Improve your jaf hardware 4 new phones!!! - GSM-Forum

edcentec · 04-27-2009, 09:16

I got some problem(unlock and flash) in new phones high consumiption like N95, N95 8gb, N81, 5610 etc, etc.
These phones have a normal high consumiption on start.
Always shuting down when try go to local or test mode after flash or unlocking, generating error on process and dead phone sometimes.
I solved low power of jaf easily and I want to share it 4 all users.
Just follow my pic.
rgds

jaleo · 05-05-2009, 20:54

Did you mean 0,47Ohms? I will try

I can't put n95, n95-8g in local mode even without camera (tested with x-fbus and external 9v battery). Thanks I hope will be safe.

khm050 · 05-05-2009, 21:17

how can i get this resistor

moulnisky · 05-06-2009, 00:41

I've no problem using UFS...
But I've always been thinking about connecting the battery VPP to a proper power supply and use the vpp-bat of the box only to activate the PSU (Using a relais as sample).
No more problems of local...

Anyway is easy to check if you have power problem:
using an UFC connect just VPP,GND and BSI: when you switch on the mobile it must go in local... if it switch off itself you have power problems.. if is starts normally is a bsi resistor problem..

BR

Alex

10xs4asking · 05-06-2009, 00:51

Quote:

Originally Posted by moulnisky

I've no problem using UFS...
But I've always been thinking about connecting the battery VPP to a proper power supply and use the vpp-bat of the box only to activate the PSU (Using a relais as sample).
No more problems of local...

Anyway is easy to check if you have power problem:
using an UFC connect just VPP,GND and BSI: when you switch on the mobile it must go in local. if it switch off itself you have power problems.. if is starts normally is a bsi resistor problem..

BR

Alex

I agreed I think the problem can be handle with proper BSI resister and VPP voltage without tempering with the JAF BOX.

===============+++++++++++++++++++++++============ =====

But, everyone to its own solution if it works why knock it. But, if any thing I would put a switch on the parallel resister so I would use it only when need it..

summer_20xx · 05-22-2009, 22:55

Quote:

Originally Posted by edcentec

I got some problem(unlock and flash) in new phones high consumiption like N95, N95 8gb, N81, 5610 etc, etc.
These phones have a normal high consumiption on start.
Always shuting down when try go to local or test mode after flash or unlocking, generating error on process and dead phone sometimes.
I solved low power of jaf easily and I want to share it 4 all users.
Just follow my pic.
rgds

do u mean i should add 0.47hom parallel with R1?

Nuno106 · 05-29-2009, 17:10

Yes, the resistance is in parallel with the exist one, like the foto.
Did someone test it in N81 for example?

Thanks,
Nuno

Quote:

Originally Posted by summer_20xx

do u mean i should add 0.47hom parallel with R1?

maurocentec · 05-29-2009, 21:12

N81 tested for me 100%

thanks brother

dragosgsm · 05-29-2009, 22:04

Quote:

Originally Posted by edcentec

I got some problem(unlock and flash) in new phones high consumiption like N95, N95 8gb, N81, 5610 etc, etc.
These phones have a normal high consumiption on start.
Always shuting down when try go to local or test mode after flash or unlocking, generating error on process and dead phone sometimes.
I solved low power of jaf easily and I want to share it 4 all users.
Just follow my pic.
rgds

0,47R -what does it means???
I think that shoud be written: R=0,47Ohms; R=0,47Kohms or R=0,47Mohms !!!
Of corse opening the box will clear this detail by measuring old rezistance but ...

Burebista · 05-29-2009, 22:16

Quote:

Originally Posted by dragosgsm

0,47R -what does it means???
I think that shoud be written: R=0,47Ohms; R=0,47Kohms or R=0,47Mohms !!!
Of corse opening the box will clear this detail by measuring old rezistance but ...

Ce anume nu intelegi ca eu asta nu pricep?
In electronica se scrie 0,47R(R este sinonim cu omega sa zic asa;omega este litera greceasca ce se utilizeaza pt unitatea de masura a rezistentei electrice care se cheama ohm).Se poate scrie si 0,47Kohmi dar mai corect este 470Kohmi dar deviem de la subiect.

I've just replace that rezistor with a 0.47R and all phone works OK on this value;tested on N95 simple and 8G and N81.

mazmaz1 · 05-29-2009, 22:27

Quote:

0,47R -what does it means???

this is 0.47 ohm or near 1/2 ohm

djdansmart · 05-29-2009, 22:30

Quote:

Originally Posted by Burebista

Ce anume nu intelegi ca eu asta nu pricep?
In electronica se scrie 0,47R(R este sinonim cu omega sa zic asa;omega este litera greceasca ce se utilizeaza pt unitatea de masura a rezistentei electrice care se cheama ohm).Se poate scrie si 0,47Kohmi dar mai corect este 470Kohmi dar deviem de la subiect.

I've just replace that rezistor with a 0.47R and all phone works OK on this value;tested on N95 simple and 8G and N81.

@Burebista

0,47 Kohmi=470 Ohmi not Kohmi!!!

GsmUniversal · 05-29-2009, 22:42

how much person tried this ?
can anyone tell me is it tested working or not..

toto05 · 05-30-2009, 01:53

but solution is here : http://forum.gsmhosting.com/vbb/show...19&postcount=1

yuval44 · 05-30-2009, 09:57

good job men///////////////

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Improve your jaf hardware 4 new phones!!!!	edcentec	BB5 No TP By Jafsupport	3	05-15-2009 15:11
How to repare or improve your phone signals	andalusy	Nokia Hardware & Hardware Repair	0	05-31-2007 13:49
where we can download flsh files 4 new phones?	CLIFFORD25502	Smart-Clip	0	03-10-2005 08:05

05-05-2009, 20:54	#2 (permalink)
jaleo Insane Poster Join Date: May 2003 Location: Russia Posts: 61 Member: 29370 Status: Offline Thanks Meter: 2	Did you mean 0,47Ohms? I will try I can't put n95, n95-8g in local mode even without camera (tested with x-fbus and external 9v battery). Thanks I hope will be safe.

05-05-2009, 21:17	#3 (permalink)
khm050 Freak Poster Join Date: Apr 2005 Location: MX-KEY is the BEST NOKIA TOOL Age: 44 Posts: 443 Member: 133201 Status: Offline Thanks Meter: 74	how can i get this resistor

05-06-2009, 00:41	#4 (permalink)
moulnisky No Life Poster Join Date: Jan 2009 Location: England Age: 59 Posts: 17,681 Member: 947561 Status: Offline Thanks Meter: 14,053	I've no problem using UFS... But I've always been thinking about connecting the battery VPP to a proper power supply and use the vpp-bat of the box only to activate the PSU (Using a relais as sample). No more problems of local... Anyway is easy to check if you have power problem: using an UFC connect just VPP,GND and BSI: when you switch on the mobile it must go in local... if it switch off itself you have power problems.. if is starts normally is a bsi resistor problem.. BR Alex

05-29-2009, 21:12	#8 (permalink)
maurocentec Freak Poster Join Date: Sep 2004 Location: Brazil Age: 43 Posts: 361 Member: 81894 Status: Offline Thanks Meter: 29	N81 tested for me 100% thanks brother

05-29-2009, 22:42	#13 (permalink)
GsmUniversal No Life Poster Join Date: Dec 2007 Location: Skype , Sonork Posts: 4,857 Member: 649528 Status: Offline Sonork: 100.1590443 Thanks Meter: 6,958	how much person tried this ? can anyone tell me is it tested working or not..

05-30-2009, 01:53	#14 (permalink)
toto05 No Life Poster Join Date: May 2005 Location: in my office Posts: 1,117 Member: 145076 Status: Offline Thanks Meter: 224	but solution is here : http://forum.gsmhosting.com/vbb/show...19&postcount=1

05-30-2009, 09:57	#15 (permalink)
yuval44 Freak Poster Join Date: Feb 2005 Location: israel Age: 48 Posts: 422 Member: 116078 Status: Offline Thanks Meter: 17	good job men///////////////