ZTE - G S202 pinouts - GSM-Forum

backbiter17 · 02-18-2011, 17:21

i can not find pinouts for this model
there is micro USB connector for charging/USB
SW says solder pins on board but no picture available?

any idea?

wbr,A

YellowBoss · 02-19-2011, 20:26

Quote:

Originally Posted by backbiter17

i can not find pinouts for this model
there is micro USB connector for charging/USB
SW says solder pins on board but no picture available?

any idea?

wbr,A

Hi,

I think it's need to open phone and Rx/Tx/Gnd test points should be marked at phone PCB.

If you will make this operation, please, make a phone PCB photo and send picture to [email protected] so we will be able to update our pinout database.

Thank you !

backbiter17 · 02-20-2011, 08:24

tnx

on PCS in NO marks
i did manage to cennect & read & unlock phone

photos, files are in your mailbox

wbr,A

DOUHAL · 04-20-2011, 12:42

COM14 [VCP0] selected
module v3.82
Action: "sp-unlock"
unlock method: smart fast
Model: ZTE-S202
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6223:8A05:8A00]...
CPU: MT6223
chip: 0011:630D:000C
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6223,E05
Date: 2000.00.00
Version: 1.0
Version: SPA-ORANGE-P109A13V1.0.1B01
Version: ZTENJ23D_08B_HW
====================
New firmware found (v.3.82, database date: 04.04.2011):
SPA-ORANGE-P109A13V1.0.1B01

This firmware is missing in support area. If this phone is good and working:

- download latest software from support area and try again, probably this firmware already supported in latest software
- make "Read full flash" operation
- send flash backup files to support: [email protected] or upload files to RapidShare AG, Cham, Switzerland or 4shared.com - free file sharing and storage
- include in your e-mail full text from phone back label (phone name etc.)
====================
80 byte(s) read
imei: 35805103165345
connection Ok
116 byte(s) read
reading data...
reading data #2...
building new data...
writing data...
115 byte(s) read
reading data...
972 byte(s) read
building new data...
writing data...
verifying...
verification Ok
done
Finished, time used: 2 min 4 sec
Remove/Install battery now !

especial thnx to HOST-MEDIA - Nador Man

BR,Douhal

sahil2000ind · 04-20-2011, 12:56

CAN U PLS POST THE PINOUTS

WBR
sahil2000ind

DOUHAL · 04-20-2011, 13:03

Quote:

Originally Posted by sahil2000ind

CAN U PLS POST THE PINOUTS

WBR
sahil2000ind

use simple cable URT Brother , without soldring on PCB and bla bla ...

full flash.. and eeprom...and firmware Reading...

BR,Douhal

DOUHAL · 04-20-2011, 13:26

GENERAL INFORMATION

Action: read/check information
Model: ZTE-S202
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
Phone detected, wait...
Hardware version: MT6223, E05
Hardware version: ZTENJ23D_08B_HW
Software version: SPA-ORANGE-P109A13V1
Software date: 2000.00.00
Barcode: 253293806049 10P
imei-1: 358051031653455
Finished, time used: 15 sec
Remove/Install battery now !

DETAILED INFORMATION

COM14 [VCP0] selected
module v3.82
Device: ZTE-S202
Checking data, wait...
advanced flash detection enabled
Action: read/check information
====> Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6223:8A05:8A00]...
CPU: MT6223
chip: 0011:630D:000C
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
====> Initialize ...
detecting chip #00 in region #00...
flash: EC257E25062501:2AEA0000000000
flash: AMD/Fujitsu std [D 0008x002000 007Ex010000 0008x002000] 8Mb
otp offset: 00000000
number of flash chip/regions detected: 01/01
Initialize Done
====> Set baud ...
115200
Set baud Done
====> Initialize bootcode ...
Initialize bootcode Done
====> Check firmware integrity ...
usb bootloader detect...
..
usb bootloader detect (phase #2)...
..
usb bootloader (chip) is absent
searching rom info...
search rom info finished
rom info structure: [standard] type (05)
TCL-ID is absent
====================
New firmware found (v.3.82, database date: 04.04.2011):
ZTENJ23D_08B_PCB01_GSM_MT6223_S00.SPA-ORANGE-P109A13V1_0_1B01.BIN

This firmware is missing in support area. If this phone is good and working:

- download latest software from support area and try again, probably this firmware already supported in latest software
- make "Read full flash" operation
- send flash backup files to support: [email protected] or upload files to RapidShare AG, Cham, Switzerland or 4shared.com - free file sharing and storage
- include in your e-mail full text from phone back label (phone name etc.)
====================
rom info detection finished
rom info ver: 05
sw version: ZTENJ23D_08B_PCB01_GSM_MT6223_S00.SPA-ORANGE-P109A13V1_0_1B01.BIN
project-id: SPA-ORANGE-P109A13V1.0.1B01, 00000000
code offset: 00000000
ffs offset/size [01]: 00700000/00100000
rom info structure: [standard] type (05)
TCL-ID is absent
ffs/eeprom address assigned: 00700000
sec info (detailed) detection...
searching sec info#1...
.
search sec info#1 finished
detecting firmware version...
firmware version: ZTENJ23D_08B_PCB01_GSM_MT6223_S00.SPA-ORANGE-P109A13V1_0_1B01.BIN
detecting firmware build...
...............
firmware date/time: 2010-10-14 14-42
hw1: ZTENJ23D_08B_HW
hw2: 08B_ZTENJ23D_08B
done
detecting product-id...
................................
done
detecting languages...
..............
language parameters detected
detected languages: En Es
Finished, time used: 1 min 5 sec
Remove/Install battery now !

BR,Douhal

DOUHAL · 04-20-2011, 16:12

FULL Flash ZTE-S202_ZTENJ23D_08B_PCB01_GS.Douhal
Firmware ZTE-S202_ZTENJ23D_08B_PCB01_GS.Douhal
Eeprom ZTE-S202_ZTENJ23D_08B_PCB01_GS.Douhal

All Regards,Douhal

hoang · 06-18-2011, 10:50

Can someone give pinout here? or what cable should be used? Via micro-usb connector or via headphone jack?

YellowBoss · 06-18-2011, 12:13

Quote:

Originally Posted by hoang

Can someone give pinout here? or what cable should be used? Via micro-usb connector or via headphone jack?

C:\InfinityBox\pinout\ZTE-G-S202.jpg

hoang · 06-19-2011, 06:58

Quote:

Originally Posted by YellowBoss

C:\InfinityBox\pinout\ZTE-G-S202.jpg

I used InfinitySetupMain_v2.19c.rar but dont see that image in pinout folder, can you attach here?

sahil2000ind · 06-19-2011, 07:13

YES NO JPG FILE FOUND IN PINOUT
PLS UPDATE THE CABLE DATABASE

WBR
sahil2000ind

backbiter17 · 06-19-2011, 08:20

try this one

https://rapidshare.com/files/841827363/DSCN0911.rar

wbr,A

hoang · 06-20-2011, 05:24

Quote:

Originally Posted by backbiter17

try this one

https://rapidshare.com/files/841827363/DSCN0911.rar

wbr,A

It works, thank you very much

Code:

COM2 [VCP0] selected
module  v3.75
Action: "sp-unlock"
unlock method: smart fast
Model: ZTE-S202
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6223:8A05:8A00]...
CPU: MT6223
chip: 0011:57B2:000C
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6223,E05
Date: 2000.00.00
Version: 1.0
Version: VE-VN-P109A13V1.0.0B05
Version: ZTENJ23D_08B_HW
80 byte(s) read
imei: 35805103063267
connection Ok
116 byte(s) read
reading data...
reading data #2...
building new data...
writing data...
115 byte(s) read
reading data...
972 byte(s) read
building new data...
writing data...
verifying...
verification Ok
done
Finished, time used: 13 sec
Remove/Install battery now !

P/S: Supporters should check before posting!

JOJ_SAHA · 06-20-2011, 06:50

thanks..........................

02-18-2011, 17:21	#1 (permalink)
backbiter17 No Life Poster Join Date: Jan 2004 Location: SLOVENIA, LJUBLJANA Age: 55 Posts: 1,155 Member: 48933 Status: Offline Thanks Meter: 104	ZTE - G S202 pinouts i can not find pinouts for this model there is micro USB connector for charging/USB SW says solder pins on board but no picture available? any idea? wbr,A

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
needed pinout for carkit(N61xx)	mobileinfo	Nokia Hardware & Hardware Repair	2	07-23-2013 02:41
8810 pinout??	timitiz	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	06-11-2012 11:10
Please Help, Pinout of N8810	mobileinfo	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	5	06-30-2010 15:53
8810 pinouts for dejan flasher !?!?!?	makona	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	08-03-2001 04:39
8850 pinouts	MDR	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	4	12-30-2000 01:23

02-20-2011, 08:24	#3 (permalink)
backbiter17 No Life Poster Join Date: Jan 2004 Location: SLOVENIA, LJUBLJANA Age: 55 Posts: 1,155 Member: 48933 Status: Offline Thanks Meter: 104	tnx on PCS in NO marks i did manage to cennect & read & unlock phone photos, files are in your mailbox wbr,A

04-20-2011, 12:42	#4 (permalink)
DOUHAL No Life Poster Join Date: Nov 2003 Location: near you ... Posts: 2,947 Member: 43036 Status: Offline Sonork: 100.62160 Thanks Meter: 2,386	COM14 [VCP0] selected module v3.82 Action: "sp-unlock" unlock method: smart fast Model: ZTE-S202 Checking data, wait... Phone should be Switched OFF ! Press and HOLD Power button now ! 19200 autodetect Initializing [6223:8A05:8A00]... CPU: MT6223 chip: 0011:630D:000C status: FF Connecting at 19200, wait... Release Power button now ! Phone detected, wait... Hardware: MT6223,E05 Date: 2000.00.00 Version: 1.0 Version: SPA-ORANGE-P109A13V1.0.1B01 Version: ZTENJ23D_08B_HW ==================== New firmware found (v.3.82, database date: 04.04.2011): SPA-ORANGE-P109A13V1.0.1B01 This firmware is missing in support area. If this phone is good and working: - download latest software from support area and try again, probably this firmware already supported in latest software - make "Read full flash" operation - send flash backup files to support: [email protected] or upload files to RapidShare AG, Cham, Switzerland or 4shared.com - free file sharing and storage - include in your e-mail full text from phone back label (phone name etc.) ==================== 80 byte(s) read imei: 35805103165345 connection Ok 116 byte(s) read reading data... reading data #2... building new data... writing data... 115 byte(s) read reading data... 972 byte(s) read building new data... writing data... verifying... verification Ok done Finished, time used: 2 min 4 sec Remove/Install battery now ! especial thnx to HOST-MEDIA - Nador Man BR,Douhal

04-20-2011, 12:56	#5 (permalink)
sahil2000ind No Life Poster Join Date: Apr 2006 Location: INDIA Age: 38 Posts: 5,596 Member: 269044 Status: Offline Sonork: 100.1590584 Thanks Meter: 3,949	CAN U PLS POST THE PINOUTS WBR sahil2000ind

04-20-2011, 13:26	#7 (permalink)
DOUHAL No Life Poster Join Date: Nov 2003 Location: near you ... Posts: 2,947 Member: 43036 Status: Offline Sonork: 100.62160 Thanks Meter: 2,386	GENERAL INFORMATION Action: read/check information Model: ZTE-S202 Checking data, wait... Phone should be Switched ON ! Connecting, wait... Phone detected, wait... Hardware version: MT6223, E05 Hardware version: ZTENJ23D_08B_HW Software version: SPA-ORANGE-P109A13V1 Software date: 2000.00.00 Barcode: 253293806049 10P imei-1: 358051031653455 Finished, time used: 15 sec Remove/Install battery now ! DETAILED INFORMATION COM14 [VCP0] selected module v3.82 Device: ZTE-S202 Checking data, wait... advanced flash detection enabled Action: read/check information ====> Boot ... Press and HOLD Power button now ! 19200 fixed Connecting, wait... Initializing [6223:8A05:8A00]... CPU: MT6223 chip: 0011:630D:000C status: FF boot packet size: 0400 Release Power button now ! Boot Done ====> Initialize ... detecting chip #00 in region #00... flash: EC257E25062501:2AEA0000000000 flash: AMD/Fujitsu std [D 0008x002000 007Ex010000 0008x002000] 8Mb otp offset: 00000000 number of flash chip/regions detected: 01/01 Initialize Done ====> Set baud ... 115200 Set baud Done ====> Initialize bootcode ... Initialize bootcode Done ====> Check firmware integrity ... usb bootloader detect... .. usb bootloader detect (phase #2)... .. usb bootloader (chip) is absent searching rom info... search rom info finished rom info structure: [standard] type (05) TCL-ID is absent ==================== New firmware found (v.3.82, database date: 04.04.2011): ZTENJ23D_08B_PCB01_GSM_MT6223_S00.SPA-ORANGE-P109A13V1_0_1B01.BIN This firmware is missing in support area. If this phone is good and working: - download latest software from support area and try again, probably this firmware already supported in latest software - make "Read full flash" operation - send flash backup files to support: [email protected] or upload files to RapidShare AG, Cham, Switzerland or 4shared.com - free file sharing and storage - include in your e-mail full text from phone back label (phone name etc.) ==================== rom info detection finished rom info ver: 05 sw version: ZTENJ23D_08B_PCB01_GSM_MT6223_S00.SPA-ORANGE-P109A13V1_0_1B01.BIN project-id: SPA-ORANGE-P109A13V1.0.1B01, 00000000 code offset: 00000000 ffs offset/size [01]: 00700000/00100000 rom info structure: [standard] type (05) TCL-ID is absent ffs/eeprom address assigned: 00700000 sec info (detailed) detection... searching sec info#1... . search sec info#1 finished detecting firmware version... firmware version: ZTENJ23D_08B_PCB01_GSM_MT6223_S00.SPA-ORANGE-P109A13V1_0_1B01.BIN detecting firmware build... ............... firmware date/time: 2010-10-14 14-42 hw1: ZTENJ23D_08B_HW hw2: 08B_ZTENJ23D_08B done detecting product-id... ................................ done detecting languages... .............. language parameters detected detected languages: En Es Finished, time used: 1 min 5 sec Remove/Install battery now ! BR,Douhal

04-20-2011, 16:12	#8 (permalink)
DOUHAL No Life Poster Join Date: Nov 2003 Location: near you ... Posts: 2,947 Member: 43036 Status: Offline Sonork: 100.62160 Thanks Meter: 2,386	FULL Flash ZTE-S202_ZTENJ23D_08B_PCB01_GS.Douhal Firmware ZTE-S202_ZTENJ23D_08B_PCB01_GS.Douhal Eeprom ZTE-S202_ZTENJ23D_08B_PCB01_GS.Douhal All Regards,Douhal

06-18-2011, 10:50	#9 (permalink)
hoang No Life Poster Join Date: Mar 2002 Location: AnyClient Age: 44 Posts: 1,981 Member: 10485 Status: Offline Sonork: 100.66876 Thanks Meter: 396	Can someone give pinout here? or what cable should be used? Via micro-usb connector or via headphone jack?

06-19-2011, 07:13	#12 (permalink)
sahil2000ind No Life Poster Join Date: Apr 2006 Location: INDIA Age: 38 Posts: 5,596 Member: 269044 Status: Offline Sonork: 100.1590584 Thanks Meter: 3,949	YES NO JPG FILE FOUND IN PINOUT PLS UPDATE THE CABLE DATABASE WBR sahil2000ind

06-19-2011, 08:20	#13 (permalink)
backbiter17 No Life Poster Join Date: Jan 2004 Location: SLOVENIA, LJUBLJANA Age: 55 Posts: 1,155 Member: 48933 Status: Offline Thanks Meter: 104	try this one https://rapidshare.com/files/841827363/DSCN0911.rar wbr,A

06-20-2011, 06:50	#15 (permalink)
JOJ_SAHA Banned Join Date: Jan 2008 Location: India Kalkata :) Posts: 102 Member: 668879 Status: Offline Sonork: 100.1603891 Thanks Meter: 55	thanks..........................