Vivo V5 dead after flashed..

[ravi mobile]

Vivo V5 comes with pin lock, its dead after format by cm2mt, i do not have formatted logs,
i flashed mobile couple of firmware but mobile still dead, here is success flashed log-

Operation : Write Flash [ v2.00 r4 ]

Repartition : Enabled
Flash Verify : Disabled
Pre-Erase : Enabled
Verify HW/SW : Enabled
XData Backup : Disabled

Files :20
[FL] : Set : preloader_bbk6750_66_m.bin
[FL] : Set : preloader_bbk6750_66_m.bin
[FL] : Set : recovery-verified.img
[FL] : Set : survival-verified.img
[FL] : Set : oem.img
[FL] : Set : apps.img
[FL] : Set : md1rom-verified.img
[FL] : Set : md1dsp-verified.img
[FL] : Set : md1arm7-verified.img
[FL] : Set : md3rom-verified.img
[FL] : Set : lk-verified.bin
[FL] : Set : lk-verified.bin
[FL] : Set : boot-verified.img
[FL] : Set : logo-verified.bin
[FL] : Set : trustzone-verified.bin
[FL] : Set : trustzone-verified.bin
[FL] : Set : secro.img
[FL] : Set : system.img
[FL] : Set : cache.img
[FL] : Set : userdata.img

[FL] : Total size : 0xEFE244BC [ 3.75 GB ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM58)
MODE : BOOTROM
PORT : 58
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : BOOTROM
MODE : 0_base : BASE_v1812 | Manual : Enabled
BROM : SLA
BROM : SLA Passed!
AGENT : Look for suitable BootChain in DA ...
AGENT : Mohit_Kkc_DA.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : MT6755
EMI : SRC : preloader_bbk6750_66_m.bin
EMI : CNT : 0009
EMI : [00] : eMCP : eMMC+LP/DDR3 , ID : 150100525831424D42 : VEN : SAMSUNG | DEV : RX1BMB : RAM : [ 3.00 GB ]
EMI : [01] : eMCP : eMMC+LP/DDR3 , ID : 90014A484147346132 : VEN : HYNIX | DEV : HAG4a2 : RAM : [ 3.00 GB ]
EMI : [02] : eMCP : eMMC+LP/DDR3 , ID : 150100524531424D42 : VEN : SAMSUNG | DEV : RE1BMB : RAM : [ 3.00 GB ]
EMI : [03] : eMCP : eMMC+LP/DDR3 , ID : 90014A484247346132 : VEN : HYNIX | DEV : HBG4a2 : RAM : [ 4.00 GB ]
EMI : [04] : eMCP : eMMC+LP/DDR3 , ID : 150100525831344D42 : VEN : SAMSUNG | DEV : RX14MB : RAM : [ 4.00 GB ]
EMI : [05] : eMCP : eMMC+LP/DDR3 , ID : 150100524331344D42 : VEN : SAMSUNG | DEV : RC14MB : RAM : [ 4.00 GB ]
EMI : [06] : eMCP : eMMC+LP/DDR3 , ID : 150100525836344D42 : VEN : SAMSUNG | DEV : RX64MB : RAM : [ 4.00 GB ]
EMI : [07] : eMCP : eMMC+LP/DDR3 , ID : 150100524836344D42 : VEN : SAMSUNG | DEV : RH64MB : RAM : [ 4.00 GB ]
EMI : [08] : eMCP : eMMC+LP/DDR3 , ID : 150100524836344142 : VEN : SAMSUNG | DEV : RH64AB : RAM : [ 4.00 GB ]
EMI : Init EMI from PRELOADER
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00040000 [ 256.00 KB ]
DRAM: 0xC0000000 [ 3.00 GB ]

EMMC: 150100524836344D4205C432D8E824EB
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : RH64MB
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0xE8F800000 [ 58.24 GB ]

CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 574CDA74CB82285854B68627D40CD97A

DA : USB : FULL-SPEED

Boot done!


[FL] : HW verification passed!

[FL] : RePartition
[FL] : RePartition Ok!

[FL] : Flashing now ...

Write : PRELOADER
Write : PRELOADER_BACKUP
Write : RECOVERY
Write : SURVIVAL
Write : CUST
Write : APPS
Write : MD1IMG
Write : MD1DSP
Write : MD1ARM7
Write : MD3IMG
Write : LK
Write : LK2
Write : BOOT
Write : LOGO
Write : TEE1
Write : TEE2
Write : SECRO
Write : SYSTEM
Write : CACHE
Write : USERDATA

[FL] : Flashing finished!


Done!
Elapsed: 00:03:39

Reconnect Power/Cable!

flashed firmware are these -
1 Vivo_V5_D1612F_MT6750_EX_A_2.7.25_ALPS.M0.MP7.V2.1 0
2PD1612F_EX_A_2.9.1_vivo_mtk_ALPS.M0.MP7.V2.10_mt6 750_Prem_India.tar
3 PD1612F_EX_A_3.6.8_vivo_mtk_ALPS.M0.MP7.V2.10_mt67 50 BY Gsm Developers
4 PD1612F_EX_A_3.9.2_vivo_mtk_ALPS.M0.MP7.V2.10_mt67 50

mobile still dead, i need help for alive this mobile.


Thanks.

[nessyb]

You should not have ticked Preloader and repartition.. Thats why result in dead phone..


Try read bin from working (64gb dump) mobile and write to this dead mobile if failed

Try write working bin and reflash official firmware with preloader and repartition unticked

[ravi mobile]

Originally Posted by nessyb

You should not have ticked Preloader and repartition.. Thats why result in dead phone..


Try read bin from working (64gb dump) mobile and write to this dead mobile if failed

Try write working bin and reflash official firmware with preloader and repartition unticked

Thanks for reply,
now mobile showing only logo. seemed boot loop problem here.
any way to short out this ?

[PASSIONATE_BOYS]

Hello,
Flash latest version- PD1612F_EX_A_3.11.1_vivo_mtk_ALPS.M0.MP7.V2.10_mt6 750.tar

Br.
Infinity Box Team.

[ravi mobile]

Originally Posted by PASSIONATE_BOYS

Hello,
Flash latest version- PD1612F_EX_A_3.11.1_vivo_mtk_ALPS.M0.MP7.V2.10_mt6 750.tar

Br.
Infinity Box Team.

I could not found the link. I searched but not find.
Please give the link for firmware.