6280 v3.81 --> dead --> v6.10. Finally worked! - GSM-Forum

langnese · 05-08-2007, 20:26

Thought I could share this if someone has similar problems getting the 'Dead phone USB flash' to work:

I started off knowing that I had to do this xtra flash when jumping from 3.81 to 6.10, but was expecting it to be over in a few hours. This was absolutely not the case!
Installed Phoenix 2006_44_6_163 (and Diego 3.09) and used the CA-53 that came with the phone. The flashing seemed to go well for quite a while, until it failed/stopped as expected. Next up, I tried numerous times getting the 'Dead phone USB flash' to work, and spent a lot of hours on it. I also tried upgrading to Phoenix 2007, but still no luck (always using the 'NO CONN.') The result was always 'Failed to send config command to bootcode Error code: 0x84009427' and 'HRESULT 0x84009427'.

The final solution was to install Phoenix 2006_04_6_130 / Diego 3.07 SP2 on another PC! (maybe it could have worked on the 1st one after cleaning and fresh install). Dead phone flashed with 6.10 (using USB cable) straight away!

vule · 05-08-2007, 22:14

No, it won't work straight away 3.81 to 6.10... I don't know why, but first time flashing completes and phone dead... Then after dead phone usb flashing with very same 6.10, and very same phoenix, works ok... Funny, but i have done more than 10pcs same way...

Best regards

adnanali · 05-08-2007, 22:17

yes upto 4.--- version works nicely and ok i also tested on 39 sets

gprsman · 05-27-2007, 00:10

Hello to all

I have made format file system in mine 6280 with phonenix for error, now black screen is ignited with logo nokia white man then and it is extinguished. With phoenix selecting dead usb flashing and cable it always originates them usb you say that I succeed to make full flash from extinguished? I have tried without telephone and I see that it says me to press the key on, is this the procedure? the flashing it is made to extinguished telephone pressing the key on the demand?

thanks

renegade · 05-27-2007, 00:54

Quote:

Originally Posted by gprsman

Hello to all

I have made format file system in mine 6280 with phonenix for error, now black screen is ignited with logo nokia white man then and it is extinguished. With phoenix selecting dead usb flashing and cable it always originates them usb you say that I succeed to make full flash from extinguished? I have tried without telephone and I see that it says me to press the key on, is this the procedure? the flashing it is made to extinguished telephone pressing the key on the demand?

thanks

Yes you got it right, press phone's power button when Phoenix demand that and in about 5-6 min it should be ready and your phone is working again
But, dont play anymore with other function in cracked version of Phoenix, it's working just for flashing BB5 and not all models are supported dead usb,
lucky you 6280 is supported

Un|ocker · 05-27-2007, 03:13

Ive had a 6280 on my desk for the last 1.5 years cos it was dead. Everytime a new firmware version was released, I'd try and make it come alive again, but until 6.10 was released, it never worked.

I flashed it with latest version (6.10), from 3.81 2 days ago, and phone is now alive. I used Dead USB fashing and JAF box.

Ashwani Gaur · 05-27-2007, 05:43

can someone share which phone models are supported in this as DEAD PHONE FLASHING.

TIA
AshwaniGaur

Lhick · 05-27-2007, 05:51

http:///vbb/showth...light=dead+usb

Jr Telecom · 05-27-2007, 09:04

Also u can dead mode flash by Mtb/Phonix soft.using DKU-2.

renegade · 05-27-2007, 14:42

Quote:

Originally Posted by Ashwani Gaur

can someone share which phone models are supported in this as DEAD PHONE FLASHING.

TIA
AshwaniGaur

Well, i can tell wich models are not supported dead usb till now 6630, 6680, E70, N70, N71, N72, N80, N90, N91, the rest of BB5 should be working with Phoenix, but i've tested only 6270 and 6280.
So, if anyone have succesfully revived other models by usb with Phoenix, Jaf or MT, post here and let us know.

B.R

05-08-2007, 20:26	#1 (permalink)
langnese Junior Member Join Date: May 2007 Posts: 1 Member: 503625 Status: Offline Thanks Meter: 0	6280 v3.81 --> dead --> v6.10. Finally worked! Thought I could share this if someone has similar problems getting the 'Dead phone USB flash' to work: I started off knowing that I had to do this xtra flash when jumping from 3.81 to 6.10, but was expecting it to be over in a few hours. This was absolutely not the case! Installed Phoenix 2006_44_6_163 (and Diego 3.09) and used the CA-53 that came with the phone. The flashing seemed to go well for quite a while, until it failed/stopped as expected. Next up, I tried numerous times getting the 'Dead phone USB flash' to work, and spent a lot of hours on it. I also tried upgrading to Phoenix 2007, but still no luck (always using the 'NO CONN.') The result was always 'Failed to send config command to bootcode Error code: 0x84009427' and 'HRESULT 0x84009427'. The final solution was to install Phoenix 2006_04_6_130 / Diego 3.07 SP2 on another PC! (maybe it could have worked on the 1st one after cleaning and fresh install). Dead phone flashed with 6.10 (using USB cable) straight away!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Flash 6280 v3.81 and retain Orange Settings?	hob	Nokia Base Band 5 ( BB-5 )	0	08-17-2006 00:31
6280 V3.81 128k Cnt	andre128	Twisterflasher	0	06-28-2006 03:59
wanted 6280 V3.81 (090506)	ahmed	Nokia Base Band 5 ( BB-5 )	10	06-26-2006 12:21
Nokia 6280 - v3.81	mobilextreme	MT-BOX	19	06-20-2006 12:47

05-08-2007, 22:14	#2 (permalink)
vule No Life Poster Join Date: Apr 2002 Location: Radiometer Medical ApSBrønshøj Age: 51 Posts: 721 Member: 10854 Status: Offline Sonork: 1578988 Thanks Meter: 3	No, it won't work straight away 3.81 to 6.10... I don't know why, but first time flashing completes and phone dead... Then after dead phone usb flashing with very same 6.10, and very same phoenix, works ok... Funny, but i have done more than 10pcs same way... Best regards

05-08-2007, 22:17	#3 (permalink)
adnanali No Life Poster Join Date: Dec 2005 Location: Gujjar AJK Posts: 2,074 Member: 207308 Status: Offline Thanks Meter: 471	yes upto 4.--- version works nicely and ok i also tested on 39 sets

05-27-2007, 00:10	#4 (permalink)
gprsman No Life Poster Join Date: Jan 2006 Location: HWKBOX,MX-KEY,CYCLONE SL3 ;-) Posts: 1,273 Member: 217461 Status: Offline Thanks Meter: 150	Hello to all I have made format file system in mine 6280 with phonenix for error, now black screen is ignited with logo nokia white man then and it is extinguished. With phoenix selecting dead usb flashing and cable it always originates them usb you say that I succeed to make full flash from extinguished? I have tried without telephone and I see that it says me to press the key on, is this the procedure? the flashing it is made to extinguished telephone pressing the key on the demand? thanks

05-27-2007, 03:13	#6 (permalink)
Un\|ocker Freak Poster Join Date: May 2007 Posts: 144 Member: 511890 Status: Offline Thanks Meter: 7	Ive had a 6280 on my desk for the last 1.5 years cos it was dead. Everytime a new firmware version was released, I'd try and make it come alive again, but until 6.10 was released, it never worked. I flashed it with latest version (6.10), from 3.81 2 days ago, and phone is now alive. I used Dead USB fashing and JAF box.

05-27-2007, 05:43	#7 (permalink)
Ashwani Gaur No Life Poster Join Date: Dec 2000 Location: CHANDIGARH - INDIA Age: 59 Posts: 2,006 Member: 2822 Status: Offline Thanks Meter: 152	can someone share which phone models are supported in this as DEAD PHONE FLASHING. TIA AshwaniGaur

05-27-2007, 05:51	#8 (permalink)
Lhick No Life Poster Join Date: Aug 2006 Location: InsideOut Posts: 5,657 Member: 333359 Status: Offline Thanks Meter: 91	http:///vbb/showth...light=dead+usb

05-27-2007, 09:04	#9 (permalink)
Jr Telecom No Life Poster Join Date: Dec 2006 Location: Jr Telecom™ Posts: 1,735 Member: 409725 Status: Offline Sonork: 100.1581478 Thanks Meter: 797	Also u can dead mode flash by Mtb/Phonix soft.using DKU-2.