v.138 need fix cuted track phones - GSM-Forum

monedadeoro · 01-29-2007, 10:30

with lates versions hav problem conecting with blank(cuted track) phones
this log appear in 90 % of cases

COM2 selected
"repair mode" active
"smart write" active
"soft restore" active
Action: flash
Write: Firmware
Write: Flex
Write: Language Pack
Skip: Eeprom
Device: C113(a),C114,C115,C116,C117,C118
Checking data, wait...
Connect...
Press and HOLD Power button...
Err: initial synchronization failed
Finished, time used: 7 sec
Remove/Install battery now !

please fix this thanks ,other user please report ,if have same problem, i used 5 diferent cables

ismael_mj23 · 03-06-2007, 21:53

I'm having the same problem.

Why Initial sync is failing?

ismael_mj23 · 03-06-2007, 22:04

I used computer com port using rs232 cable instead of unibox and no error given, right now flashing.

InfinityHelp · 03-07-2007, 09:06

Hello!
Changing letency value in Device manager > Com port advanced settings to value "4" might help for work with unibox. Or use com port RS232 cable

ismael_mj23 · 03-15-2007, 20:16

Latency value change does not work. Same error given.

**InfinitySupport** · 03-15-2007, 20:25

Quote:

Originally Posted by ismael_mj23

Latency value change does not work. Same error given.

Please, see more info here:
http://forum.gsmhosting.com/vbb/show...63&postcount=2

01-29-2007, 10:30	#1 (permalink)
monedadeoro Freak Poster Join Date: Mar 2004 Location: PiraLAnD Age: 43 Posts: 344 Member: 60640 Status: Offline Thanks Meter: 20	v.138 need fix cuted track phones with lates versions hav problem conecting with blank(cuted track) phones this log appear in 90 % of cases COM2 selected "repair mode" active "smart write" active "soft restore" active Action: flash Write: Firmware Write: Flex Write: Language Pack Skip: Eeprom Device: C113(a),C114,C115,C116,C117,C118 Checking data, wait... Connect... Press and HOLD Power button... Err: initial synchronization failed Finished, time used: 7 sec Remove/Install battery now ! please fix this thanks ,other user please report ,if have same problem, i used 5 diferent cables

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
which flash file need fix this chinese phone?	.::Indian::.	Infinity-Box	9	08-12-2008 07:50
Need GDFS readout from Z600, trying to fix a dead phone	MG77	Cruiser Suite	4	01-10-2005 22:18
Freia + dead C55 with cuted track = boot file not accepted ?	-=ELF=-	E-Gold Based Phones	9	04-18-2004 14:57
All information and software needed to fix a dead phone...	tEnFo0tPoLe	x1x to x45/x50	8	06-22-2003 18:37

03-06-2007, 21:53	#2 (permalink)
ismael_mj23 Freak Poster Join Date: Jun 2002 Age: 48 Posts: 174 Member: 13329 Status: Offline Thanks Meter: 15	I'm having the same problem. Why Initial sync is failing?

03-06-2007, 22:04	#3 (permalink)
ismael_mj23 Freak Poster Join Date: Jun 2002 Age: 48 Posts: 174 Member: 13329 Status: Offline Thanks Meter: 15	I used computer com port using rs232 cable instead of unibox and no error given, right now flashing.

03-07-2007, 09:06	#4 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	Hello! Changing letency value in Device manager > Com port advanced settings to value "4" might help for work with unibox. Or use com port RS232 cable

03-15-2007, 20:16	#5 (permalink)
ismael_mj23 Freak Poster Join Date: Jun 2002 Age: 48 Posts: 174 Member: 13329 Status: Offline Thanks Meter: 15	Latency value change does not work. Same error given.