YAHOOOOOO... Qmobile M88 SP7731GEA Read FFW Done With CM2 - GSM-Forum

Warisgsm · 12-11-2015, 06:31

Qmobile M88 SP7731GEA Read FFW Done With CM2

Card found: S/N : 7BD0661F , v0129
Chinese Miracle II [SPD module] v 1.07

Operation : Read FullFlash [ v1.07 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 29 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Step #1 Passed!
[FW_READER] : Step #2 Passed!
[FW_READER] : Step #3 Passed!

Phone found! [ 29 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name : M88
Model Brand : QMobile
Model Device: M88
AndrVersion : 4.4.2
BaseBand CPU: SP7731GEA
Project Ver : QMobileM88_MP_31_07
Model Ext : QMobile M88

[Read Mode] : HSUSB Enabled!

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.22.3_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : userdata.img

Firmware Size : 1019 MiB
Saved to : C:\Documents and Settings\WARIS GSM\Desktop\SP7731GEA_M88_4.4.2_QMobileM88_MP_31_0 7\
Done!

Elapsed: 00:21:49

Reconnect Power/Cable!

I Love CM2 Team specially JayDi Sir

sindhi.aslam1 · 12-26-2015, 08:59

Need help.. iam unable to read qmobile m88 spd 7731 with cm2.. plz give your contact info

scorpian1982 · 12-26-2015, 09:16

yes aslam bhai you can contact with me . i will try my best to resolve your issue.

PASSIONATE_BOYS · 12-26-2015, 09:32

Quote:

Originally Posted by sindhi.aslam1

Need help.. iam unable to read qmobile m88 spd 7731 with cm2.. plz give your contact info

Hello,
Just download and read Manual and follow on-screen instruction to read firmware or to do other operation.
Download Manual from here- Index of pub/manual/ChineseMiracle2/

Br.
Infinity Box Support Team.

shahanwer · 12-29-2015, 09:52

Please upload file SP7731GEA_M88_4.4.2_QMobileM88

rahihimkhan · 12-29-2015, 11:40

Q mobile M88 sc7730 mtp driver needed

please upload flash file

khanzada606 · 12-29-2015, 19:23

Yes many of us failed to read this CPU , since after few seconds phone opened a dialogue box and gets restrated and nothing happened after restart .,
Cloud you kindly upload factory file so other take advantage of your hard work
Thanks

rahihimkhan · 12-30-2015, 04:45

please give me mtp driver and Q mobile M88 pac flash file

JayDi · 12-30-2015, 05:47

Quote:

Originally Posted by khanzada606

Yes many of us failed to read this CPU , since after few seconds phone opened a dialogue box and gets restrated and nothing happened after restart .,
Cloud you kindly upload factory file so other take advantage of your hard work
Thanks

Hello. Just read text , when phone goes to power on at first step. All explained.
Also I especially made ADB ask 2 times. If first made NOTHING - wait 40-60 seconds, press OK again and you will get it success.

EjazATF · 01-10-2016, 11:09

Its Working !!!

Code:

 ====  Wait for phone...

Phone found! [ 112 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf 
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Step #1 Passed!
[FW_READER] : Step #2 Passed!
[FW_READER] : Step #3 Passed!

Phone found! [ 112 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf 
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!


Model Name  : M88
Model Brand : QMobile
Model Device: M88
AndrVersion : 4.4.2
BaseBand CPU: SP7731GEA
Project Ver : QMobileM88_MP_31_07
Model Ext   : QMobile M88

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ... 

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.22.3_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : userdata.img

Firmware Size : 1019 MiB
Saved to : C:\Users\Inspiron\Desktop\SP7731GEA_M88_4.4.2_QMobileM88_MP_31_07\
Done!

Elapsed: 00:09:04

Reconnect Power/Cable!

EjazATF · 01-10-2016, 12:41

Written Back to Faulty [Virus Infected] Phone

Code:

 ====  Wait for phone...

Phone found! [ 69 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf 
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!

PMTManager : Load 0x17 records
PMTManager : PMT Update Ok!
Flashing now

Update BootCode : u-boot-spl-16k.bin
Write Data ... 
Write Data Ok!

Update BootCode : u-boot.bin
Erase block ... 
Block erase Ok!
Write Data ... 
Write Data Ok!

Write FSImage : prodnv.img
Write Data ... 
Write Data Ok!

Write CodeData : sc7731g_CP0_modem.bin
Write Data ... 
Write Data Ok!

Write CodeData : DSP_DM_Gx.bin
Write Data ... 
Write Data Ok!

Erase Block : RuntimeData
Erase block ... 
Block erase Ok!

Erase Block : RuntimeData
Erase block ... 
Block erase Ok!

Write CodeData : sc8830g_modem_CP2_WCN_14D_W15.22.3_Release.bin
Write Data ... 
Write Data Ok!

Erase Block : RuntimeData
Erase block ... 
Block erase Ok!

Erase Block : RuntimeData
Erase block ... 
Block erase Ok!

Write CodeData : logo_480x854.bin
Write Data ... 
Write Data Ok!

Write CodeData : fblogo_480x854.bin
Write Data ... 
Write Data Ok!

Write CodeData : boot.img
Write Data ... 
Write Data Ok!

Write FSImage : system.img
Write Data ... 
Write Data Ok!

Write FSImage : cache.img
Write Data ... 
FSImage : Make and Flush SPImage
Write Data Ok!

Write CodeData : recovery.img
Write Data ... 
Write Data Ok!

Process : Flush
Flush Ok!

Write FSImage : userdata.img
Write Data ... 
FSImage : Make and Flush SPImage
Write Data Ok!


Elapsed: 00:02:52

Reconnect Power/Cable!

JayDi · 01-10-2016, 12:53

@EjazATF, maybe you have infected FW read already?

EjazATF · 01-10-2016, 12:54

Quote:

Originally Posted by JayDi

@EjazATF, maybe you have infected FW read already?

Yes, I read [testing base] from faulty phone, then I read again from OKAY phone and then write it back to that faulty phone which log is shown in my first reply

JayDi · 01-10-2016, 12:56

If you have fw from infected - pack and send me it, please. Very need for finish SPD AV.

EjazATF · 01-10-2016, 13:01

Quote:

Originally Posted by JayDi

If you have fw from infected - pack and send me it, please. Very need for finish SPD AV.

Okay, I will send it to you soon.

12-11-2015, 06:31	#1 (permalink)
Warisgsm Freak Poster Join Date: Nov 2015 Location: I LOVE CM2 TEAM Posts: 135 Member: 2493580 Status: Offline Thanks Meter: 14	YAHOOOOOO... Qmobile M88 SP7731GEA Read FFW Done With CM2 Qmobile M88 SP7731GEA Read FFW Done With CM2 Card found: S/N : 7BD0661F , v0129 Chinese Miracle II [SPD module] v 1.07 Operation : Read FullFlash [ v1.07 ] 1. Remove battery. Insert battery back 2. Press and hold 'VolumeUp' and 'VolumeDown' keys 3. Insert cable ==== Wait for phone... Phone found! [ 29 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : SC773x Android 5.x eMMC v1.0 Inf Sending FLASH FDL FLASH FDL Ready! Boot Ok! FlashMode Set : Ok! Detected eMMC Flash , Structure detect Ok! [FW_READER] : Step #1 Passed! [FW_READER] : Step #2 Passed! [FW_READER] : Step #3 Passed! Phone found! [ 29 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : SC773x Android 5.x eMMC v1.0 Inf Sending FLASH FDL FLASH FDL Ready! Boot Ok! Model Name : M88 Model Brand : QMobile Model Device: M88 AndrVersion : 4.4.2 BaseBand CPU: SP7731GEA Project Ver : QMobileM88_MP_31_07 Model Ext : QMobile M88 [Read Mode] : HSUSB Enabled! [FW_READER] : Reading Firmware Now ... [Read Ok] : u-boot-spl-16k.bin [Read Ok] : u-boot.bin [Read Ok] : prodnv.img [Read Ok] : sc7731g_CP0_modem.bin [Read Ok] : DSP_DM_Gx.bin [Read Ok] : nvitem.bin [Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.22.3_Release.bin [Read Ok] : nvitem_wcn.bin [Read Ok] : logo_480x854.bin [Read Ok] : fblogo_480x854.bin [Read Ok] : boot.img [Read Ok] : system.img [Read Ok] : cache.img [Read Ok] : recovery.img [Read Ok] : userdata.img Firmware Size : 1019 MiB Saved to : C:\Documents and Settings\WARIS GSM\Desktop\SP7731GEA_M88_4.4.2_QMobileM88_MP_31_0 7\ Done! Elapsed: 00:21:49 Reconnect Power/Cable! I Love CM2 Team specially JayDi Sir

12-26-2015, 09:16	#3 (permalink)
scorpian1982 No Life Poster Join Date: May 2014 Location: Peshwar, Pakistan Posts: 527 Member: 2192793 Status: Offline Thanks Meter: 188	yes aslam bhai you can contact with me . i will try my best to resolve your issue. Last edited by bod; 01-31-2016 at 13:16. Reason: Contact Details..

12-26-2015, 08:59	#2 (permalink)
sindhi.aslam1 Banned Join Date: Oct 2015 Location: Larkana Sindh Age: 35 Posts: 129 Member: 2479038 Status: Offline Sonork: 100.1668887 Thanks Meter: 70	Need help.. iam unable to read qmobile m88 spd 7731 with cm2.. plz give your contact info

12-29-2015, 09:52	#5 (permalink)
shahanwer Freak Poster Join Date: Oct 2006 Posts: 107 Member: 367718 Status: Offline Thanks Meter: 14	Please upload file SP7731GEA_M88_4.4.2_QMobileM88

12-29-2015, 11:40	#6 (permalink)
rahihimkhan No Life Poster Join Date: Oct 2007 Location: Dera Ismail Khan (KPK) Pak Posts: 2,544 Member: 613449 Status: Offline Sonork: 100.1614074 Thanks Meter: 634	Q mobile M88 sc7730 mtp driver needed please upload flash file

12-29-2015, 19:23	#7 (permalink)
khanzada606 No Life Poster Join Date: Sep 2015 Location: Earth Posts: 2,156 Member: 2455344 Status: Offline Sonork: Ask me Thanks Meter: 420	Yes many of us failed to read this CPU , since after few seconds phone opened a dialogue box and gets restrated and nothing happened after restart ., Cloud you kindly upload factory file so other take advantage of your hard work Thanks

12-30-2015, 04:45	#8 (permalink)
rahihimkhan No Life Poster Join Date: Oct 2007 Location: Dera Ismail Khan (KPK) Pak Posts: 2,544 Member: 613449 Status: Offline Sonork: 100.1614074 Thanks Meter: 634	please give me mtp driver and Q mobile M88 pac flash file

01-10-2016, 12:53	#12 (permalink)
JayDi No Life Poster Join Date: Mar 2007 Location: Where you live Posts: 18,542 Member: 462970 Status: Offline Thanks Meter: 20,352	@EjazATF, maybe you have infected FW read already?

01-10-2016, 12:56	#14 (permalink)
JayDi No Life Poster Join Date: Mar 2007 Location: Where you live Posts: 18,542 Member: 462970 Status: Offline Thanks Meter: 20,352	If you have fw from infected - pack and send me it, please. Very need for finish SPD AV.