world first zte v811w - GSM-Forum

ORITECH · 11-04-2016, 11:41

read write reset

Infinity-Box Qualcomm Module [QLM] v 1.02

Operation : Identify [ v1.02 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_S : 00EC5471
ID_BLOCK_I : 008150E1
ID_BLOCK_L : 49C762F6FE52E492
ID_BLOCK_L : 9B939302A85331CC
Use CM2 Internal Loader

Error : Prepare target failed! Unsupported CPU???
Send log and report.log to support! Include device info also!

Reconnect Power/Cable!

Operation : Reset Settings [ v1.02 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_S : 00EC5471
ID_BLOCK_I : 008150E1
ID_BLOCK_L : 49C762F6FE52E492
ID_BLOCK_L : 9B939302A85331CC
Use CM2 Internal Loader

Error : Prepare target failed! Unsupported CPU???
Send log and report.log to support! Include device info also!

Reconnect Power/Cable!

Operation : Identify [ v1.02 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...

Device not found!
Check cable, connection and drivers!

Reconnect Power/Cable!

Operation : Identify [ v1.02 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 2x/4x|00 [MSM8x10]
ID_BLOCK_S : 03505532
ID_BLOCK_I : 008110E1
ID_BLOCK_L : 49C762F6FE52E492
ID_BLOCK_L : 9B939302A85331CC
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8x10 , FLASH : eMMC , VER : 1
ExtInfo : 0x0000C000/0000C000/00001000/00001000
Boot Ok!

Brand : ZTE
ProdName : ZTE-V811
ProdModel : ZTE V811W
Device : P821E10
AndroidVer: 4.4.2
Manufact. : ZTE
QLMxCPU : MSM8610

Done!
Elapsed: 00:00:05

Reconnect Power/Cable!

Operation : Read Flash [ v1.02 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 2x/4x|00 [MSM8x10]
ID_BLOCK_S : 03505532
ID_BLOCK_I : 008110E1
ID_BLOCK_L : 49C762F6FE52E492
ID_BLOCK_L : 9B939302A85331CC
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8x10 , FLASH : eMMC , VER : 1
ExtInfo : 0x0000C000/0000C000/00001000/00001000
Boot Ok!

Brand : ZTE
ProdName : ZTE-V811
ProdModel : ZTE V811W
Device : P821E10
AndroidVer: 4.4.2
Manufact. : ZTE
QLMxCPU : MSM8610

DevInfo : MSM8610__ZTE__ZTE__ANDR_v4.4.2__ZTE_V811W__P821E10 __ZTE-V811

Reading Flash Content ...
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : sbl1.mbn
[Read Ok] : deploy.mbn
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : rpm.mbn
[Read Ok] : boot.img
[Read Ok] : tz.mbn
[Read Ok] : system.img
[Read Ok] : userdata.img
[Read Ok] : persist.img
[Read Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : fs_gc.img
[Read Ok] : splash.img
[Read Ok] : gpt_backup0.bin

Android Info saved!
Read finished!
Configuration : MSM8x10 / eMMC
Firmware Size : 798 MiB

Done!
Elapsed: 00:02:31

Reconnect Power/Cable!

Operation : Reset Settings [ v1.02 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 2x/4x|00 [MSM8x10]
ID_BLOCK_S : 03505532
ID_BLOCK_I : 008110E1
ID_BLOCK_L : 49C762F6FE52E492
ID_BLOCK_L : 9B939302A85331CC
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8x10 , FLASH : eMMC , VER : 1
ExtInfo : 0x0000C000/0000C000/00001000/00001000
Boot Ok!

Format USER ...
Format CACHE ...
Format Ok!

Done!
Elapsed: 00:00:32

Reconnect Power/Cable!

Loading firmware ...
Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand : ZTE
Device Manufact.: ZTE
Device Model : P821E10
Device CPU : MSM8610
Device IntName : ZTE-V811
Device Version : 4.4.2
CU_SWVer : ZTE
Device Compile : 5/22/2014 3:46:34 PM
Device ExtInfo : ZTE V811W
Load Ok!

Operation : Flash [ v1.02 ]

Verify FW package ...
Verification passed!

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 2x/4x|00 [MSM8x10]
ID_BLOCK_S : 03505532
ID_BLOCK_I : 008110E1
ID_BLOCK_L : 49C762F6FE52E492
ID_BLOCK_L : 9B939302A85331CC
Pickup loader from firmware package
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8x10 , FLASH : eMMC , VER : 1
ExtInfo : 0x0000C000/0000C000/00001000/00001000
Boot Ok!

Files in Chain : 19
Flashing now

Flashing : gpt_main0.bin
Flashing : NON-HLOS.bin
Flashing : sbl1.mbn
Flashing : deploy.mbn
Flashing : emmc_appsboot.mbn
Flashing : rpm.mbn
Flashing : boot.img
Flashing : tz.mbn
Flashing : system.img
Flashing : userdata.img
Flashing : persist.img
Flashing : cache.img
Flashing : recovery.img
Flashing : splash.img
Flashing : gpt_backup0.bin

Flashing done!

Done!
Elapsed: 00:01:39

Reconnect Power/Cable!

[IMG]

[/IMG]

GsmBaguio · 11-04-2016, 12:38

what is trick

all driver installed

but cant coonect like this http://forum.gsmhosting.com/vbb/f296/zte-frp-2151916/

JayDi · 11-04-2016, 12:54

Quote:

Originally Posted by GsmBaguio

what is trick

all driver installed

but cant coonect like this http://forum.gsmhosting.com/vbb/f296/zte-frp-2151916/

Hello. Answer given in your thread.

JayDi · 11-04-2016, 12:59

@ORITECH, can you share info about phone, which you try connect before that ZTE?

Code:

Operation : Reset Settings [ v1.02 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_S : 00EC5471
ID_BLOCK_I : 008150E1
ID_BLOCK_L : 49C762F6FE52E492
ID_BLOCK_L : 9B939302A85331CC
Use CM2 Internal Loader

Error : Prepare target failed! Unsupported CPU???
Send log and report.log to support! Include device info also!

Reconnect Power/Cable!

.::GEANECIV::. · 01-02-2017, 14:10

Code:

Operation : Flash [ v1.02 ]

Verify FW package ... 
Verification passed!

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
BB_IDC_CPU : SnapDragon 2x/4x|00 [MSM8x10]
ID_BLOCK_S : 03505532
ID_BLOCK_I : 008110E1
ID_BLOCK_L : 49C762F6FE52E492
ID_BLOCK_L : 9B939302A85331CC
Pickup loader from firmware package
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8x10 , FLASH : eMMC , VER : 1
ExtInfo : 0x0000C000/0000C000/00001000/00001000
Boot Ok!

Files in Chain : 19
Flashing now

Flashing : gpt_main0.bin
Flashing : NON-HLOS.bin
Flashing : sbl1.mbn
Flashing : deploy.mbn
Flashing : emmc_appsboot.mbn
Flashing : rpm.mbn
Flashing : boot.img
Flashing : tz.mbn
Flashing : system.img
Flashing : userdata.img
Flashing : persist.img
Flashing : cache.img
Flashing : recovery.img
Flashing : splash.img
Flashing : gpt_backup0.bin

Flashing done!


Done!
Elapsed: 00:01:39

Reconnect Power/Cable!

Hi ORITECH, can u share that readed cm2 firmware? Thanks...

11-04-2016, 11:41	#1 (permalink)
ORITECH Registered User Join Date: Sep 2015 Posts: 213 Member: 2462860 Status: Offline Thanks Meter: 71	world first zte v811w read write reset Infinity-Box Qualcomm Module [QLM] v 1.02 Operation : Identify [ v1.02 ] 1. Power Off Phone , Remove battery , Insert back 2. PRESS and HOLD BOTH VOLUME KEYS! 3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode! Wait for phone... Device Found! Initialize ... Handshake passed! ID_BLOCK_S : 00EC5471 ID_BLOCK_I : 008150E1 ID_BLOCK_L : 49C762F6FE52E492 ID_BLOCK_L : 9B939302A85331CC Use CM2 Internal Loader Error : Prepare target failed! Unsupported CPU??? Send log and report.log to support! Include device info also! Reconnect Power/Cable! Operation : Reset Settings [ v1.02 ] 1. Power Off Phone , Remove battery , Insert back 2. PRESS and HOLD BOTH VOLUME KEYS! 3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode! Wait for phone... Device Found! Initialize ... Handshake passed! ID_BLOCK_S : 00EC5471 ID_BLOCK_I : 008150E1 ID_BLOCK_L : 49C762F6FE52E492 ID_BLOCK_L : 9B939302A85331CC Use CM2 Internal Loader Error : Prepare target failed! Unsupported CPU??? Send log and report.log to support! Include device info also! Reconnect Power/Cable! Operation : Identify [ v1.02 ] 1. Power Off Phone , Remove battery , Insert back 2. PRESS and HOLD BOTH VOLUME KEYS! 3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode! Wait for phone... Device not found! Check cable, connection and drivers! Reconnect Power/Cable! Operation : Identify [ v1.02 ] 1. Power Off Phone , Remove battery , Insert back 2. PRESS and HOLD BOTH VOLUME KEYS! 3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode! Wait for phone... Device Found! Initialize ... Handshake passed! BB_IDC_CPU : SnapDragon 2x/4x\|00 [MSM8x10] ID_BLOCK_S : 03505532 ID_BLOCK_I : 008110E1 ID_BLOCK_L : 49C762F6FE52E492 ID_BLOCK_L : 9B939302A85331CC Use CM2 Internal Loader Loader Sent! Initializing ... Running FireHose on BBID : MSM8x10 , FLASH : eMMC , VER : 1 ExtInfo : 0x0000C000/0000C000/00001000/00001000 Boot Ok! Brand : ZTE ProdName : ZTE-V811 ProdModel : ZTE V811W Device : P821E10 AndroidVer: 4.4.2 Manufact. : ZTE QLMxCPU : MSM8610 Done! Elapsed: 00:00:05 Reconnect Power/Cable! Operation : Read Flash [ v1.02 ] 1. Power Off Phone , Remove battery , Insert back 2. PRESS and HOLD BOTH VOLUME KEYS! 3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode! Wait for phone... Device Found! Initialize ... Handshake passed! BB_IDC_CPU : SnapDragon 2x/4x\|00 [MSM8x10] ID_BLOCK_S : 03505532 ID_BLOCK_I : 008110E1 ID_BLOCK_L : 49C762F6FE52E492 ID_BLOCK_L : 9B939302A85331CC Use CM2 Internal Loader Loader Sent! Initializing ... Running FireHose on BBID : MSM8x10 , FLASH : eMMC , VER : 1 ExtInfo : 0x0000C000/0000C000/00001000/00001000 Boot Ok! Brand : ZTE ProdName : ZTE-V811 ProdModel : ZTE V811W Device : P821E10 AndroidVer: 4.4.2 Manufact. : ZTE QLMxCPU : MSM8610 DevInfo : MSM8610__ZTE__ZTE__ANDR_v4.4.2__ZTE_V811W__P821E10 __ZTE-V811 Reading Flash Content ... [Read Ok] : gpt_main0.bin [Read Ok] : NON-HLOS.bin [Read Ok] : sbl1.mbn [Read Ok] : deploy.mbn [Read Ok] : emmc_appsboot.mbn [Read Ok] : rpm.mbn [Read Ok] : boot.img [Read Ok] : tz.mbn [Read Ok] : system.img [Read Ok] : userdata.img [Read Ok] : persist.img [Read Ok] : cache.img [Read Ok] : recovery.img [Read Ok] : fs_gc.img [Read Ok] : splash.img [Read Ok] : gpt_backup0.bin Android Info saved! Read finished! Configuration : MSM8x10 / eMMC Firmware Size : 798 MiB Done! Elapsed: 00:02:31 Reconnect Power/Cable! Operation : Reset Settings [ v1.02 ] 1. Power Off Phone , Remove battery , Insert back 2. PRESS and HOLD BOTH VOLUME KEYS! 3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode! Wait for phone... Device Found! Initialize ... Handshake passed! BB_IDC_CPU : SnapDragon 2x/4x\|00 [MSM8x10] ID_BLOCK_S : 03505532 ID_BLOCK_I : 008110E1 ID_BLOCK_L : 49C762F6FE52E492 ID_BLOCK_L : 9B939302A85331CC Use CM2 Internal Loader Loader Sent! Initializing ... Running FireHose on BBID : MSM8x10 , FLASH : eMMC , VER : 1 ExtInfo : 0x0000C000/0000C000/00001000/00001000 Boot Ok! Format USER ... Format CACHE ... Format Ok! Done! Elapsed: 00:00:32 Reconnect Power/Cable! Loading firmware ... Created by Infinity-Box (c) Chinese Miracle II (c) 2016 Device Brand : ZTE Device Manufact.: ZTE Device Model : P821E10 Device CPU : MSM8610 Device IntName : ZTE-V811 Device Version : 4.4.2 CU_SWVer : ZTE Device Compile : 5/22/2014 3:46:34 PM Device ExtInfo : ZTE V811W Load Ok! Operation : Flash [ v1.02 ] Verify FW package ... Verification passed! 1. Power Off Phone , Remove battery , Insert back 2. PRESS and HOLD BOTH VOLUME KEYS! 3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode! Wait for phone... Device Found! Initialize ... Handshake passed! BB_IDC_CPU : SnapDragon 2x/4x\|00 [MSM8x10] ID_BLOCK_S : 03505532 ID_BLOCK_I : 008110E1 ID_BLOCK_L : 49C762F6FE52E492 ID_BLOCK_L : 9B939302A85331CC Pickup loader from firmware package Loader Sent! Initializing ... Running FireHose on BBID : MSM8x10 , FLASH : eMMC , VER : 1 ExtInfo : 0x0000C000/0000C000/00001000/00001000 Boot Ok! Files in Chain : 19 Flashing now Flashing : gpt_main0.bin Flashing : NON-HLOS.bin Flashing : sbl1.mbn Flashing : deploy.mbn Flashing : emmc_appsboot.mbn Flashing : rpm.mbn Flashing : boot.img Flashing : tz.mbn Flashing : system.img Flashing : userdata.img Flashing : persist.img Flashing : cache.img Flashing : recovery.img Flashing : splash.img Flashing : gpt_backup0.bin Flashing done! Done! Elapsed: 00:01:39 Reconnect Power/Cable! [IMG][/IMG]

11-04-2016, 12:38	#2 (permalink)
GsmBaguio No Life Poster Join Date: Feb 2010 Location: Pinas Posts: 1,096 Member: 1243303 Status: Offline Sonork: 1591167 Thanks Meter: 514	what is trick all driver installed but cant coonect like this http://forum.gsmhosting.com/vbb/f296/zte-frp-2151916/