GSM-Forum

GSM-Forum (https://forum.gsmhosting.com/vbb/)
-   Infinity-Box (https://forum.gsmhosting.com/vbb/f296/)
-   -   World First! Innjoo F1 7" Tablet Read Factory Firmware Done :) (https://forum.gsmhosting.com/vbb/f296/world-first-innjoo-f1-7-tablet-read-factory-firmware-done-2011307/)

syed tuqeer 11-09-2015 14:46

World First! Innjoo F1 7" Tablet Read Factory Firmware Done :)
 
Word First! (Bla Bla...... Etc)
Innjoo F1 7" Tablet
http://bestmobs.com/html/uploads/InnJoo-F1.jpg
Code:

Operation : Check / Read Info [ v1.36 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 8 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 90014A4834473164040502A18D718123
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0090 , OEM : 014A
[eMMC] : FLASH_INF : d1G4
[eMMC] : FLASH_CID : 90014A4834473164040502A18D718123
[eMMC] : FLASH_EXT : 00400000/00400000
[eMMC] : FLASH_LEN : 0x00000000E9000000
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand    : alps
ProdName  : td710
ProdModel : td710
Device    : td710
AndroidVer: 4.2.2
MTKxCPU  : MT6572
MTKxPRJ  : ALPS.JB3.MP.V1

Done!
Elapsed: 00:00:07
Reconnect Power/Cable!


Operation : Read Flash [ v1.36 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 8 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 90014A4834473164040502A18D718123
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0090 , OEM : 014A
[eMMC] : FLASH_INF : d1G4
[eMMC] : FLASH_CID : 90014A4834473164040502A18D718123
[eMMC] : FLASH_EXT : 00400000/00400000
[eMMC] : FLASH_LEN : 0x00000000E9000000
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ...

Brand    : alps
ProdName  : td710
ProdModel : td710
Device    : td710
AndroidVer: 4.2.2
MTKxCPU  : MT6572
MTKxPRJ  : ALPS.JB3.MP.V1

[Read Ok] : preloader_td710.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : custom.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[Read Ok] : fat.img

[ScatCFG] : MT6572 / V1.1.1 / td710 / EMMC
FW Size : 698 MiB
Scatter saved to : C:\InfinityBox\CM2MTK\Flash\MT6572__alps__td710__td710__4.2.2__ALPS.JB3.MP.V1\

All done!

Done!
Elapsed: 00:04:04
Reconnect Power/Cable!


waqas317 12-23-2015 10:12

Quote:

Originally Posted by syed tuqeer (Post 11400002)
Word First! (Bla Bla...... Etc)
Innjoo F1 7" Tablet
http://bestmobs.com/html/uploads/InnJoo-F1.jpg
Code:

Operation : Check / Read Info [ v1.36 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 8 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 90014A4834473164040502A18D718123
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0090 , OEM : 014A
[eMMC] : FLASH_INF : d1G4
[eMMC] : FLASH_CID : 90014A4834473164040502A18D718123
[eMMC] : FLASH_EXT : 00400000/00400000
[eMMC] : FLASH_LEN : 0x00000000E9000000
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand    : alps
ProdName  : td710
ProdModel : td710
Device    : td710
AndroidVer: 4.2.2
MTKxCPU  : MT6572
MTKxPRJ  : ALPS.JB3.MP.V1

Done!
Elapsed: 00:00:07
Reconnect Power/Cable!


Operation : Read Flash [ v1.36 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 8 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 90014A4834473164040502A18D718123
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0090 , OEM : 014A
[eMMC] : FLASH_INF : d1G4
[eMMC] : FLASH_CID : 90014A4834473164040502A18D718123
[eMMC] : FLASH_EXT : 00400000/00400000
[eMMC] : FLASH_LEN : 0x00000000E9000000
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ...

Brand    : alps
ProdName  : td710
ProdModel : td710
Device    : td710
AndroidVer: 4.2.2
MTKxCPU  : MT6572
MTKxPRJ  : ALPS.JB3.MP.V1

[Read Ok] : preloader_td710.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : custom.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[Read Ok] : fat.img

[ScatCFG] : MT6572 / V1.1.1 / td710 / EMMC
FW Size : 698 MiB
Scatter saved to : C:\InfinityBox\CM2MTK\Flash\MT6572__alps__td710__td710__4.2.2__ALPS.JB3.MP.V1\

All done!

Done!
Elapsed: 00:04:04
Reconnect Power/Cable!




need flash file i have a tab still logo

zz22jj 10-22-2016 16:57

Dear Friends i need also this flash file if any body have plz give me link

sky73 10-22-2016 20:51

Before flash get a backup


Here you firmware
Link

zz22jj 10-25-2016 17:07

Dear Bro i need Mt6572 Firmware that link you give it has mt6582

InfinitySupport 10-25-2016 19:28

If you have good flash files and if you want to share it with other users please use IOS File Uploader Tool


All times are GMT +1. The time now is 09:39.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -

Page generated in 0.13650 seconds with 6 queries

SEO by vBSEO