5130 charger not supported - GSM-Forum

danishshah · 05-09-2011, 08:08

need solution of 5130 charger not supported i already replace r100. also remove bsi capas......set no water damage

when insert charger after few secand show charge not support any tested solution ?
thx

danishshah · 05-10-2011, 18:44

wow.........................................

m-fodil · 05-14-2011, 00:05

Try This :

danishshah · 05-14-2011, 06:12

i already change this but still when insert charger after few second show c not supported

milkyctg · 05-14-2011, 07:06

track btemp line and post the result.
br

danishshah · 05-14-2011, 19:13

Quote:

Originally Posted by milkyctg

track btemp line and post the result.
br

can u explain more................

.:houssam:. · 06-24-2011, 15:23

check imie maybe 1234564.....

amit.alag · 08-27-2011, 17:15

write pm use sx4 and sd then check and post

kmssha · 08-27-2011, 22:26

just change betty power ic then look

tariquesiddique · 09-19-2012, 10:56

I have used all three of them
1.change 47k resistor
2.change betty ic
3.check rpl is ok

can you give me more solution???

DOSTI · 12-05-2012, 07:08

Quote:

Originally Posted by tariquesiddique

I have used all three of them
1.change 47k resistor
2.change betty ic
3.check rpl is ok

can you give me more solution???

me also do this bt i dont get resul so pls nay have solution for this.

Ruatakpi · 01-23-2015, 13:14

No need to write pm or rpl. Its 100% H/W fault.

Jump this 2 point near ground fuse.

http://www.mediafire.com/view/8osove...econds_KPI.jpg

05-09-2011, 08:08	#1 (permalink)
danishshah No Life Poster Join Date: May 2006 Location: Pakistan Posts: 889 Member: 277937 Status: Offline Thanks Meter: 48	5130 charger not supported need solution of 5130 charger not supported i already replace r100. also remove bsi capas......set no water damage when insert charger after few secand show charge not support any tested solution ? thx

08-27-2011, 22:26	#9 (permalink)
kmssha Insane Poster Join Date: Apr 2009 Location: dubai Posts: 65 Member: 1017950 Status: Offline Thanks Meter: 7	5130 just change betty power ic then look

01-23-2015, 13:14	#12 (permalink)
Ruatakpi Insane Poster Join Date: Aug 2009 Posts: 90 Member: 1106078 Status: Offline Sonork: Rugga Thanks Meter: 12	Nokia 5130, 2700 charger not support after few seconds (4sec) 1000% solution. No need to write pm or rpl. Its 100% H/W fault. Jump this 2 point near ground fuse. http://www.mediafire.com/view/8osove...econds_KPI.jpg

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
"Deskey Device driver not found" ?? Please help	DivAdonis	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	06-08-2017 13:21
6110 power does not stay on	sc~micro	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	6	08-30-2014 08:14
how to unlock 5130	accelr8	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	4	06-24-2010 17:52
winlock wintesla m2bus do not work	Bigbrothers2000	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	01-26-2000 14:31

05-10-2011, 18:44	#2 (permalink)
danishshah No Life Poster Join Date: May 2006 Location: Pakistan Posts: 889 Member: 277937 Status: Offline Thanks Meter: 48	wow.........................................

05-14-2011, 00:05	#3 (permalink)
m-fodil Freak Poster Join Date: Dec 2008 Location: Algeria Posts: 465 Member: 918393 Status: Offline Thanks Meter: 515	Try This :

05-14-2011, 06:12	#4 (permalink)
danishshah No Life Poster Join Date: May 2006 Location: Pakistan Posts: 889 Member: 277937 Status: Offline Thanks Meter: 48	i already change this but still when insert charger after few second show c not supported

05-14-2011, 07:06	#5 (permalink)
milkyctg No Life Poster Join Date: Mar 2004 Location: cYBER sPACE Posts: 664 Member: 56855 Status: Offline Thanks Meter: 77	track btemp line and post the result. br

06-24-2011, 15:23	#7 (permalink)
.:houssam:. Freak Poster Join Date: May 2009 Location: marocco 'jdida' Age: 31 Posts: 298 Member: 1041022 Status: Offline Thanks Meter: 46	check imie maybe 1234564.....

08-27-2011, 17:15	#8 (permalink)
amit.alag Freak Poster Join Date: Oct 2006 Location: love in your heart Posts: 465 Member: 373527 Status: Offline Thanks Meter: 68	write pm use sx4 and sd then check and post

09-19-2012, 10:56	#10 (permalink)
tariquesiddique Freak Poster Join Date: May 2008 Posts: 80 Member: 763375 Status: Offline Thanks Meter: 16	I have used all three of them 1.change 47k resistor 2.change betty ic 3.check rpl is ok can you give me more solution???