GSM-Forum - vivo y15 after flash dead

GSM-Forum (https://forum.gsmhosting.com/vbb/)

- Infinity-Box (https://forum.gsmhosting.com/vbb/f296/)

- - vivo y15 after flash dead (https://forum.gsmhosting.com/vbb/f296/vivo-y15-after-flash-dead-2104379/)

vivo y15 after flash dead

need help jaydi bro
vivo y15 after flash dead
i take backup bfore flashing
i write tahat backup but mobile
still dead
i write this file vivo.Y15.4.4.2.MT6582.spflash.new mobile daed
backup write log

Quote:

======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 16 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1620.10.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4834473164040502A13CDA81E3
Initialize Memory ...
DRAM configured from ScatFW!
DRAM initialize passed!
DRAM size : 0x20000000
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d1G4
[eMMC] : FLASH_CID : 90014A4834473164040502A13CDA81E3
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID : 0x2DD883225E2B46F5DB39EDE3052E54FF
INT RAM : 0x00020000
EXT RAM : 0x20000000 [512 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

ScatCFG : BaseBand : MT6582 , Project : bbk82_cwet_kk , Storage : EMMC
Setting : Flash Pre-Erase : Off ( Write Flash Only )
Setting : AFF verify : Enabled
Setting : HW verify : Enabled

Switching to HSUSB
HSUSB Init Ok
BL : Check HW compatibility
BL : BBID supported by BootLoader!
BL : Check eMMC compatibility
BL : eMMC supported by BootLoader!

BL : BatteryLevel : 3662 mV
BL : BatteryLevel Ok

SecCfg Passed , 1799
BMT remark not need. Will skip
Sending Preloader ...
Use : preloader_bbk82_cwet_kk.bin
Preloader Sent , Init passed
SecCfg Passed , 1799
PartCount : FFFFFFFF
PartErr : Not initialized , will update PMT now ...
Repartition Done!

Processing : Flash Write
Flash now : MBR
Image Flash Ok
Flash now : EBR1
Image Flash Ok
Flash now : UBOOT
Image Flash Ok
Flash now : BOOTIMG
Image Flash Ok
Flash now : RECOVERY
Image Flash Ok
Flash now : SEC_RO
Image Flash Ok
Flash now : LOGO
Image Flash Ok
Flash now : EBR2
Image Flash Ok
Flash now : ANDROID
Image Flash Ok
Flash now : CACHE
Image Flash Ok
Flash now : USRDATA
Image Flash Ok
Flash Write Done, time used : 00:03:20

Processing : Verify
Verify Passed : MBR
Verify Passed : EBR1
Verify Passed : UBOOT
Verify Passed : BOOTIMG
Verify Passed : RECOVERY
Verify Passed : SEC_RO
Verify Passed : LOGO
Verify Passed : EBR2
Verify Passed : ANDROID
Verify Passed : CACHE
Verify Passed : USRDATA
Data Verify Done, time used : 00:00:05

Update Mirror PMT
Update Done!

Update RomInfo done

Done!
Elapsed: 00:03:52
Reconnect Power/Cable!

bfore flashing backup img
https://s31.postimg.org/4g5ufrq9n/vivo_v15.jpg

What was the problem B4 flashing ? The backup taken on which condition ?

Br - srinibas

Quote:

Originally Posted by srinibas (Post 11884353)

What was the problem B4 flashing ? The backup taken on which condition ?

Br - srinibas

mobile problam is virous
and backup is
working condition
b4 flashing

Quote:

Originally Posted by samreen111 (Post 11884303)

try flashing with this firmware
https://drive.google.com/file/d/0B8y...w?pref=2&pli=1

Pass: poho deui

Quote:

Originally Posted by samreen111 (Post 11884366)

mobile problam is virous
and backup is
working condition
b4 flashing

Download this & flash with SP tool .... Post result

Br - srinibas

Quote:

Originally Posted by srinibas (Post 11884410)

Download this & flash with SP tool .... Post result

Br - srinibas

bro your file is OTA file
how i can use with sptool and mobile is dead not going in recovry

Quote:

Originally Posted by samreen111 (Post 11884438)

bro your file is OTA file
how i can use with sptool and mobile is dead not going in recovry

https://drive.google.com/file/d/0B8y...w?pref=2&pli=1
flash with sptool
Pass: poho deui

Quote:

Originally Posted by Deni's (Post 11884515)

https://drive.google.com/file/d/0B8y...w?pref=2&pli=1
flash with sptool
Pass: poho deui

plz can you uplod other sever like
4shard mediafire
bcouse down loding speed very slow

Quote:

Originally Posted by Deni's (Post 11884515)

https://drive.google.com/file/d/0B8y...w?pref=2&pli=1
flash with sptool
Pass: poho deui

not work still daed
https://s31.postimg.org/g2zpxo7ej/v15.jpg

I am also having the same problem with some other huawei phone I don't remember the model now.
Before flashing set stuck on the logo but after flashing the tested file my phone is dead now.

Sent from my iPhone using Tapatalk

bro preloader erased, init preloader from backup

Quote:

Originally Posted by KARUNAMAYBEHERA (Post 11888015)

bro preloader erased, init preloader from backup

already tried but not sucess

plz uplod anyone full dump

same problome with me anyone have solution then plz help

here also same :) gone one now