z250 dead after flash - GSM-Forum

ponix · 10-27-2010, 23:25

i have z250 start on logo and after shutdown

when i try to flash with infinity-box the phone is dead

blue light only when i press power

please help me

InfinityHelp · 10-28-2010, 19:52

hello!

please open operation.log file and paste here that flashing log.
we must see which flash file you choosed for flashing as well as what was phone's orignal software version.

ponix · 11-06-2010, 11:59

this is the log

Quote:

COM5 [VCP0] selected
module v1.38
Device: Sony-Ericsson-Z250i
"advanced chip detection" active
Action: flash write
"smart write" active
write: Firmware
Z250i_R1F002_ABE-3-1610-000_CXC1251012_firmware.80M.bin
write: Flex/Customization
Z250i_R1F002_CDA102872-31-R4A_flex.80F.bin
skip: Language Pack
skip: FFS/File system
skip: Images
skip: Melody
skip: Eeprom
Checking data, wait...
Boot ...
Phone should be Switched OFF !
Press Power button now !
rom version: 0502
Connecting...
booting...
finalizing...
Boot done
Check connection ...
Check connection done
Set baud ...
812500
Set baud done
Check hardware ...
flash: 89880A00010001:89880A00000000
flash: Intel Intel/Sharp ext [def 00FFx020000 0004x008000] 32Mb
software version: 1540-000
software version: ABE-3-
Check hardware done
Read data ...
reading Sony-Ericsson-Z250i_eeprom_calibration-1...
file saved: D:\Program Files\InfinityBox\HModule\Sony-Ericsson-Z250i_eeprom_calibration-1_20101024-193123.80E.bin
Read data done
Check data ...
Check data done
Write ...
Area: Firmware
flash: 89880A00010001:89880A00000000
Write: Firmware
Area: Flex/Customization
flash: 89880A00000000:89880A00000000
Write: Flex/Customization
Write done
Finished, time used: 11 min 4 sec
Remove/Install battery now !
Warning ! Settings will be cleared, user data erased !
Do you want to continue ?

best regard infinity-box

ponix · 11-08-2010, 22:35

can help me please ..!!!

dimityr.milev · 11-13-2010, 08:55

I have same problem, after unlock phone blink.I flash with R1F002 but phone dead.
Any solution?

derk · 02-09-2013, 06:32

any solution for reviving this model?

derk · 02-09-2013, 14:49

i tried flashing files from support and phone is still dead. please help with this problem.

YellowBoss · 02-09-2013, 20:46

Quote:

Originally Posted by derk

i tried flashing files from support and phone is still dead. please help with this problem.

Hello,

What was the problem with phone before flashing ?

derk · 02-10-2013, 04:55

was trying to unlock with infinity box and after phone just keep restarting.

YellowBoss · 02-10-2013, 19:31

Quote:

Originally Posted by derk

was trying to unlock with infinity box and after phone just keep restarting.

Hello,

It can not be true that phone become damaged just after unlock. It should be another reason.
Post here operation log for unlock operation.

derk · 02-12-2013, 00:50

Why not true. I used cruiser dead tool to unlock the others after phone not work when tried with infinity. Will post log later from infinity.

derk · 02-12-2013, 00:57

Just need to know how to revive phone with infinity now. Any ideas please?

YellowBoss · 02-14-2013, 19:55

Quote:

Originally Posted by derk

Why not true. I used cruiser dead tool to unlock the others after phone not work when tried with infinity. Will post log later from infinity.

If you have damaged phone memory with other tool we do not have methods to repair that kind of damaged phone.

derk · 02-16-2013, 13:12

==== log: [2/18/2012 8:24:16 PM] ====
COM47 [VCP0] selected
module v1.38
Device: Sony-Ericsson-Z250i
"advanced chip detection" active
Action: reset settings
Checking data, wait...
Boot ...
Phone should be Switched OFF !
Press Power button now !
rom version: 0502
Connecting...
booting...
finalizing...
Boot done
Check connection ...
Check connection done
Set baud ...
115200
Set baud done
Check hardware ...
flash: 89880A00010001:89880A00000000
flash: Intel Intel/Sharp ext [def 00FFx020000 0004x008000] 32Mb
software version: 1540-000
software version: ABU-3-
Check hardware done
Read data ...
reading Sony-Ericsson-Z250i_eeprom_calibration-1...
file saved: C:\InfinityBox\HModule\Sony-Ericsson-Z250i_eeprom_calibration-1_20120218-202528.80E.bin
reading Sony-Ericsson-Z250i_ffs...
file saved: C:\InfinityBox\HModule\Sony-Ericsson-Z250i_ffs_20120218-205708.80E.bin
Read data done
Check data ...
warning: Probably wrong model selected,
Do you want to continue ?
model selection confirmed by user
Check data done
Write ...
flash: 89880A00010001:89880A00000000
Erase: ffs
Write done
Finished, time used: 35 min 59 sec
Remove/Install battery now !

==== log: [2/18/2012 9:18:19 PM] ====
COM47 [VCP0] selected
module v1.38
Device: Sony-Ericsson-Z250i
"advanced chip detection" active
Action: unlock
Checking data, wait...
Boot ...
Phone should be Switched OFF !
Press Power button now !
rom version: 0502
Connecting...
booting...
finalizing...
Boot done
Check connection ...
Check connection done
Set baud ...
115200
Set baud done
Check hardware ...
flash: 89880A00010001:89880A00000000
flash: Intel Intel/Sharp ext [def 00FFx020000 0004x008000] 32Mb
software version: 1540-000
software version: ABU-3-
Check hardware done
Read data ...
reading Sony-Ericsson-Z250i_eeprom_calibration-1...
file saved: C:\InfinityBox\HModule\Sony-Ericsson-Z250i_eeprom_calibration-1_20120218-211948.80E.bin
Read data done
Check data ...
warning: Probably wrong model selected,
Do you want to continue ?
model selection confirmed by user
Check data done
Write ...
.............
flash: 89880A00010001:89880A00000000
Write: simlock
Write done
Finished, time used: 2 min 20 sec
Remove/Install battery now !

derk · 02-16-2013, 13:15

Quote:

Originally Posted by YellowBoss

If you have damaged phone memory with other tool we do not have methods to repair that kind of damaged phone.

phone was first tried to unlock with infinity because I know cruiser is dead tool, but when failed I resort to cruiser which unlocked the remaining 2 out of the 3 phones I have of same model, z250a. For the one that didn't work with inifity, to date no other tool was tried to repair it thus far, I'm still waiting on support from infinity to repair the phone which only blinks after unlock with infinity and now dead after flash with infinity.

10-27-2010, 23:25	#1 (permalink)
ponix No Life Poster Join Date: Feb 2006 Location: ALGERIA Posts: 984 Member: 229016 Status: Offline Sonork: 100.1590620 Thanks Meter: 130	z250 dead after flash i have z250 start on logo and after shutdown when i try to flash with infinity-box the phone is dead blue light only when i press power please help me

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
need to flash 6110	paulomt1	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	08-16-2019 19:37
Seeking for flash nokia 5110 old version (3 version) can exchange for new	Tomas	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	10-14-2017 19:29
5110 flash new software , need help	steve	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	4	01-03-2015 05:41
5110 5.24 locked all 4 locks after unlocking...	MCG	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	3	03-07-2000 22:24

10-28-2010, 19:52	#2 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! please open operation.log file and paste here that flashing log. we must see which flash file you choosed for flashing as well as what was phone's orignal software version.

11-08-2010, 22:35	#4 (permalink)
ponix No Life Poster Join Date: Feb 2006 Location: ALGERIA Posts: 984 Member: 229016 Status: Offline Sonork: 100.1590620 Thanks Meter: 130	can help me please ..!!!

11-13-2010, 08:55	#5 (permalink)
dimityr.milev No Life Poster Join Date: Sep 2007 Location: Bulgaria,Assenovgrad Age: 46 Posts: 852 Member: 591325 Status: Offline Thanks Meter: 151	I have same problem, after unlock phone blink.I flash with R1F002 but phone dead. Any solution?

02-09-2013, 06:32	#6 (permalink)
derk No Life Poster Join Date: May 2006 Location: Jamaica Posts: 588 Member: 279555 Status: Offline Thanks Meter: 11	any solution for reviving this model?

02-09-2013, 14:49	#7 (permalink)
derk No Life Poster Join Date: May 2006 Location: Jamaica Posts: 588 Member: 279555 Status: Offline Thanks Meter: 11	i tried flashing files from support and phone is still dead. please help with this problem.

02-10-2013, 04:55	#9 (permalink)
derk No Life Poster Join Date: May 2006 Location: Jamaica Posts: 588 Member: 279555 Status: Offline Thanks Meter: 11	was trying to unlock with infinity box and after phone just keep restarting.

02-12-2013, 00:50	#11 (permalink)
derk No Life Poster Join Date: May 2006 Location: Jamaica Posts: 588 Member: 279555 Status: Offline Thanks Meter: 11	Why not true. I used cruiser dead tool to unlock the others after phone not work when tried with infinity. Will post log later from infinity.

02-12-2013, 00:57	#12 (permalink)
derk No Life Poster Join Date: May 2006 Location: Jamaica Posts: 588 Member: 279555 Status: Offline Thanks Meter: 11	Just need to know how to revive phone with infinity now. Any ideas please?

02-16-2013, 13:12	#14 (permalink)
derk No Life Poster Join Date: May 2006 Location: Jamaica Posts: 588 Member: 279555 Status: Offline Thanks Meter: 11	==== log: [2/18/2012 8:24:16 PM] ==== COM47 [VCP0] selected module v1.38 Device: Sony-Ericsson-Z250i "advanced chip detection" active Action: reset settings Checking data, wait... Boot ... Phone should be Switched OFF ! Press Power button now ! rom version: 0502 Connecting... booting... finalizing... Boot done Check connection ... Check connection done Set baud ... 115200 Set baud done Check hardware ... flash: 89880A00010001:89880A00000000 flash: Intel Intel/Sharp ext [def 00FFx020000 0004x008000] 32Mb software version: 1540-000 software version: ABU-3- Check hardware done Read data ... reading Sony-Ericsson-Z250i_eeprom_calibration-1... file saved: C:\InfinityBox\HModule\Sony-Ericsson-Z250i_eeprom_calibration-1_20120218-202528.80E.bin reading Sony-Ericsson-Z250i_ffs... file saved: C:\InfinityBox\HModule\Sony-Ericsson-Z250i_ffs_20120218-205708.80E.bin Read data done Check data ... warning: Probably wrong model selected, Do you want to continue ? model selection confirmed by user Check data done Write ... flash: 89880A00010001:89880A00000000 Erase: ffs Write done Finished, time used: 35 min 59 sec Remove/Install battery now ! ==== log: [2/18/2012 9:18:19 PM] ==== COM47 [VCP0] selected module v1.38 Device: Sony-Ericsson-Z250i "advanced chip detection" active Action: unlock Checking data, wait... Boot ... Phone should be Switched OFF ! Press Power button now ! rom version: 0502 Connecting... booting... finalizing... Boot done Check connection ... Check connection done Set baud ... 115200 Set baud done Check hardware ... flash: 89880A00010001:89880A00000000 flash: Intel Intel/Sharp ext [def 00FFx020000 0004x008000] 32Mb software version: 1540-000 software version: ABU-3- Check hardware done Read data ... reading Sony-Ericsson-Z250i_eeprom_calibration-1... file saved: C:\InfinityBox\HModule\Sony-Ericsson-Z250i_eeprom_calibration-1_20120218-211948.80E.bin Read data done Check data ... warning: Probably wrong model selected, Do you want to continue ? model selection confirmed by user Check data done Write ... ............. flash: 89880A00010001:89880A00000000 Write: simlock Write done Finished, time used: 2 min 20 sec Remove/Install battery now !