BB5 Unlocker Connection Problem DKU-5

[taofikl]

thanks for the directcom setup

[RsT]

Couldn't find my DKU 5 cable from yr's ago, so went out and bought a cheap **** CA42 cable (non official). They told me this is the same cable as the DKU 5 anyway. Not sure that it is, but it works just fine

It just unlocked my 6680 and N70 without any major problems.

If you connect the phone up, hit read, and that bit's ok.

Hit make log, if the phone reboots and you get an error, clear that error, then wait till the phone has just booted and hit make log again.

This works for me.

[pufiks]

hi,i also have ca42 cable not original i think,and drivers dont work...maybie i dont know something,but this cable works for me how usb cable,how to create com port.can you help? can somebody send me working drivers,i tried some drivers they dont work...

[LAD]

if you can't get the DKU-5 or CA-42 cable to work, and u have some soldering skills, make this:

Serial Com port to Nokia Pop Port Cable (for BB5 unlock) - Tested

best of all...no drivers needed, just a PC/Laptop with a COM port!! (and some soldering skills)

Enjoy!

[djloyd]

Originally Posted by Kevbodian

1. connect UFS to computer
2. open directCOM.
3. setup COMPORT in directCOM and click CONNECT
4. open 'C:\bb5unlocker\logs\bb5_unlocker.cfg'
- change "comX:" to "comM:" where M = directCOM port
5. open bb5 unlocker in 'C:\bb5_unlocker\bb5logunlocker.exe'
6. click READ PHONE and wait
7. click MAKE LOG and wait
8. click READ PHONE (make sure SP area not corrupted, if corrupted click WR BACKUP and READ PHONE until it doesnt say corrupted)
9. click SP UNLOCK. if you get the message about "psw" needed, close BB5_unlocker and open BB5_Calc, you should get message "*****DONE*****"
10. open BB5_unlocker, click SP UNLOCK, wait for message.

sir What cable shoud i use?? the 6680 rj 45 or the dku 5

[cairnquay]

If you have ufs and com emulator then you can use 6680 RJ45 cable

otherwise you need to use dku5 usb cable. Some types work and some types dont

[Buttsb]

any solution for sp area corrupted
is it use without hwk
?

[głodny]

my english is bad so

i have problem : i have got NK 6630 Ver. 3.45.113 04-01-05 RM-1 he has got a simlock for english T-mobile i download your program and connected to cable DKU-5 and press "Read Phone" and program read it, but i press "Make Log" and have got this masage please help ;[




[IMG][/IMG]

[zul_kr]

this is what ive done..

1.set the port number
2.install.bat
3.read phone..done
4.make log..( cannot make log for this phone)

now the phone display invalid sim even i puit in vodafone sim.. plz help..
i have done write backup many times but still cannot..plz help..

[EBRJO]

maybe phone is 4 locks already, that why it say invalid sim or even vodafone sim... maybe you'll wait for the update of the bb5 unlocker that can unlock 4 locks...

[maswiera]

http://www.****************/nokia/DirectCOMsetup.zip

matur nuwun mas bos

[pakstar]

Originally Posted by Kevbodian

1. connect UFS to computer
2. open directCOM.
3. setup COMPORT in directCOM and click CONNECT
4. open 'C:\bb5unlocker\logs\bb5_unlocker.cfg'
- change "comX:" to "comM:" where M = directCOM port
5. open bb5 unlocker in 'C:\bb5_unlocker\bb5logunlocker.exe'
6. click READ PHONE and wait
7. click MAKE LOG and wait
8. click READ PHONE (make sure SP area not corrupted, if corrupted click WR BACKUP and READ PHONE until it doesnt say corrupted)
9. click SP UNLOCK. if you get the message about "psw" needed, close BB5_unlocker and open BB5_Calc, you should get message "*****DONE*****"
10. open BB5_unlocker, click SP UNLOCK, wait for message.

many thanks for your helpful instructions. managed to unlocekd 6630 using DKU-5 cable

[babaki]

HI everyone...

I have tried that circuit and with a dke-2 usb cable it did not work. Ive also used a digital camera cable the same as dke-2 and it dd not work they have straight through wiring for all 4 pins...the camera cable works with nokia pcsuite and the transfer is slightly quicker though, but with this custom circuit and dijan bb5 unlocker I get the bad connection error...

tried even two different com port serial cables and still no luck...

I have a Nokia 6300 and trying to unlock it...

[benq2]

Nokia 6300 don't work with Dejan BB5 unlocker
BR,

[poochone]

No don`t work with DEJAN BB% uunlocker