6500S cannot be unlock

[deywet]

the phone is fully working

need to be unlock only

ive tried ufc v2 v3 and v4 but always says this problem

tried on atf, mxkey, ufs, mt, cyclone but all says the same problem

if you tick info the gadget read it but in bus check it cannot

i also tried using wall charger while unlocking but still fails

Reading Simlock info ...
Imei net: 353547026189152
Version: SIMLOCK SERVER
Provider: Hutchison 3G Australia Pty. Ltd. , Country: Australia
Counter: 0/3, 0/10

CONFIG_DATA: 5050600042465540
PROFILE_BITS: 8000000000000002

BLOCK1: 1=CLOSED(MCCMNC), DATA=50506F [Australia-Hutchison 3G Australia Pty. Ltd. ]
BLOCK2: 1=CLOSED(MCCMNC), DATA=50599F [Australia-One.Tel GSM 1800 Pty. Ltd. ]
BLOCK3: 1=CLOSED(MCCMNC), DATA=00101FBackup already exist.
MXKEY Serial: [FT SCR2000 0] - C0809C1C
Using device: UFS_USB V2.8 (c) SarasSoft 2007.
Driver: UFS2XX, ver: 3.6.0.0, NTMP ver: 2.6.0.0
Module ver: 1.0.0.16978(13-05-2011), Library ver: 1.0.0.10071(13-05-2011)

Product: V 04.81 22-11-07 RM-240 (c) Nokia

Boot error: 02 FF 72 00
- Repeat the procedure. Sometimes it is a matter of temporary communication problem or similar.
- Check that all used cable are solid without any visible damage and have good contact. If possible, try with other cables.
- On rare occasions phone might be damaged or dead. So, if possible, try with another phone.


what could be the problem?

any suggestions