Can't Format or read code V3.26 - GSM-Forum

vanhh · 01-14-2011, 13:14

Model F99, CPU 6235

Code:

COM4 [Serial2] selected
module  v3.26
Device: Autodetect 6228-6253 NAND
Checking data, wait...
Action: reset settings ("format ffs") NAND
interface: BROM_DLL_v3.1016.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6235:8A04:8A01
status: FF
bbchip bl ver: FE
NOR flash chip: not installed
NAND flash id[0017]: 00AD:007600AD0076 [HYNIX] HY27XS08121M
chip size: 64Mb
page/spare size: 0200/0010
pages per block: 0020
bits i/o: 08
address cycles: 04
internal RAM size: 00010000
external RAM: S_DA_RAM_ERROR
done
Set baudrate (921600)...
done
ram test...
testing...
ram test passed
===>  detect existing firmware structure...
detect ffs...
ffs offset/size: 02000000/02000000
firmware size: 32Mb
ffs size: 32Mb
detect sec ro...
detect custom parameters...
detect project-id...
project-id: G3503_2_HWF_V3.0.5
detect NAND info...
number of areas/bytes to read: 1:00034000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
nfi area detection...
bootloader version: PROWAVE35_08B_BOOTLOADER_V005_MT6235B_G3503_2_HWF_V3_0_5.bin
nfi area detection (3 cores) finished: Ok
TCL-ID detection...
TCL-ID detection done
startup code area #1 detection...
startup code area #1 detection done
rom info ver: 07
sw version: PROWAVE35_08B_PCB01_GPRS_MT6235B_S01.G3503_2_HWF_V3_0_5.BIN
project-id: G3503_2_HWF_V3.0.5, 00000000
code offset: 00000000
ffs offset/size [01]: 02000000/02000000
rom info structure: [standard] type (07)
TCL-ID is absent
===>  done
====================
New firmware found (v.3.26, database date: 13.01.2011): 
PROWAVE35_08B_PCB01_GPRS_MT6235B_S01.G3503_2_HWF_V3_0_5.BIN

This firmware is missing in support area. If this phone is good and working:

- download latest software from support area and try again, probably this firmware already supported in latest software
- make "Read full flash" operation
- send flash backup files to support: [email protected] or upload files to http://rapidshare.com or http://4shared.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
warning: can not format: HW_STORAGE_NOR is not present
Format...
error: can not format: 0BFA:S_DA_HANDSET_FAT_INFO_NOT_FOUND
Format...
error: can not format: 0BFA:S_DA_HANDSET_FAT_INFO_NOT_FOUND
error: last error: 0BFA:S_DA_HANDSET_FAT_INFO_NOT_FOUND
Disconnect...
done
Finished, time used: 37 sec
Remove/Install battery now !

InfinityHelp · 01-14-2011, 20:09

hello!

is this working phone?

vanhh · 01-15-2011, 05:46

Phone working but user lock.

vanhh · 01-16-2011, 03:49

Quote:

Originally Posted by InfinityHelp

hello!

is this working phone?

This is Full flash file backup, can U help me unlock user code?
Full flash file

**InfinitySupport** · 01-18-2011, 21:13

Please, do not make "format" in "complete" mode, just make "read user code" or other unlock operation.
Also if nothing helps you can try to make format in "safe" mode.

vanhh · 01-19-2011, 04:26

in User Code and safe Format i'm alway get error. But now phone unlock after Complete Format 3 times.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help: Forgot my 6110 user lock code!!	GByte9	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	4	02-26-2016 14:52
PIN1/PIN2 CODE	Jon	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	12-26-2012 04:40
Eeprom reading	KLImax	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	09-22-2011 15:55
ORIGINAL SOFTWARE FOR SALE OR TRADE !!!!!!!!!!!!!!!!!	andrew bennett	Main Sales Section	1	07-27-1999 21:31

01-14-2011, 20:09	#2 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! is this working phone?

01-15-2011, 05:46	#3 (permalink)
vanhh No Life Poster Join Date: Jul 2004 Posts: 504 Member: 71603 Status: Offline Thanks Meter: 31	Phone working but user lock.

01-18-2011, 21:13	#5 (permalink)
InfinitySupport Product Manager Join Date: Mar 2005 Location: infinity-box Posts: 38,635 Member: 130995 Status: Offline Thanks Meter: 35,227	Please, do not make "format" in "complete" mode, just make "read user code" or other unlock operation. Also if nothing helps you can try to make format in "safe" mode.

01-19-2011, 04:26	#6 (permalink)
vanhh No Life Poster Join Date: Jul 2004 Posts: 504 Member: 71603 Status: Offline Thanks Meter: 31	in User Code and safe Format i'm alway get error. But now phone unlock after Complete Format 3 times.