Sharp GX29? - GSM-Forum

anjella · 07-04-2006, 15:52

Hi, when will Sharp GX29 be supported?

Thunderstorm · 07-04-2006, 15:57

Select GX25, read unlock code and enter that code like written in sharp manual. Do not perform direct unlock.

WBR ThunderStorm

Quote:

Originally Posted by anjella

Hi, when will Sharp GX29 be supported?

Potvora · 07-12-2006, 18:24

Quote:

Originally Posted by Thunderstorm

Select GX25, read unlock code and enter that code like written in sharp manual. Do not perform direct unlock.

WBR ThunderStorm

For use unlock code orginal SIM card is nesessery. Is problem. But usual format via test mode with Thunderstorm help work for GX29. Checked

jodge · 07-18-2006, 14:30

imei change same as gx25 but tha phone always restarting. Don't panic, just put test(diag) mode again (****) DO NOT RECONNECT THA CABLE!!! (important!!)
and use tha old method, first EEP format then DIAG format. Tha phone imei changed and tha phone work correct
j.

ARDIC · 08-02-2006, 13:25

Quote:

Originally Posted by jodge

imei change same as gx25 but tha phone always restarting. Don't panic, just put test(diag) mode again (****) DO NOT RECONNECT THA CABLE!!! (important!!)
and use tha old method, first EEP format then DIAG format. Tha phone imei changed and tha phone work correct
j.

yes but gx29 not work ? after your methode

jodge · 08-02-2006, 17:45

maybe diferent diag or sw version

Gangster killer · 08-21-2006, 17:57

sharp GX29 Unlock phone > use tha softwere furios sharp GX15 GX30-TM100
Unlocker ''that greet salution'' Dear

detail's here
Phone is now test mode,
You can see **** on phone display.
For finishing unlock follow the next steps:
Press 1 on phone keypad
Press 99
Press right top key
Press 3 for UNLOCK
Or press 1 FOR FACTORY DEFAULT
(phone code will be removed and set to 0000)
press right top key
wait to see on display FORMAT OK
press right key 3 time or more
until phone is off
IS VERY IMPORTANT
TO NOT REMOVE BATTERY
UNTIL ALL THIS ARE DONE!
IF BATTRY IS REMOVED
PHON CAN BE DEAD!

phone 100% unlock

wiliam · 08-24-2006, 13:22

help sharp gx 25 is dead after i connected and phone screen show sw on lcd
and i try to press unlock but i this that unlock is not supported and i see unlock codes on the software and i disconnect phone form cable but if i power phone it display on lcd phone sw so i connect it back to box and press on software (do job) and phone went off that it all if there is help please urgent because costomer ?.

Thunderstorm · 08-24-2006, 13:27

Initialize FFS using GX25 flasher.

WBR ThunderStorm

Quote:

Originally Posted by wiliam

help sharp gx 25 is dead after i connected and phone screen show sw on lcd
and i try to press unlock but i this that unlock is not supported and i see unlock codes on the software and i disconnect phone form cable but if i power phone it display on lcd phone sw so i connect it back to box and press on software (do job) and phone went off that it all if there is help please urgent because costomer ?.

wiliam · 08-24-2006, 20:34

please if there is flash software to flash gx 25 show me where i can download and also flashfile ( Initialize FFS using GX25 flasher) i don't understand that.please help or i have to paid 100usd for the phone gx 25 dead phone

jodge · 08-27-2006, 12:23

i don't understand tha people why don't use tha search button???????????????????????????????????????????? ?????????????????????????????????????????????????? ?????????????????????????????????????????????????? ????????????????????

Gx25 Flasher

wiliam · 09-03-2006, 21:37

bro can some body send me sharp gx 25 flash file to:wphonetei@yahoo.com thanxs

tuhingr · 01-08-2007, 12:52

Quote:

Originally Posted by Gangster killer

sharp GX29 Unlock phone > use tha softwere furios sharp GX15 GX30-TM100
Unlocker ''that greet salution'' Dear

detail's here
Phone is now test mode,
You can see **** on phone display.
For finishing unlock follow the next steps:
Press 1 on phone keypad
Press 99
Press right top key
Press 3 for UNLOCK
Or press 1 FOR FACTORY DEFAULT
(phone code will be removed and set to 0000)
press right top key
wait to see on display FORMAT OK
press right key 3 time or more
until phone is off
IS VERY IMPORTANT
TO NOT REMOVE BATTERY
UNTIL ALL THIS ARE DONE!
IF BATTRY IS REMOVED
PHON CAN BE DEAD!

phone 100% unlock

Worked fine,
Thankx man

07-04-2006, 15:52	#1 (permalink)
anjella Freak Poster Join Date: Jun 2005 Location: 3 Stars And The Sun Posts: 301 Member: 156882 Status: Offline Thanks: 31 Thanked 12 Times in 11 Posts	Sharp GX29? Hi, when will Sharp GX29 be supported?

08-21-2006, 17:57	#7 (permalink)
Gangster killer Registered User Join Date: Mar 2006 Location: pakistan Posts: 86 Member: 243217 Status: Offline Sonork: 1596668 Thanks: 14 Thanked 21 Times in 5 Posts	Sharp GX29 Unlock 100% sharp GX29 Unlock phone > use tha softwere furios sharp GX15 GX30-TM100 Unlocker ''that greet salution'' Dear detail's here Phone is now test mode, You can see **** on phone display. For finishing unlock follow the next steps: Press 1 on phone keypad Press 99 Press right top key Press 3 for UNLOCK Or press 1 FOR FACTORY DEFAULT (phone code will be removed and set to 0000) press right top key wait to see on display FORMAT OK press right key 3 time or more until phone is off IS VERY IMPORTANT TO NOT REMOVE BATTERY UNTIL ALL THIS ARE DONE! IF BATTRY IS REMOVED PHON CAN BE DEAD! phone 100% unlock

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
SHARP GX29 ..... Anyone know ??????	koa	Sharp	51	10-12-2009 12:05
HOW TO REPAIR A DEAD SHARP GX29 or HOW TO FIND THE BEST FILES OF GX29 ???	Eagle7	Sharp	3	06-02-2008 20:42
Sharp GX29 Bluetooth Unlock	espapsa	Sharp	7	03-29-2006 10:57
Sharp GX29 Camera shutter sound	espapsa	Sharp	0	03-27-2006 10:18

07-18-2006, 14:30	#4 (permalink)
jodge No Life Poster Join Date: Apr 2004 Posts: 549 Member: 61389 Status: Offline Thanks: 17 Thanked 127 Times in 61 Posts	imei change same as gx25 but tha phone always restarting. Don't panic, just put test(diag) mode again (****) DO NOT RECONNECT THA CABLE!!! (important!!) and use tha old method, first EEP format then DIAG format. Tha phone imei changed and tha phone work correct j.

08-02-2006, 17:45	#6 (permalink)
jodge No Life Poster Join Date: Apr 2004 Posts: 549 Member: 61389 Status: Offline Thanks: 17 Thanked 127 Times in 61 Posts	maybe diferent diag or sw version

08-24-2006, 13:22	#8 (permalink)
wiliam No Life Poster Join Date: Mar 2006 Posts: 523 Member: 241831 Status: Offline Thanks: 104 Thanked 18 Times in 7 Posts	help sharp gx 25 is dead after i connected and phone screen show sw on lcd and i try to press unlock but i this that unlock is not supported and i see unlock codes on the software and i disconnect phone form cable but if i power phone it display on lcd phone sw so i connect it back to box and press on software (do job) and phone went off that it all if there is help please urgent because costomer ?.

08-24-2006, 20:34	#10 (permalink)
wiliam No Life Poster Join Date: Mar 2006 Posts: 523 Member: 241831 Status: Offline Thanks: 104 Thanked 18 Times in 7 Posts	please if there is flash software to flash gx 25 show me where i can download and also flashfile ( Initialize FFS using GX25 flasher) i don't understand that.please help or i have to paid 100usd for the phone gx 25 dead phone

08-27-2006, 12:23	#11 (permalink)
jodge No Life Poster Join Date: Apr 2004 Posts: 549 Member: 61389 Status: Offline Thanks: 17 Thanked 127 Times in 61 Posts	i don't understand tha people why don't use tha search button???????????????????????????????????????????? ?????????????????????????????????????????????????? ?????????????????????????????????????????????????? ???????????????????? Gx25 Flasher

09-03-2006, 21:37	#12 (permalink)
wiliam No Life Poster Join Date: Mar 2006 Posts: 523 Member: 241831 Status: Offline Thanks: 104 Thanked 18 Times in 7 Posts	bro can some body send me sharp gx 25 flash file to:wphonetei@yahoo.com thanxs