GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Infinity-Box
Reload this Page World's First Vivo Y83 MTK6765 Wrtie Factory File done with CM2 MT2
Register FAQDonate Forum Rules Root any Device ★iPhone Unlock★ ★ Direct Codes ★ Direct Unlock Source


Reply
Page 1 of 2 1 2
 
LinkBack Thread Tools Display Modes
Old 10-22-2018, 13:17   #1 (permalink)
Product Supporter
 
kamal_singla's Avatar
 
Join Date: Jun 2014
Location: India
Posts: 5,063
Member: 2211790
Status: Offline
Thanks Meter: 5,118
World's First Vivo Y83 MTK6765 Wrtie Factory File done with CM2 MT2

Code:
Operation : Identify [ v2.00 r4 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM37)
MODE : BOOTROM
PORT : 37
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+SEL
BROM : BOOTROM
MODE : 0_base : BASE_v1712 | Manual : Enabled
BROM : SLA
BROM : SLA Passed!
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : MT6765
     EMI : SRC : preloader_k62v1_64_bsp.bin
     EMI : CNT : 0009
     EMI : [00] : eMCP : eMMC+LP/DDR3 , ID : 150100524436344D42 : VEN : SAMSUNG   | DEV : RD64MB : RAM : [ 4.00 GB ]
     EMI : [01] : eMCP : eMMC+LP/DDR3 , ID : 150100524836344142 : VEN : SAMSUNG   | DEV : RH64AB : RAM : [ 4.00 GB ]
     EMI : [02] : eMCP : eMMC+LP/DDR3 , ID : 150100474436424D42 : VEN : SAMSUNG   | DEV : GD6BMB : RAM : [ 3.00 GB ]
     EMI : [03] : eMCP : eMMC+LP/DDR3 , ID : 90014A484247346132 : VEN : HYNIX     | DEV : HBG4a2 : RAM : [ 4.00 GB ]
     EMI : [04] : eMCP : eMMC+LP/DDR4 , ID : 150100444836444D42 : VEN : SAMSUNG   | DEV : DH6DMB : RAM : [ 4.00 GB ]
     EMI : [05] : eMCP : eMMC+LP/DDR4 , ID : 150100445636444D42 : VEN : SAMSUNG   | DEV : DV6DMB : RAM : [ 4.00 GB ]
     EMI : [06] : eMCP : eMMC+LP/DDR3 , ID : 90014A68423861503E : VEN : HYNIX     | DEV : hB8aP> : RAM : [ 3.00 GB ]
     EMI : [07] : eMCP : eMMC+LP/DDR3 , ID : 90014A484347386134 : VEN : HYNIX     | DEV : HCG8a4 : RAM : [ 4.00 GB ]
     EMI : [08] : eMCP : eMMC+LP/DDR3 , ID : 150100475036424D42 : VEN : SAMSUNG   | DEV : GP6BMB : RAM : [ 3.00 GB ]
     EMI : Init EMI from PRELOADER
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00040000 [ 256.00 KB ]
        DRAM: 0x30000000 [ 768.00 MB ]

        EMMC: 90014A484247346132A566C2DAEE3593
        EMMC: VEN : HYNIX | OEM : 4A01 | DEV : HBG4a2
        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x747C00000 [ 29.12 GB ]

        CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : E78FE27B32F406C7A840472DE201FE5

DA : USB : HIGH-SPEED

Boot done!

Patch Level    : O11019
Display ID     : O11019 release-keys
Ver. CodeName  : REL
Ver. Release   : 8.1.0
Sec. Patch     : 2018-06-05
Build Time     : 1529744454
Product Model  : vivo 1802
Product Brand  : vivo
Product Name   : PD1803BF_EX
Product Device : PD1803BF_EX
Product Manfct : vivo
Product Info   : k62v1_64_bsp
Product Model  : PD1803BF_EX
Board Platform : mt6765

USERDATA : ENCRYPTED 


Done!
Elapsed: 00:00:21

Code:
Operation : Write Flash [ v2.00 r4 ]

Repartition  : Enabled
Flash Verify : Disabled
Pre-Erase    : Enabled
Verify HW/SW : Enabled
XData Backup : Disabled

Files :24
[FL] : Set : preloader_k62v1_64_bsp.bin
[FL] : Set : preloader_k62v1_64_bsp.bin
[FL] : Set : recovery-verified.img
[FL] : Set : survival-verified.img
[FL] : Set : oem.img
[FL] : Set : efuse.img
[FL] : Set : md1img-verified.img
[FL] : Set : md1dsp-verified.img
[FL] : Set : spmfw-verified.img
[FL] : Set : scp-verified.img
[FL] : Set : scp-verified.img
[FL] : Set : sspm-verified.img
[FL] : Set : sspm-verified.img
[FL] : Set : lk-verified.img
[FL] : Set : lk-verified.img
[FL] : Set : boot-verified.img
[FL] : Set : logo-verified.bin
[FL] : Set : odmdtbo-verified.img
[FL] : Set : tee-verified.img
[FL] : Set : tee-verified.img
[FL] : Set : vendor.img
[FL] : Set : system.img
[FL] : Set : cache.img
[FL] : Set : userdata.img

[FL] : Total size : 0x1391BA344 [ 4.89 GB ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM37)
MODE : BOOTROM
PORT : 37
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+SEL
BROM : BOOTROM
MODE : 0_base : BASE_v1712 | Manual : Enabled
BROM : SLA
BROM : SLA Passed!
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : MT6765
     EMI : SRC : preloader_k62v1_64_bsp.bin
     EMI : CNT : 0009
     EMI : [00] : eMCP : eMMC+LP/DDR3 , ID : 150100524436344D42 : VEN : SAMSUNG   | DEV : RD64MB : RAM : [ 4.00 GB ]
     EMI : [01] : eMCP : eMMC+LP/DDR3 , ID : 150100524836344142 : VEN : SAMSUNG   | DEV : RH64AB : RAM : [ 4.00 GB ]
     EMI : [02] : eMCP : eMMC+LP/DDR3 , ID : 150100474436424D42 : VEN : SAMSUNG   | DEV : GD6BMB : RAM : [ 3.00 GB ]
     EMI : [03] : eMCP : eMMC+LP/DDR3 , ID : 90014A484247346132 : VEN : HYNIX     | DEV : HBG4a2 : RAM : [ 4.00 GB ]
     EMI : [04] : eMCP : eMMC+LP/DDR4 , ID : 150100444836444D42 : VEN : SAMSUNG   | DEV : DH6DMB : RAM : [ 4.00 GB ]
     EMI : [05] : eMCP : eMMC+LP/DDR4 , ID : 150100445636444D42 : VEN : SAMSUNG   | DEV : DV6DMB : RAM : [ 4.00 GB ]
     EMI : [06] : eMCP : eMMC+LP/DDR3 , ID : 90014A68423861503E : VEN : HYNIX     | DEV : hB8aP> : RAM : [ 3.00 GB ]
     EMI : [07] : eMCP : eMMC+LP/DDR3 , ID : 90014A484347386134 : VEN : HYNIX     | DEV : HCG8a4 : RAM : [ 4.00 GB ]
     EMI : [08] : eMCP : eMMC+LP/DDR3 , ID : 150100475036424D42 : VEN : SAMSUNG   | DEV : GP6BMB : RAM : [ 3.00 GB ]
     EMI : Init EMI from PRELOADER
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00040000 [ 256.00 KB ]
        DRAM: 0x30000000 [ 768.00 MB ]

        EMMC: 90014A484247346132A566C2DAEE3593
        EMMC: VEN : HYNIX | OEM : 4A01 | DEV : HBG4a2
        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x747C00000 [ 29.12 GB ]

        CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : E78FE27B32F406C7A840472DE201FE5

DA : USB : HIGH-SPEED

Boot done!


[FL] : HW verification passed!

[FL] : RePartition 
[FL] : RePartition Ok!

[FL] : Flashing now ... 

Write : PRELOADER
Write : PRELOADER_BACKUP
Write : RECOVERY
Write : SURVIVAL
Write : CUST
Write : EFUSE
Write : MD1IMG
Write : MD1DSP
Write : SPMFW
Write : SCP1
Write : SCP2
Write : SSPM_1
Write : SSPM_2
Write : LK
Write : LK2
Write : BOOT
Write : LOGO
Write : ODMDTBO
Write : TEE1
Write : TEE2
Write : VENDOR
Write : SYSTEM
Write : CACHE
Write : USERDATA

[FL] : Flashing finished!


Done!
Elapsed: 00:04:08

Reconnect Power/Cable!
Code:
Operation : Read Security [ v2.00 r4 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM37)
MODE : BOOTROM
PORT : 37
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+SEL
BROM : BOOTROM
MODE : 0_base : BASE_v1712 | Manual : Enabled
BROM : SLA
BROM : SLA Passed!
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_MT6762_0321.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : MT6765
     EMI : SRC : preloader_k62v1_64_bsp.bin
     EMI : CNT : 0009
     EMI : [00] : eMCP : eMMC+LP/DDR3 , ID : 150100524436344D42 : VEN : SAMSUNG   | DEV : RD64MB : RAM : [ 4.00 GB ]
     EMI : [01] : eMCP : eMMC+LP/DDR3 , ID : 150100524836344142 : VEN : SAMSUNG   | DEV : RH64AB : RAM : [ 4.00 GB ]
     EMI : [02] : eMCP : eMMC+LP/DDR3 , ID : 150100474436424D42 : VEN : SAMSUNG   | DEV : GD6BMB : RAM : [ 3.00 GB ]
     EMI : [03] : eMCP : eMMC+LP/DDR3 , ID : 90014A484247346132 : VEN : HYNIX     | DEV : HBG4a2 : RAM : [ 4.00 GB ]
     EMI : [04] : eMCP : eMMC+LP/DDR4 , ID : 150100444836444D42 : VEN : SAMSUNG   | DEV : DH6DMB : RAM : [ 4.00 GB ]
     EMI : [05] : eMCP : eMMC+LP/DDR4 , ID : 150100445636444D42 : VEN : SAMSUNG   | DEV : DV6DMB : RAM : [ 4.00 GB ]
     EMI : [06] : eMCP : eMMC+LP/DDR3 , ID : 90014A68423861503E : VEN : HYNIX     | DEV : hB8aP> : RAM : [ 3.00 GB ]
     EMI : [07] : eMCP : eMMC+LP/DDR3 , ID : 90014A484347386134 : VEN : HYNIX     | DEV : HCG8a4 : RAM : [ 4.00 GB ]
     EMI : [08] : eMCP : eMMC+LP/DDR3 , ID : 150100475036424D42 : VEN : SAMSUNG   | DEV : GP6BMB : RAM : [ 3.00 GB ]
     EMI : Init EMI from PRELOADER
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00040000 [ 256.00 KB ]
        DRAM: 0x30000000 [ 768.00 MB ]

        EMMC: 90014A484247346132A566C2DAEE3593
        EMMC: VEN : HYNIX | OEM : 4A01 | DEV : HBG4a2
        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x747C00000 [ 29.12 GB ]

        CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : E78FE27B32F406C7A840472DE201FE5

DA : USB : HIGH-SPEED

Boot done!


NVRAM check : Passed!

NVM saved as : MT6765__eMMC__.mt_sec
NVM saved to : C:\Users\gemini\Desktop\

Done!
Elapsed: 00:00:21

Reconnect Power/Cable!
Code:
Operation : Memory Tool Init [ v2.00 r4 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM37)
MODE : BOOTROM
PORT : 37
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+SEL
BROM : BOOTROM
MODE : 0_base : BASE_v1712 | Manual : Enabled
BROM : SLA
BROM : SLA Passed!
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_MT6762_0321.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : MT6765
     EMI : SRC : preloader_k62v1_64_bsp.bin
     EMI : CNT : 0009
     EMI : [00] : eMCP : eMMC+LP/DDR3 , ID : 150100524436344D42 : VEN : SAMSUNG   | DEV : RD64MB : RAM : [ 4.00 GB ]
     EMI : [01] : eMCP : eMMC+LP/DDR3 , ID : 150100524836344142 : VEN : SAMSUNG   | DEV : RH64AB : RAM : [ 4.00 GB ]
     EMI : [02] : eMCP : eMMC+LP/DDR3 , ID : 150100474436424D42 : VEN : SAMSUNG   | DEV : GD6BMB : RAM : [ 3.00 GB ]
     EMI : [03] : eMCP : eMMC+LP/DDR3 , ID : 90014A484247346132 : VEN : HYNIX     | DEV : HBG4a2 : RAM : [ 4.00 GB ]
     EMI : [04] : eMCP : eMMC+LP/DDR4 , ID : 150100444836444D42 : VEN : SAMSUNG   | DEV : DH6DMB : RAM : [ 4.00 GB ]
     EMI : [05] : eMCP : eMMC+LP/DDR4 , ID : 150100445636444D42 : VEN : SAMSUNG   | DEV : DV6DMB : RAM : [ 4.00 GB ]
     EMI : [06] : eMCP : eMMC+LP/DDR3 , ID : 90014A68423861503E : VEN : HYNIX     | DEV : hB8aP> : RAM : [ 3.00 GB ]
     EMI : [07] : eMCP : eMMC+LP/DDR3 , ID : 90014A484347386134 : VEN : HYNIX     | DEV : HCG8a4 : RAM : [ 4.00 GB ]
     EMI : [08] : eMCP : eMMC+LP/DDR3 , ID : 150100475036424D42 : VEN : SAMSUNG   | DEV : GP6BMB : RAM : [ 3.00 GB ]
     EMI : Init EMI from PRELOADER
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00040000 [ 256.00 KB ]
        DRAM: 0x30000000 [ 768.00 MB ]

        EMMC: 90014A484247346132A566C2DAEE3593
        EMMC: VEN : HYNIX | OEM : 4A01 | DEV : HBG4a2
        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x747C00000 [ 29.12 GB ]

        CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : E78FE27B32F406C7A840472DE201FE5

DA : USB : HIGH-SPEED

Boot done!

Set default path : C:\InfinityBox\CM2MT2\phdata\

Ready!

Operation : Erase Memory [ v2.00 r4 ]

Erase selected partitions [2]
[0] Erase partition : CACHE
Erase partition Ok!
[1] Erase partition : USERDATA
Erase partition Ok!

Operation finished!


Close MemoryTool session

Done!
Elapsed: 00:00:42

Reconnect Power/Cable!
Note: Some operation have bugs i hope in next version all will be fixed
Thanks to my friend who provide me working DA file
Last edited by kamal_singla; 10-22-2018 at 13:27.
  Reply With Quote
The Following 12 Users Say Thank You to kamal_singla For This Useful Post:
Show/Hide list of the thanked
Old 10-22-2018, 14:34   #2 (permalink)
No Life Poster
 
kothamamun's Avatar
 
Join Date: Apr 2016
Location: B A N G L A D E S H
Posts: 3,189
Member: 2556542
Status: Offline
Thanks Meter: 1,790
infinity needs to improve lot of unsuported phone,however world best product
  Reply With Quote
The Following 4 Users Say Thank You to kothamamun For This Useful Post:
Show/Hide list of the thanked
Old 10-23-2018, 06:51   #3 (permalink)
Freak Poster
 
Join Date: Jul 2016
Location: phillipines
Posts: 323
Member: 2596094
Status: Offline
Thanks Meter: 83
Quote:
Originally Posted by kamal_singla View Post
Code:
Operation : Identify [ v2.00 r4 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM37)
MODE : BOOTROM
PORT : 37
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+SEL
BROM : BOOTROM
MODE : 0_base : BASE_v1712 | Manual : Enabled
BROM : SLA
BROM : SLA Passed!
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : MT6765
     EMI : SRC : preloader_k62v1_64_bsp.bin
     EMI : CNT : 0009
     EMI : [00] : eMCP : eMMC+LP/DDR3 , ID : 150100524436344D42 : VEN : SAMSUNG   | DEV : RD64MB : RAM : [ 4.00 GB ]
     EMI : [01] : eMCP : eMMC+LP/DDR3 , ID : 150100524836344142 : VEN : SAMSUNG   | DEV : RH64AB : RAM : [ 4.00 GB ]
     EMI : [02] : eMCP : eMMC+LP/DDR3 , ID : 150100474436424D42 : VEN : SAMSUNG   | DEV : GD6BMB : RAM : [ 3.00 GB ]
     EMI : [03] : eMCP : eMMC+LP/DDR3 , ID : 90014A484247346132 : VEN : HYNIX     | DEV : HBG4a2 : RAM : [ 4.00 GB ]
     EMI : [04] : eMCP : eMMC+LP/DDR4 , ID : 150100444836444D42 : VEN : SAMSUNG   | DEV : DH6DMB : RAM : [ 4.00 GB ]
     EMI : [05] : eMCP : eMMC+LP/DDR4 , ID : 150100445636444D42 : VEN : SAMSUNG   | DEV : DV6DMB : RAM : [ 4.00 GB ]
     EMI : [06] : eMCP : eMMC+LP/DDR3 , ID : 90014A68423861503E : VEN : HYNIX     | DEV : hB8aP> : RAM : [ 3.00 GB ]
     EMI : [07] : eMCP : eMMC+LP/DDR3 , ID : 90014A484347386134 : VEN : HYNIX     | DEV : HCG8a4 : RAM : [ 4.00 GB ]
     EMI : [08] : eMCP : eMMC+LP/DDR3 , ID : 150100475036424D42 : VEN : SAMSUNG   | DEV : GP6BMB : RAM : [ 3.00 GB ]
     EMI : Init EMI from PRELOADER
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00040000 [ 256.00 KB ]
        DRAM: 0x30000000 [ 768.00 MB ]

        EMMC: 90014A484247346132A566C2DAEE3593
        EMMC: VEN : HYNIX | OEM : 4A01 | DEV : HBG4a2
        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x747C00000 [ 29.12 GB ]

        CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : E78FE27B32F406C7A840472DE201FE5

DA : USB : HIGH-SPEED

Boot done!

Patch Level    : O11019
Display ID     : O11019 release-keys
Ver. CodeName  : REL
Ver. Release   : 8.1.0
Sec. Patch     : 2018-06-05
Build Time     : 1529744454
Product Model  : vivo 1802
Product Brand  : vivo
Product Name   : PD1803BF_EX
Product Device : PD1803BF_EX
Product Manfct : vivo
Product Info   : k62v1_64_bsp
Product Model  : PD1803BF_EX
Board Platform : mt6765

USERDATA : ENCRYPTED 


Done!
Elapsed: 00:00:21

Code:
Operation : Write Flash [ v2.00 r4 ]

Repartition  : Enabled
Flash Verify : Disabled
Pre-Erase    : Enabled
Verify HW/SW : Enabled
XData Backup : Disabled

Files :24
[FL] : Set : preloader_k62v1_64_bsp.bin
[FL] : Set : preloader_k62v1_64_bsp.bin
[FL] : Set : recovery-verified.img
[FL] : Set : survival-verified.img
[FL] : Set : oem.img
[FL] : Set : efuse.img
[FL] : Set : md1img-verified.img
[FL] : Set : md1dsp-verified.img
[FL] : Set : spmfw-verified.img
[FL] : Set : scp-verified.img
[FL] : Set : scp-verified.img
[FL] : Set : sspm-verified.img
[FL] : Set : sspm-verified.img
[FL] : Set : lk-verified.img
[FL] : Set : lk-verified.img
[FL] : Set : boot-verified.img
[FL] : Set : logo-verified.bin
[FL] : Set : odmdtbo-verified.img
[FL] : Set : tee-verified.img
[FL] : Set : tee-verified.img
[FL] : Set : vendor.img
[FL] : Set : system.img
[FL] : Set : cache.img
[FL] : Set : userdata.img

[FL] : Total size : 0x1391BA344 [ 4.89 GB ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM37)
MODE : BOOTROM
PORT : 37
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+SEL
BROM : BOOTROM
MODE : 0_base : BASE_v1712 | Manual : Enabled
BROM : SLA
BROM : SLA Passed!
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : MT6765
     EMI : SRC : preloader_k62v1_64_bsp.bin
     EMI : CNT : 0009
     EMI : [00] : eMCP : eMMC+LP/DDR3 , ID : 150100524436344D42 : VEN : SAMSUNG   | DEV : RD64MB : RAM : [ 4.00 GB ]
     EMI : [01] : eMCP : eMMC+LP/DDR3 , ID : 150100524836344142 : VEN : SAMSUNG   | DEV : RH64AB : RAM : [ 4.00 GB ]
     EMI : [02] : eMCP : eMMC+LP/DDR3 , ID : 150100474436424D42 : VEN : SAMSUNG   | DEV : GD6BMB : RAM : [ 3.00 GB ]
     EMI : [03] : eMCP : eMMC+LP/DDR3 , ID : 90014A484247346132 : VEN : HYNIX     | DEV : HBG4a2 : RAM : [ 4.00 GB ]
     EMI : [04] : eMCP : eMMC+LP/DDR4 , ID : 150100444836444D42 : VEN : SAMSUNG   | DEV : DH6DMB : RAM : [ 4.00 GB ]
     EMI : [05] : eMCP : eMMC+LP/DDR4 , ID : 150100445636444D42 : VEN : SAMSUNG   | DEV : DV6DMB : RAM : [ 4.00 GB ]
     EMI : [06] : eMCP : eMMC+LP/DDR3 , ID : 90014A68423861503E : VEN : HYNIX     | DEV : hB8aP> : RAM : [ 3.00 GB ]
     EMI : [07] : eMCP : eMMC+LP/DDR3 , ID : 90014A484347386134 : VEN : HYNIX     | DEV : HCG8a4 : RAM : [ 4.00 GB ]
     EMI : [08] : eMCP : eMMC+LP/DDR3 , ID : 150100475036424D42 : VEN : SAMSUNG   | DEV : GP6BMB : RAM : [ 3.00 GB ]
     EMI : Init EMI from PRELOADER
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00040000 [ 256.00 KB ]
        DRAM: 0x30000000 [ 768.00 MB ]

        EMMC: 90014A484247346132A566C2DAEE3593
        EMMC: VEN : HYNIX | OEM : 4A01 | DEV : HBG4a2
        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x747C00000 [ 29.12 GB ]

        CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : E78FE27B32F406C7A840472DE201FE5

DA : USB : HIGH-SPEED

Boot done!


[FL] : HW verification passed!

[FL] : RePartition 
[FL] : RePartition Ok!

[FL] : Flashing now ... 

Write : PRELOADER
Write : PRELOADER_BACKUP
Write : RECOVERY
Write : SURVIVAL
Write : CUST
Write : EFUSE
Write : MD1IMG
Write : MD1DSP
Write : SPMFW
Write : SCP1
Write : SCP2
Write : SSPM_1
Write : SSPM_2
Write : LK
Write : LK2
Write : BOOT
Write : LOGO
Write : ODMDTBO
Write : TEE1
Write : TEE2
Write : VENDOR
Write : SYSTEM
Write : CACHE
Write : USERDATA

[FL] : Flashing finished!


Done!
Elapsed: 00:04:08

Reconnect Power/Cable!
Code:
Operation : Read Security [ v2.00 r4 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM37)
MODE : BOOTROM
PORT : 37
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+SEL
BROM : BOOTROM
MODE : 0_base : BASE_v1712 | Manual : Enabled
BROM : SLA
BROM : SLA Passed!
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_MT6762_0321.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : MT6765
     EMI : SRC : preloader_k62v1_64_bsp.bin
     EMI : CNT : 0009
     EMI : [00] : eMCP : eMMC+LP/DDR3 , ID : 150100524436344D42 : VEN : SAMSUNG   | DEV : RD64MB : RAM : [ 4.00 GB ]
     EMI : [01] : eMCP : eMMC+LP/DDR3 , ID : 150100524836344142 : VEN : SAMSUNG   | DEV : RH64AB : RAM : [ 4.00 GB ]
     EMI : [02] : eMCP : eMMC+LP/DDR3 , ID : 150100474436424D42 : VEN : SAMSUNG   | DEV : GD6BMB : RAM : [ 3.00 GB ]
     EMI : [03] : eMCP : eMMC+LP/DDR3 , ID : 90014A484247346132 : VEN : HYNIX     | DEV : HBG4a2 : RAM : [ 4.00 GB ]
     EMI : [04] : eMCP : eMMC+LP/DDR4 , ID : 150100444836444D42 : VEN : SAMSUNG   | DEV : DH6DMB : RAM : [ 4.00 GB ]
     EMI : [05] : eMCP : eMMC+LP/DDR4 , ID : 150100445636444D42 : VEN : SAMSUNG   | DEV : DV6DMB : RAM : [ 4.00 GB ]
     EMI : [06] : eMCP : eMMC+LP/DDR3 , ID : 90014A68423861503E : VEN : HYNIX     | DEV : hB8aP> : RAM : [ 3.00 GB ]
     EMI : [07] : eMCP : eMMC+LP/DDR3 , ID : 90014A484347386134 : VEN : HYNIX     | DEV : HCG8a4 : RAM : [ 4.00 GB ]
     EMI : [08] : eMCP : eMMC+LP/DDR3 , ID : 150100475036424D42 : VEN : SAMSUNG   | DEV : GP6BMB : RAM : [ 3.00 GB ]
     EMI : Init EMI from PRELOADER
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00040000 [ 256.00 KB ]
        DRAM: 0x30000000 [ 768.00 MB ]

        EMMC: 90014A484247346132A566C2DAEE3593
        EMMC: VEN : HYNIX | OEM : 4A01 | DEV : HBG4a2
        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x747C00000 [ 29.12 GB ]

        CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : E78FE27B32F406C7A840472DE201FE5

DA : USB : HIGH-SPEED

Boot done!


NVRAM check : Passed!

NVM saved as : MT6765__eMMC__.mt_sec
NVM saved to : C:\Users\gemini\Desktop\

Done!
Elapsed: 00:00:21

Reconnect Power/Cable!
Code:
Operation : Memory Tool Init [ v2.00 r4 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM37)
MODE : BOOTROM
PORT : 37
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+SEL
BROM : BOOTROM
MODE : 0_base : BASE_v1712 | Manual : Enabled
BROM : SLA
BROM : SLA Passed!
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_MT6762_0321.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : MT6765
     EMI : SRC : preloader_k62v1_64_bsp.bin
     EMI : CNT : 0009
     EMI : [00] : eMCP : eMMC+LP/DDR3 , ID : 150100524436344D42 : VEN : SAMSUNG   | DEV : RD64MB : RAM : [ 4.00 GB ]
     EMI : [01] : eMCP : eMMC+LP/DDR3 , ID : 150100524836344142 : VEN : SAMSUNG   | DEV : RH64AB : RAM : [ 4.00 GB ]
     EMI : [02] : eMCP : eMMC+LP/DDR3 , ID : 150100474436424D42 : VEN : SAMSUNG   | DEV : GD6BMB : RAM : [ 3.00 GB ]
     EMI : [03] : eMCP : eMMC+LP/DDR3 , ID : 90014A484247346132 : VEN : HYNIX     | DEV : HBG4a2 : RAM : [ 4.00 GB ]
     EMI : [04] : eMCP : eMMC+LP/DDR4 , ID : 150100444836444D42 : VEN : SAMSUNG   | DEV : DH6DMB : RAM : [ 4.00 GB ]
     EMI : [05] : eMCP : eMMC+LP/DDR4 , ID : 150100445636444D42 : VEN : SAMSUNG   | DEV : DV6DMB : RAM : [ 4.00 GB ]
     EMI : [06] : eMCP : eMMC+LP/DDR3 , ID : 90014A68423861503E : VEN : HYNIX     | DEV : hB8aP> : RAM : [ 3.00 GB ]
     EMI : [07] : eMCP : eMMC+LP/DDR3 , ID : 90014A484347386134 : VEN : HYNIX     | DEV : HCG8a4 : RAM : [ 4.00 GB ]
     EMI : [08] : eMCP : eMMC+LP/DDR3 , ID : 150100475036424D42 : VEN : SAMSUNG   | DEV : GP6BMB : RAM : [ 3.00 GB ]
     EMI : Init EMI from PRELOADER
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00040000 [ 256.00 KB ]
        DRAM: 0x30000000 [ 768.00 MB ]

        EMMC: 90014A484247346132A566C2DAEE3593
        EMMC: VEN : HYNIX | OEM : 4A01 | DEV : HBG4a2
        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x747C00000 [ 29.12 GB ]

        CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : E78FE27B32F406C7A840472DE201FE5

DA : USB : HIGH-SPEED

Boot done!

Set default path : C:\InfinityBox\CM2MT2\phdata\

Ready!

Operation : Erase Memory [ v2.00 r4 ]

Erase selected partitions [2]
[0] Erase partition : CACHE
Erase partition Ok!
[1] Erase partition : USERDATA
Erase partition Ok!

Operation finished!


Close MemoryTool session

Done!
Elapsed: 00:00:42

Reconnect Power/Cable!
Note: Some operation have bugs i hope in next version all will be fixed
Thanks to my friend who provide me working DA file
Can you share the da files
  Reply With Quote
Old 10-23-2018, 06:59   #4 (permalink)
No Life Poster
 
Join Date: Jan 2009
Location: india
Posts: 885
Member: 942210
Status: Offline
Sonork: 1511
Thanks Meter: 91
please share the da files
  Reply With Quote
Old 10-23-2018, 07:34   #5 (permalink)
No Life Poster
 
Join Date: Oct 2011
Location: Nigeria
Posts: 6,593
Member: 1677653
Status: Offline
Thanks Meter: 2,769
Please upload DA FILE to infinity support area
  Reply With Quote
Old 10-23-2018, 07:39   #6 (permalink)
Freak Poster
 
Join Date: Jul 2016
Location: phillipines
Posts: 323
Member: 2596094
Status: Offline
Thanks Meter: 83
Yes agree upload da files to infinity soppurt to help other user thankss
  Reply With Quote
Old 10-23-2018, 07:39   #7 (permalink)
No Life Poster
 
Join Date: Aug 2010
Location: find me
Posts: 1,737
Member: 1377174
Status: Offline
Thanks Meter: 226
plz sahre da file hare
  Reply With Quote
Old 10-23-2018, 07:42   #8 (permalink)
No Life Poster
 
kothamamun's Avatar
 
Join Date: Apr 2016
Location: B A N G L A D E S H
Posts: 3,189
Member: 2556542
Status: Offline
Thanks Meter: 1,790
@kamal singla
why you dont answer us,whats your problem to share DA file.
explain us.
people dont like unexpected message from you.
  Reply With Quote
Old 10-23-2018, 13:43   #9 (permalink)
Product Supporter
 
kamal_singla's Avatar
 
Join Date: Jun 2014
Location: India
Posts: 5,063
Member: 2211790
Status: Offline
Thanks Meter: 5,118
Quote:
Originally Posted by chezzter View Post
Can you share the da files
Quote:
Originally Posted by parth gupta View Post
please share the da files
Quote:
Originally Posted by Yusuf Lawal View Post
Please upload DA FILE to infinity support area
Quote:
Originally Posted by chezzter View Post
Yes agree upload da files to infinity soppurt to help other user thankss
Quote:
Originally Posted by samreen111 View Post
plz sahre da file hare
Quote:
Originally Posted by kothamamun View Post
@kamal singla
why you dont answer us,whats your problem to share DA file.
explain us.
people dont like unexpected message from you.

hi
all
share DA either in public or in support not safe easily can be copied
so please either wait to get encrypted DA or wait for next version released

sorry for inconvenience
  Reply With Quote
The Following 3 Users Say Thank You to kamal_singla For This Useful Post:
Show/Hide list of the thanked
Old 10-24-2018, 14:37   #10 (permalink)
No Life Poster
 
gracy_elec's Avatar
 
Join Date: Feb 2005
Location: GSM WORLD
Posts: 2,079
Member: 118520
Status: Offline
Thanks Meter: 3,551
Smile Congratulations sir
HELLO @kamal_singla; CONGRATULATIONS SIR FOR YOUR HARD SUCCESS REPORT

GOOD LUCK
  Reply With Quote
The Following User Says Thank You to gracy_elec For This Useful Post:
Old 10-24-2018, 14:50   #11 (permalink)
No Life Poster
 
sneha's Avatar
 
Join Date: Aug 2006
Location: BHARAT
Posts: 3,076
Member: 327043
Status: Offline
Sonork: 100.1587811
Thanks Meter: 1,514
Quote:
Originally Posted by kamal_singla View Post
Code:
Operation : Identify [ v2.00 r4 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM37)
MODE : BOOTROM
PORT : 37
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+SEL
BROM : BOOTROM
MODE : 0_base : BASE_v1712 | Manual : Enabled
BROM : SLA
BROM : SLA Passed!
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : MT6765
     EMI : SRC : preloader_k62v1_64_bsp.bin
     EMI : CNT : 0009
     EMI : [00] : eMCP : eMMC+LP/DDR3 , ID : 150100524436344D42 : VEN : SAMSUNG   | DEV : RD64MB : RAM : [ 4.00 GB ]
     EMI : [01] : eMCP : eMMC+LP/DDR3 , ID : 150100524836344142 : VEN : SAMSUNG   | DEV : RH64AB : RAM : [ 4.00 GB ]
     EMI : [02] : eMCP : eMMC+LP/DDR3 , ID : 150100474436424D42 : VEN : SAMSUNG   | DEV : GD6BMB : RAM : [ 3.00 GB ]
     EMI : [03] : eMCP : eMMC+LP/DDR3 , ID : 90014A484247346132 : VEN : HYNIX     | DEV : HBG4a2 : RAM : [ 4.00 GB ]
     EMI : [04] : eMCP : eMMC+LP/DDR4 , ID : 150100444836444D42 : VEN : SAMSUNG   | DEV : DH6DMB : RAM : [ 4.00 GB ]
     EMI : [05] : eMCP : eMMC+LP/DDR4 , ID : 150100445636444D42 : VEN : SAMSUNG   | DEV : DV6DMB : RAM : [ 4.00 GB ]
     EMI : [06] : eMCP : eMMC+LP/DDR3 , ID : 90014A68423861503E : VEN : HYNIX     | DEV : hB8aP> : RAM : [ 3.00 GB ]
     EMI : [07] : eMCP : eMMC+LP/DDR3 , ID : 90014A484347386134 : VEN : HYNIX     | DEV : HCG8a4 : RAM : [ 4.00 GB ]
     EMI : [08] : eMCP : eMMC+LP/DDR3 , ID : 150100475036424D42 : VEN : SAMSUNG   | DEV : GP6BMB : RAM : [ 3.00 GB ]
     EMI : Init EMI from PRELOADER
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00040000 [ 256.00 KB ]
        DRAM: 0x30000000 [ 768.00 MB ]

        EMMC: 90014A484247346132A566C2DAEE3593
        EMMC: VEN : HYNIX | OEM : 4A01 | DEV : HBG4a2
        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x747C00000 [ 29.12 GB ]

        CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : E78FE27B32F406C7A840472DE201FE5

DA : USB : HIGH-SPEED

Boot done!

Patch Level    : O11019
Display ID     : O11019 release-keys
Ver. CodeName  : REL
Ver. Release   : 8.1.0
Sec. Patch     : 2018-06-05
Build Time     : 1529744454
Product Model  : vivo 1802
Product Brand  : vivo
Product Name   : PD1803BF_EX
Product Device : PD1803BF_EX
Product Manfct : vivo
Product Info   : k62v1_64_bsp
Product Model  : PD1803BF_EX
Board Platform : mt6765

USERDATA : ENCRYPTED 


Done!
Elapsed: 00:00:21
Code:
Operation : Write Flash [ v2.00 r4 ]

Repartition  : Enabled
Flash Verify : Disabled
Pre-Erase    : Enabled
Verify HW/SW : Enabled
XData Backup : Disabled

Files :24
[FL] : Set : preloader_k62v1_64_bsp.bin
[FL] : Set : preloader_k62v1_64_bsp.bin
[FL] : Set : recovery-verified.img
[FL] : Set : survival-verified.img
[FL] : Set : oem.img
[FL] : Set : efuse.img
[FL] : Set : md1img-verified.img
[FL] : Set : md1dsp-verified.img
[FL] : Set : spmfw-verified.img
[FL] : Set : scp-verified.img
[FL] : Set : scp-verified.img
[FL] : Set : sspm-verified.img
[FL] : Set : sspm-verified.img
[FL] : Set : lk-verified.img
[FL] : Set : lk-verified.img
[FL] : Set : boot-verified.img
[FL] : Set : logo-verified.bin
[FL] : Set : odmdtbo-verified.img
[FL] : Set : tee-verified.img
[FL] : Set : tee-verified.img
[FL] : Set : vendor.img
[FL] : Set : system.img
[FL] : Set : cache.img
[FL] : Set : userdata.img

[FL] : Total size : 0x1391BA344 [ 4.89 GB ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM37)
MODE : BOOTROM
PORT : 37
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+SEL
BROM : BOOTROM
MODE : 0_base : BASE_v1712 | Manual : Enabled
BROM : SLA
BROM : SLA Passed!
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : MT6765
     EMI : SRC : preloader_k62v1_64_bsp.bin
     EMI : CNT : 0009
     EMI : [00] : eMCP : eMMC+LP/DDR3 , ID : 150100524436344D42 : VEN : SAMSUNG   | DEV : RD64MB : RAM : [ 4.00 GB ]
     EMI : [01] : eMCP : eMMC+LP/DDR3 , ID : 150100524836344142 : VEN : SAMSUNG   | DEV : RH64AB : RAM : [ 4.00 GB ]
     EMI : [02] : eMCP : eMMC+LP/DDR3 , ID : 150100474436424D42 : VEN : SAMSUNG   | DEV : GD6BMB : RAM : [ 3.00 GB ]
     EMI : [03] : eMCP : eMMC+LP/DDR3 , ID : 90014A484247346132 : VEN : HYNIX     | DEV : HBG4a2 : RAM : [ 4.00 GB ]
     EMI : [04] : eMCP : eMMC+LP/DDR4 , ID : 150100444836444D42 : VEN : SAMSUNG   | DEV : DH6DMB : RAM : [ 4.00 GB ]
     EMI : [05] : eMCP : eMMC+LP/DDR4 , ID : 150100445636444D42 : VEN : SAMSUNG   | DEV : DV6DMB : RAM : [ 4.00 GB ]
     EMI : [06] : eMCP : eMMC+LP/DDR3 , ID : 90014A68423861503E : VEN : HYNIX     | DEV : hB8aP> : RAM : [ 3.00 GB ]
     EMI : [07] : eMCP : eMMC+LP/DDR3 , ID : 90014A484347386134 : VEN : HYNIX     | DEV : HCG8a4 : RAM : [ 4.00 GB ]
     EMI : [08] : eMCP : eMMC+LP/DDR3 , ID : 150100475036424D42 : VEN : SAMSUNG   | DEV : GP6BMB : RAM : [ 3.00 GB ]
     EMI : Init EMI from PRELOADER
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00040000 [ 256.00 KB ]
        DRAM: 0x30000000 [ 768.00 MB ]

        EMMC: 90014A484247346132A566C2DAEE3593
        EMMC: VEN : HYNIX | OEM : 4A01 | DEV : HBG4a2
        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x747C00000 [ 29.12 GB ]

        CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : E78FE27B32F406C7A840472DE201FE5

DA : USB : HIGH-SPEED

Boot done!


[FL] : HW verification passed!

[FL] : RePartition 
[FL] : RePartition Ok!

[FL] : Flashing now ... 

Write : PRELOADER
Write : PRELOADER_BACKUP
Write : RECOVERY
Write : SURVIVAL
Write : CUST
Write : EFUSE
Write : MD1IMG
Write : MD1DSP
Write : SPMFW
Write : SCP1
Write : SCP2
Write : SSPM_1
Write : SSPM_2
Write : LK
Write : LK2
Write : BOOT
Write : LOGO
Write : ODMDTBO
Write : TEE1
Write : TEE2
Write : VENDOR
Write : SYSTEM
Write : CACHE
Write : USERDATA

[FL] : Flashing finished!


Done!
Elapsed: 00:04:08

Reconnect Power/Cable!
Code:
Operation : Read Security [ v2.00 r4 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM37)
MODE : BOOTROM
PORT : 37
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+SEL
BROM : BOOTROM
MODE : 0_base : BASE_v1712 | Manual : Enabled
BROM : SLA
BROM : SLA Passed!
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_MT6762_0321.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : MT6765
     EMI : SRC : preloader_k62v1_64_bsp.bin
     EMI : CNT : 0009
     EMI : [00] : eMCP : eMMC+LP/DDR3 , ID : 150100524436344D42 : VEN : SAMSUNG   | DEV : RD64MB : RAM : [ 4.00 GB ]
     EMI : [01] : eMCP : eMMC+LP/DDR3 , ID : 150100524836344142 : VEN : SAMSUNG   | DEV : RH64AB : RAM : [ 4.00 GB ]
     EMI : [02] : eMCP : eMMC+LP/DDR3 , ID : 150100474436424D42 : VEN : SAMSUNG   | DEV : GD6BMB : RAM : [ 3.00 GB ]
     EMI : [03] : eMCP : eMMC+LP/DDR3 , ID : 90014A484247346132 : VEN : HYNIX     | DEV : HBG4a2 : RAM : [ 4.00 GB ]
     EMI : [04] : eMCP : eMMC+LP/DDR4 , ID : 150100444836444D42 : VEN : SAMSUNG   | DEV : DH6DMB : RAM : [ 4.00 GB ]
     EMI : [05] : eMCP : eMMC+LP/DDR4 , ID : 150100445636444D42 : VEN : SAMSUNG   | DEV : DV6DMB : RAM : [ 4.00 GB ]
     EMI : [06] : eMCP : eMMC+LP/DDR3 , ID : 90014A68423861503E : VEN : HYNIX     | DEV : hB8aP> : RAM : [ 3.00 GB ]
     EMI : [07] : eMCP : eMMC+LP/DDR3 , ID : 90014A484347386134 : VEN : HYNIX     | DEV : HCG8a4 : RAM : [ 4.00 GB ]
     EMI : [08] : eMCP : eMMC+LP/DDR3 , ID : 150100475036424D42 : VEN : SAMSUNG   | DEV : GP6BMB : RAM : [ 3.00 GB ]
     EMI : Init EMI from PRELOADER
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00040000 [ 256.00 KB ]
        DRAM: 0x30000000 [ 768.00 MB ]

        EMMC: 90014A484247346132A566C2DAEE3593
        EMMC: VEN : HYNIX | OEM : 4A01 | DEV : HBG4a2
        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x747C00000 [ 29.12 GB ]

        CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : E78FE27B32F406C7A840472DE201FE5

DA : USB : HIGH-SPEED

Boot done!


NVRAM check : Passed!

NVM saved as : MT6765__eMMC__.mt_sec
NVM saved to : C:\Users\gemini\Desktop\

Done!
Elapsed: 00:00:21

Reconnect Power/Cable!
Code:
Operation : Memory Tool Init [ v2.00 r4 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM37)
MODE : BOOTROM
PORT : 37
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+SEL
BROM : BOOTROM
MODE : 0_base : BASE_v1712 | Manual : Enabled
BROM : SLA
BROM : SLA Passed!
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_MT6762_0321.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : MT6765
     EMI : SRC : preloader_k62v1_64_bsp.bin
     EMI : CNT : 0009
     EMI : [00] : eMCP : eMMC+LP/DDR3 , ID : 150100524436344D42 : VEN : SAMSUNG   | DEV : RD64MB : RAM : [ 4.00 GB ]
     EMI : [01] : eMCP : eMMC+LP/DDR3 , ID : 150100524836344142 : VEN : SAMSUNG   | DEV : RH64AB : RAM : [ 4.00 GB ]
     EMI : [02] : eMCP : eMMC+LP/DDR3 , ID : 150100474436424D42 : VEN : SAMSUNG   | DEV : GD6BMB : RAM : [ 3.00 GB ]
     EMI : [03] : eMCP : eMMC+LP/DDR3 , ID : 90014A484247346132 : VEN : HYNIX     | DEV : HBG4a2 : RAM : [ 4.00 GB ]
     EMI : [04] : eMCP : eMMC+LP/DDR4 , ID : 150100444836444D42 : VEN : SAMSUNG   | DEV : DH6DMB : RAM : [ 4.00 GB ]
     EMI : [05] : eMCP : eMMC+LP/DDR4 , ID : 150100445636444D42 : VEN : SAMSUNG   | DEV : DV6DMB : RAM : [ 4.00 GB ]
     EMI : [06] : eMCP : eMMC+LP/DDR3 , ID : 90014A68423861503E : VEN : HYNIX     | DEV : hB8aP> : RAM : [ 3.00 GB ]
     EMI : [07] : eMCP : eMMC+LP/DDR3 , ID : 90014A484347386134 : VEN : HYNIX     | DEV : HCG8a4 : RAM : [ 4.00 GB ]
     EMI : [08] : eMCP : eMMC+LP/DDR3 , ID : 150100475036424D42 : VEN : SAMSUNG   | DEV : GP6BMB : RAM : [ 3.00 GB ]
     EMI : Init EMI from PRELOADER
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00040000 [ 256.00 KB ]
        DRAM: 0x30000000 [ 768.00 MB ]

        EMMC: 90014A484247346132A566C2DAEE3593
        EMMC: VEN : HYNIX | OEM : 4A01 | DEV : HBG4a2
        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x747C00000 [ 29.12 GB ]

        CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : E78FE27B32F406C7A840472DE201FE5

DA : USB : HIGH-SPEED

Boot done!

Set default path : C:\InfinityBox\CM2MT2\phdata\

Ready!

Operation : Erase Memory [ v2.00 r4 ]

Erase selected partitions [2]
[0] Erase partition : CACHE
Erase partition Ok!
[1] Erase partition : USERDATA
Erase partition Ok!

Operation finished!


Close MemoryTool session

Done!
Elapsed: 00:00:42

Reconnect Power/Cable!
Note: Some operation have bugs i hope in next version all will be fixed
Thanks to my friend who provide me working DA file

interesting logs in yellow mark
  Reply With Quote
Old 10-24-2018, 14:55   #12 (permalink)
No Life Poster
 
Join Date: Mar 2011
Location: Faisalabad
Posts: 1,482
Member: 1527968
Status: Offline
Sonork: 100.1651182
Thanks Meter: 483
Vivo Y81s and y83 its same.................?
  Reply With Quote
Old 10-24-2018, 17:09   #13 (permalink)
Product Supporter
 
kamal_singla's Avatar
 
Join Date: Jun 2014
Location: India
Posts: 5,063
Member: 2211790
Status: Offline
Thanks Meter: 5,118
Quote:
Originally Posted by alimobile279 View Post
Vivo Y81s and y83 its same.................?
Yes both have cpu same
  Reply With Quote
Old 10-24-2018, 17:10   #14 (permalink)
Product Supporter
 
kamal_singla's Avatar
 
Join Date: Jun 2014
Location: India
Posts: 5,063
Member: 2211790
Status: Offline
Thanks Meter: 5,118
Quote:
Originally Posted by sneha View Post
interesting logs in yellow mark
Yes first i edited then i used original
Glad you noticed
  Reply With Quote
Old 10-25-2018, 06:49   #15 (permalink)
No Life Poster
 
srinibas's Avatar
 
Join Date: Apr 2007
Location: M W Balasore,Odisha,INDIA
Age: 52
Posts: 12,752
Member: 492222
Status: Offline
Sonork: 100.1594126
Thanks Meter: 10,377
Quote:
Originally Posted by kamal_singla View Post
Yes first i edited then i used original
Glad you noticed
Posting edited log is one type of crime or you can say offence, You can hide a part or make it hazy but editing ? Unfortunate .......

What is the difference between others ?



No Regards
  Reply With Quote
The Following User Says Thank You to srinibas For This Useful Post:
Reply
Page 1 of 2 1 2

Bookmarks

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 



All times are GMT +1. The time now is 09:56.

Contact Us - GSM-Forum - Archive - Top


Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.40665 seconds with 8 queries

SEO by vBSEO