Very easy and simple way to unlock Huawei T156 - GSM-Forum

amn32 · 05-07-2011, 15:17

Here is very easy and simple way to unlock Huawei T156 .Download panao1 version 1.72 ,Instaal it and use methiod #2 to unlock phone just in 10 seconds. Thanks to my search and to infinity .

amn32 · 05-08-2011, 05:15

Here is log.

=> module version: v.
=> operation (3) started: COM3
==> get_dll_version
dll version: 38.0i
==> set_com_port
==> set_baud_rate
==> set_v24_mode
==> set_baud_rate
==> check_comm_link
==> get_ms_id
imei: 35308103xxxxxxx
==> get_sw_version
sw ver: P1.2PU01V01.01
==> get_sec_version
sec ver: 00.31Et(4242)
==> get_eep_version
eep version: 000C
==> get_eep_revision
eep revision: 0000
==> reading...
access result: 00
access level: 03
==> set required mode...
==> reboot...
==> reading...
lock result: 00
lock status: 020A
==> unlock...
verification result: F06001005612010000010105020503050405020000000000
verification result: F0600100561200FF00010105020503050405000000000000
verification result: F0600100561200FF00010105020503050405000000000000
verification result: F0600100561200FF00010105020503050405000000000000
verification result: F0600100561200FF00010105020503050405000000000000
==> restore original mode...
last error: No errors
=> operation finished
==> close_com_port
Finished, time used: 20 sec
Power Off/On phone now !

shamshad quresh · 05-08-2011, 05:21

this is not infinity log brother u use other tool for unlock.

amn32 · 05-08-2011, 05:21

An other log.

=> module version: v.
=> operation (3) started: COM3
==> get_dll_version
dll version: 38.0i
==> set_com_port
==> set_baud_rate
==> set_v24_mode
==> set_baud_rate
==> check_comm_link
==> get_ms_id
imei: 3530810333xxx14
==> get_sw_version
sw ver: P1.2PU01V01.01
==> get_sec_version
sec ver: 00.31Et(4242)
==> get_eep_version
eep version: 000C
==> get_eep_revision
eep revision: 0000
==> reading...
access result: 00
access level: 03
==> set required mode...
==> reboot...
==> reading...
lock result: 00
lock status: 020A
==> unlock...
verification result: F0600100561200FF00040105020503050405000000000000
verification result: F0600100561200FF00040105020503050405000000000000
verification result: F0600100561200FF00040105020503050405000000000000
verification result: F0600100561200FF00040105020503050405000000000000
verification result: F0600100561200FF00040105020503050405000000000000
==> restore original mode...
last error: No errors
=> operation finished
==> close_com_port
Finished, time used: 18 sec
Power Off/On phone now !

.::M Irfan::. · 05-08-2011, 05:41

YEA but some t156 with new security will remain same locked even after unlock with infinity.

br

smarty3399 · 05-08-2011, 05:48

Quote:

Originally Posted by sadam.khan

YEA but some t156 with new security will remain same locked even after unlock with infinity.

br

yesss Mate i agree with you!some models are still locked after successfully unlocked

amn32 · 05-08-2011, 05:58

Quote:

Originally Posted by sadam.khan

YEA but some t156 with new security will remain same locked even after unlock with infinity.

br

Yes bro. I,m wonder Why infinity team not work on these problems.
I cant under stand why Infinity is ignoring these problems.?

ABDULMANAN · 05-08-2011, 06:35

Quote:

Originally Posted by amn32

Here is very easy and simple way to unlock Huawei T156 .Download panao1 version 1.72 ,Instaal it and use methiod #2 to unlock phone just in 10 seconds. Thanks to my search and to infinity .

only old seurty supported not new and use 1.78

ABDULMANAN · 05-08-2011, 06:37

Quote:

Originally Posted by shamshad quresh

this is not infinity log brother u use other tool for unlock.

these r infinity logs t156 test sp unlock

amn32 · 05-08-2011, 07:11

Quote:

Originally Posted by ABDULMANAN

only old seurty supported not new and use 1.78

In new ver. module 1.78 ,
Old and new security ( both ) are not supported .

GFTELECOM · 05-08-2011, 11:36

yes bro since long time infinity promise us this update and has i can see it possible we never have this....

cel_phon · 05-08-2011, 11:41

Quote:

Originally Posted by amn32

Here is log.

=> module version: v.
=> operation (3) started: COM3
==> get_dll_version
dll version: 38.0i
==> set_com_port
==> set_baud_rate
==> set_v24_mode
==> set_baud_rate
==> check_comm_link
==> get_ms_id
imei: 35308103xxxxxxx
==> get_sw_version
sw ver: P1.2PU01V01.01
==> get_sec_version
sec ver: 00.31Et(4242)
==> get_eep_version
eep version: 000C
==> get_eep_revision
eep revision: 0000
==> reading...
access result: 00
access level: 03
==> set required mode...
==> reboot...
==> reading...
lock result: 00
lock status: 020A
==> unlock...
verification result: F06001005612010000010105020503050405020000000000
verification result: F0600100561200FF00010105020503050405000000000000
verification result: F0600100561200FF00010105020503050405000000000000
verification result: F0600100561200FF00010105020503050405000000000000
verification result: F0600100561200FF00010105020503050405000000000000
==> restore original mode...
last error: No errors
=> operation finished
==> close_com_port
Finished, time used: 20 sec
Power Off/On phone now !

ur set is still locked

amn32 · 05-08-2011, 12:20

Quote:

Originally Posted by cel_phon

ur set is still locked

Yes .Very good bro. u r so smart it was of new security type phone and i could not unlock it .Your observation is very good.No one other could Jugde it.But look my second log it shows unlocked .

ABDULMANAN · 05-09-2011, 11:29

Quote:

Originally Posted by amn32

In new ver. module 1.78 ,
Old and new security ( both ) are not supported .

for old use standard buttion sp unlock work perfect and for new use t156 test unlock but it not working good

05-07-2011, 15:17	#1 (permalink)
amn32 No Life Poster Join Date: Aug 2007 Location: Under Blue Posts: 5,080 Member: 569925 Status: Offline Sonork: 100.1624057 Thanks Meter: 6,313	Very easy and simple way to unlock Huawei T156 Here is very easy and simple way to unlock Huawei T156 .Download panao1 version 1.72 ,Instaal it and use methiod #2 to unlock phone just in 10 seconds. Thanks to my search and to infinity .

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
news headlines to gsm phone	mos	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	7	05-22-2016 11:42
How to add a language in 51xx/61xx	tati	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	05-21-2013 19:20
How to upload a new firmware...	Brand	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	06-08-2012 18:29
IR between 6150 and IBM TP 600	favdijck	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	3	11-15-2011 13:08
Copy from one 6110 to another	Leif Nielsen	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	06-10-1999 22:36

05-08-2011, 05:15	#2 (permalink)
amn32 No Life Poster Join Date: Aug 2007 Location: Under Blue Posts: 5,080 Member: 569925 Status: Offline Sonork: 100.1624057 Thanks Meter: 6,313	Here is log. => module version: v. => operation (3) started: COM3 ==> get_dll_version dll version: 38.0i ==> set_com_port ==> set_baud_rate ==> set_v24_mode ==> set_baud_rate ==> check_comm_link ==> get_ms_id imei: 35308103xxxxxxx ==> get_sw_version sw ver: P1.2PU01V01.01 ==> get_sec_version sec ver: 00.31Et(4242) ==> get_eep_version eep version: 000C ==> get_eep_revision eep revision: 0000 ==> reading... access result: 00 access level: 03 ==> set required mode... ==> reboot... ==> reading... lock result: 00 lock status: 020A ==> unlock... verification result: F06001005612010000010105020503050405020000000000 verification result: F0600100561200FF00010105020503050405000000000000 verification result: F0600100561200FF00010105020503050405000000000000 verification result: F0600100561200FF00010105020503050405000000000000 verification result: F0600100561200FF00010105020503050405000000000000 ==> restore original mode... last error: No errors => operation finished ==> close_com_port Finished, time used: 20 sec Power Off/On phone now !

05-08-2011, 05:21	#3 (permalink)
shamshad quresh No Life Poster Join Date: Nov 2008 Location: pakistan Posts: 1,944 Member: 898041 Status: Offline Sonork: 100.1593459 Thanks Meter: 549	this is not infinity log brother u use other tool for unlock.

05-08-2011, 05:21	#4 (permalink)
amn32 No Life Poster Join Date: Aug 2007 Location: Under Blue Posts: 5,080 Member: 569925 Status: Offline Sonork: 100.1624057 Thanks Meter: 6,313	An other log. => module version: v. => operation (3) started: COM3 ==> get_dll_version dll version: 38.0i ==> set_com_port ==> set_baud_rate ==> set_v24_mode ==> set_baud_rate ==> check_comm_link ==> get_ms_id imei: 3530810333xxx14 ==> get_sw_version sw ver: P1.2PU01V01.01 ==> get_sec_version sec ver: 00.31Et(4242) ==> get_eep_version eep version: 000C ==> get_eep_revision eep revision: 0000 ==> reading... access result: 00 access level: 03 ==> set required mode... ==> reboot... ==> reading... lock result: 00 lock status: 020A ==> unlock... verification result: F0600100561200FF00040105020503050405000000000000 verification result: F0600100561200FF00040105020503050405000000000000 verification result: F0600100561200FF00040105020503050405000000000000 verification result: F0600100561200FF00040105020503050405000000000000 verification result: F0600100561200FF00040105020503050405000000000000 ==> restore original mode... last error: No errors => operation finished ==> close_com_port Finished, time used: 18 sec Power Off/On phone now !

05-08-2011, 05:41	#5 (permalink)
.::M Irfan::. No Life Poster Join Date: Apr 2006 Location: Al-Ahsa Saudi Arabia Age: 35 Posts: 5,046 Member: 253510 Status: Offline Sonork: 100.1672352 Thanks Meter: 3,534	YEA but some t156 with new security will remain same locked even after unlock with infinity. br

05-08-2011, 11:36	#11 (permalink)
GFTELECOM No Life Poster Join Date: Dec 2008 Location: some were in my head Age: 42 Posts: 1,036 Member: 922273 Status: Offline Sonork: 100.1583612 Thanks Meter: 119	yes bro since long time infinity promise us this update and has i can see it possible we never have this....