2011, 12:48

yes good information any body expert help for this problem

delux_gsm · 02-21-2011, 12:50

thanks brother
plz infity team solve this problem
i have already 30 sets
we are waiting

Faheem Anjum · 02-21-2011, 13:27

To All G3610 Unlock Done !

download from support :InfinityUpdate_MModule_v3.75

install and select the model from list and use read code mode and read the code check the pic

how to enter unlock code , without sim card enter

*983*8284# and enter the code show on pic .

some phones ask for NP code So simple enter a unaccepted sim into phone and enter the NP code

alis · 02-21-2011, 13:30

thanks brother
plz infity team solve this problem

jahednn · 02-21-2011, 13:31

thanks brother ......................................

ashraf_bcs · 02-21-2011, 13:31

Quote:

Originally Posted by Faheem Anjum

To All G3610 Unlock Done !

download from support :InfinityUpdate_MModule_v3.75

install and select the model from list and use read code mode and read the code check the pic

how to enter unlock code , without sim card enter

*983*8284# and enter the code show on pic .

some phones ask for NP code So simple enter a unaccepted sim into phone and enter the NP code

Thanks.Nice information.Do u share the pin out.

parmodparmod · 02-21-2011, 13:32

Good information brother

Faheem Anjum · 02-21-2011, 13:37

Quote:

Originally Posted by ashraf_bcs

Thanks.Nice information.Do u share the pin out.

10pin connector

/12345\
|678910|

GND:02
VCC:04
Rx: 09
Tx: 07

rafi_5217705 · 02-21-2011, 15:36

http://forum.gsmhosting.com/vbb/f296...ml#post6984676

YellowBoss · 02-22-2011, 01:17

Quote:

Originally Posted by alis

thanks brother
plz infity team solve this problem

As you can see there is no any problems !

Infinity-Box can unlock this phone well, so I think it's no need to change anything for now. You need just read an instruction and follow it.

YellowBoss · 02-22-2011, 01:23

Quote:

Originally Posted by Faheem Anjum

10pin connector

/12345\
|678910|

GND:02
VCC:04
Rx: 09
Tx: 07

Pinout also available in Infinity-Box Shell, see pinout for G3501 model.

iqbal_gsm · 02-22-2011, 10:44

Quote:

COM56 [VCP0] selected
module v3.75
Action: read unlock codes
unlock method: read codes
Model: Aiko-17G
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6223:8A05:8A00]...
CPU: MT6223
chip: 0011:6257:000C
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6223,E05
Date: 2000.00.00
Version: 1.0
Version: G3610_V100R001B001C19SP03S
Version: L75_HW
72 byte(s) read
imei: D445B413000000
connection Ok
77 byte(s) read
reading data #2...
reading data #3...
reading data #4...
reading data #5...
32 byte(s) read
error: source data size is less than expected
detecting structure #3...
error: can't read additional data
reading data...
34 byte(s) read
warning: unknown lock version: 30305230
if code is not accepted by phone:
- make full flash backup for emergency case
- flash phone with good eeprom file
- Power-On phone without sim-card
- Power-Off phone
- read unlock codes
- restore original imei
error: operation failed !
Finished, time used: 28 sec
Remove/Install battery now !

plz help me .................

YellowBoss · 02-22-2011, 11:17

Quote:

Originally Posted by iqbal_gsm

plz help me .................

You must select correct model name in software !
You have selected Aiko, but you must select Huawei !!!

mobile_doc · 02-22-2011, 21:11

COM3 [Serial2] selected
module v3.75
Action: read unlock codes
unlock method: read codes
Model: Huawei-G3610
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6223:8A05:8A00]...
CPU: MT6223
chip: 0011:5D21:000C
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6223,E05
Date: 2000.00.00
Version: 1.0
Version: G3610_V100R001B001C204SP03S
Version: L75_HW
80 byte(s) read
imei: 35398504419168
connection Ok
185 byte(s) read
38 byte(s) read
Phone lock: Off
Phone code: 1234
173 byte(s) read
reading data...
972 byte(s) read
lock[1] code: + 12345678
lock[2] code: + 56781234
lock[3] code: + 1122
lock[4] code: - 3344
lock[5] code: - 5566
lock[6] code: + 7788
lock[7] code: + 9900
if code is not accepted by phone:
- make full flash backup for emergency case
- flash phone with good eeprom file
- Power-On phone without sim-card
- Power-Off phone
- read unlock codes
- restore original imei
Finished, time used: 13 sec
Remove/Install battery now !

Just Write
lock[1] code: + 12345678

In Np Code and its finished ..
i have done 5 sets today

Thanks Infinity For this Great Jobs....

02-21-2011, 12:40	#1 (permalink)
Faheem Anjum No Life Poster Join Date: Nov 2006 Location: (United States Of Islam) Age: 37 Posts: 24,984 Member: 399832 Status: Offline Sonork: Faheem Anjum Thanks Meter: 24,310	Ufone New Model Huawei G3610 Info inside ! Ufone Company released a new model of Huawei i check with infinity box and found the model but not able to unlock it , set ask for NP code i try with all mode but not success here is the logo Code: Phone should be Switched OFF ! Press and HOLD Power button now ! 19200 autodetect Initializing [6223:8A05:8A00]... CPU: MT6223 chip: 0011:7EF6:000C status: FF Connecting at 19200, wait... Release Power button now ! Phone detected, wait... Hardware: MT6223,E05 Date: 2000.00.00 Version: 1.0 Version: G3610_V100R001B001C19SP03S Version: L75_HW 80 byte(s) read imei: 35398504418625 connection Ok 185 byte(s) read reading data... reading data #2... building new data... writing data... 173 byte(s) read reading data... 972 byte(s) read building new data... writing data... verifying... verification Ok done Finished, time used: 12 sec Remove/Install battery now ! Here is full flash & eeprom backup :Huawei-G3610_G3610PAK_PCB01_GPRS_MT6223P_S00.G3610_V100R0 01B001C19SP03S__ffs_20110221-160628.B0E.zip - 4shared.com - online file sharing and storage - download Huawei-G3610_G3610PAK_PCB01_GPRS_MT6223P_S00.G3610_V100R0 01B001C19SP03S__fullflash_part_1_of_1_20110221-155447.B0M.zip - 4shared.com - online file sharing and storage - download Hope infinity team will check this model For pakistani user,s

02-22-2011, 21:11	#15 (permalink)
mobile_doc Freak Poster Join Date: Dec 2007 Posts: 177 Member: 642536 Status: Offline Thanks Meter: 22	Successfully Unlocked G-3610 COM3 [Serial2] selected module v3.75 Action: read unlock codes unlock method: read codes Model: Huawei-G3610 Checking data, wait... Phone should be Switched OFF ! Press and HOLD Power button now ! 19200 autodetect Initializing [6223:8A05:8A00]... CPU: MT6223 chip: 0011:5D21:000C status: FF Connecting at 19200, wait... Release Power button now ! Phone detected, wait... Hardware: MT6223,E05 Date: 2000.00.00 Version: 1.0 Version: G3610_V100R001B001C204SP03S Version: L75_HW 80 byte(s) read imei: 35398504419168 connection Ok 185 byte(s) read 38 byte(s) read Phone lock: Off Phone code: 1234 173 byte(s) read reading data... 972 byte(s) read lock[1] code: + 12345678 lock[2] code: + 56781234 lock[3] code: + 1122 lock[4] code: - 3344 lock[5] code: - 5566 lock[6] code: + 7788 lock[7] code: + 9900 if code is not accepted by phone: - make full flash backup for emergency case - flash phone with good eeprom file - Power-On phone without sim-card - Power-Off phone - read unlock codes - restore original imei Finished, time used: 13 sec Remove/Install battery now ! Just Write lock[1] code: + 12345678 In Np Code and its finished .. i have done 5 sets today Thanks Infinity For this Great Jobs....

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Seeking for flash nokia 5110 old version (3 version) can exchange for new	Tomas	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	10-14-2017 19:29
New Nokia Software!!!!!!!	Jefferson	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	52	12-30-2016 08:17
How to upload a new firmware...	Brand	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	06-08-2012 18:29
Need info for unliocking 2 lock (with pic microprocesors)	Tomas	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	06-26-1999 01:00

02-21-2011, 12:48	#2 (permalink)
zeedan No Life Poster Join Date: Apr 2009 Posts: 1,434 Member: 1015645 Status: Offline Thanks Meter: 114	yes good information any body expert help for this problem

02-21-2011, 12:50	#3 (permalink)
delux_gsm No Life Poster Join Date: May 2008 Location: Dubai(U.A.E) Age: 37 Posts: 2,687 Member: 765909 Status: Offline Sonork: 100.1608098 Thanks Meter: 855	thanks brother plz infity team solve this problem i have already 30 sets we are waiting

02-21-2011, 13:27	#4 (permalink)
Faheem Anjum No Life Poster Join Date: Nov 2006 Location: (United States Of Islam) Age: 37 Posts: 24,984 Member: 399832 Status: Offline Sonork: Faheem Anjum Thanks Meter: 24,310	To All G3610 Unlock Done ! download from support :InfinityUpdate_MModule_v3.75 install and select the model from list and use read code mode and read the code check the pic how to enter unlock code , without sim card enter 9838284# and enter the code show on pic . some phones ask for NP code So simple enter a unaccepted sim into phone and enter the NP code

02-21-2011, 13:30	#5 (permalink)
alis No Life Poster Join Date: Dec 2005 Location: Al-Madina Communication Age: 45 Posts: 1,507 Member: 206532 Status: Offline Sonork: 100.1622270 Thanks Meter: 874	thanks brother plz infity team solve this problem

02-21-2011, 13:31	#6 (permalink)
jahednn Freak Poster Join Date: Jun 2008 Location: COX'S BAZAR,B A N G L A DESH Age: 37 Posts: 472 Member: 790856 Status: Offline Thanks Meter: 532	thanks brother ......................................

02-21-2011, 13:32	#8 (permalink)
parmodparmod No Life Poster Join Date: Oct 2009 Location: india Posts: 1,267 Member: 1140831 Status: Offline Sonork: no Thanks Meter: 232	Good information brother

02-21-2011, 15:36	#10 (permalink)
rafi_5217705 No Life Poster Join Date: Nov 2007 Location: ☆I-LOVE Pakistan☆ Posts: 1,567 Member: 627475 Status: Offline Sonork: 100.1594828 Thanks Meter: 1,144	http://forum.gsmhosting.com/vbb/f296...ml#post6984676