6500s, Displays Nokia, then goes OFF - GSM-Forum

07heaven · 08-12-2008, 19:32

Have got two, 6500s, both have had water damage, and both have the same symptoms.

They power on, display Nokia for 10secs, then screen goes white, then powers off!

Has anyone else come across this and fix them?

Have flashed them both, and both flash. but problem still there!
And also have a fully working one, swapped the boards, problem still there!
So the issue is nothing to do with Flex or anything in the top half of the phone

Regards!

alito315744 · 08-12-2008, 20:40

Clean the boards by alcohol then dry them using hot air (low heat) and try

zenadia · 08-12-2008, 21:13

I had 1 old one which I have flashed with the latest version. Phone was ok. But now have 2 more phones same problem. Done flash. But no luck. I waiting for new version flash to come. Cheers....Zena

ratrading · 08-12-2008, 21:15

use petrol

.....

ps just askin if you tried changing lcd?

07heaven · 08-13-2008, 00:17

Quote:

Originally Posted by ratrading

use petrol

.....

ps just askin if you tried changing lcd?

Super?
Or regular unleaded?

I've used the full top half from a working phone.
So its not LCD and not Ribbon

BadUnlockers · 08-13-2008, 13:40

I've come across the same probs several time... after flash fone still behave the same way, I think it has to do with the HW.

tunjay-gsm · 08-13-2008, 13:49

pls fhirs i thinking change 3 lcd cristal ic nexs to maind bord flaexs cable socet 3 ic if not flash fon

eiji 1198 · 08-13-2008, 19:25

Quote:

Originally Posted by tunjay-gsm

pls fhirs i thinking change 3 lcd cristal ic nexs to maind bord flaexs cable socet 3 ic if not flash fon

brother the 3 pcs is lcd ic and keypad filter it u change is also same i also have one pcs 6500 this problem i first time change lcd full set inner(ribbon) that also same and rehot that uem

alito315744 · 08-13-2008, 21:23

check your imei is it ok or not

07heaven · 08-14-2008, 00:06

Quote:

Originally Posted by alito315744

check your imei is it ok or not

Phone don't come on fully enough to check IMEI!

can check label and IMEI on label looks fine

zulu land · 08-14-2008, 00:26

read through mt/jaf...

07heaven · 08-14-2008, 00:33

Can't get local or test mode from the phones, to be able to read them!!

'CHECK's fine on UFS showing no errors

debeliamark · 08-14-2008, 11:15

Quote:

Originally Posted by 07heaven

Can't get local or test mode from the phones, to be able to read them!!

'CHECK's fine on UFS showing no errors

Try to reflash phone to SW 7.12 ... ( rm240_CareDP_19.0_GLOBAL.exe + 19.1 + 19.2 ) if this not help - resolder / change AVILMA IC ( N2200 ) and try flashing again...

nofear197979 · 09-13-2008, 09:21

where it is the AVILMA IC ( N2200 ?????????????

stanner_austin · 09-13-2008, 09:25

Quote:

Originally Posted by nofear197979

where it is the AVILMA IC ( N2200 ?????????????

this problem can be solve with 64mb erase file.
but u will lost sim lock data and npc imei data.

in case if you have ub you can make backup of both ..
jaf support only npc and some other certificate backup only.

ub can do sim lock and npc and other data backup..

so step are
use 64mb erase flash
phone will be dead after this
flash phone with any version
now restore correct rpl backup
or
restore calculated rpl

08-12-2008, 19:32	#1 (permalink)
07heaven No Life Poster Join Date: Mar 2004 Location: Midlands, UK Posts: 782 Member: 57937 Status: Offline Thanks Meter: 34	6500s, Displays Nokia, then goes OFF Have got two, 6500s, both have had water damage, and both have the same symptoms. They power on, display Nokia for 10secs, then screen goes white, then powers off! Has anyone else come across this and fix them? Have flashed them both, and both flash. but problem still there! And also have a fully working one, swapped the boards, problem still there! So the issue is nothing to do with Flex or anything in the top half of the phone Regards!

08-12-2008, 21:15	#4 (permalink)
ratrading Freak Poster Join Date: Oct 2005 Posts: 105 Member: 194595 Status: Offline Thanks Meter: 5	use petrol..... ps just askin if you tried changing lcd?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
3100c blinking Nokia and then goes OFF	shaka	Infinity-Box	2	03-15-2010 16:38
try to unlock and then goes off	gbada	Mitsubishi	0	10-30-2004 10:20
MC 9xx shows SAGEM, Then Goes Off	dannyogolo	Infineon C16X M51 & ARM7 M52 BASED	4	10-30-2003 21:19
922 only on for 2 sec. then goes off	CellM@n	Infineon C16X M51 & ARM7 M52 BASED	4	12-06-2001 12:22

08-12-2008, 20:40	#2 (permalink)
alito315744 Registered User Join Date: Dec 2004 Location: Lebanon Age: 45 Posts: 419 Member: 101744 Status: Offline Thanks Meter: 69	Clean the boards by alcohol then dry them using hot air (low heat) and try

08-12-2008, 21:13	#3 (permalink)
zenadia No Life Poster Join Date: Jul 2006 Location: London Posts: 514 Member: 315127 Status: Offline Thanks Meter: 6	I had 1 old one which I have flashed with the latest version. Phone was ok. But now have 2 more phones same problem. Done flash. But no luck. I waiting for new version flash to come. Cheers....Zena

08-13-2008, 13:40	#6 (permalink)
BadUnlockers No Life Poster Join Date: Nov 2003 Age: 39 Posts: 1,463 Member: 44610 Status: Offline Thanks Meter: 50	I've come across the same probs several time... after flash fone still behave the same way, I think it has to do with the HW.

08-13-2008, 13:49	#7 (permalink)
tunjay-gsm No Life Poster Join Date: Aug 2006 Location: melbourne australia thailand Age: 48 Posts: 746 Member: 338192 Status: Offline Sonork: 1678261 Thanks Meter: 154	pls fhirs i thinking change 3 lcd cristal ic nexs to maind bord flaexs cable socet 3 ic if not flash fon

08-13-2008, 21:23	#9 (permalink)
alito315744 Registered User Join Date: Dec 2004 Location: Lebanon Age: 45 Posts: 419 Member: 101744 Status: Offline Thanks Meter: 69	check your imei is it ok or not

08-14-2008, 00:26	#11 (permalink)
zulu land Freak Poster Join Date: Apr 2008 Posts: 406 Member: 745071 Status: Offline Thanks Meter: 37	read through mt/jaf...

08-14-2008, 00:33	#12 (permalink)
07heaven No Life Poster Join Date: Mar 2004 Location: Midlands, UK Posts: 782 Member: 57937 Status: Offline Thanks Meter: 34	Can't get local or test mode from the phones, to be able to read them!! 'CHECK's fine on UFS showing no errors

09-13-2008, 09:21	#14 (permalink)
nofear197979 No Life Poster Join Date: Jun 2004 Location: lebanon Age: 45 Posts: 1,755 Member: 68311 Status: Offline Thanks Meter: 34	where it is the AVILMA IC ( N2200 ?????????????