For masters only:- need detailed information about these problems - GSM-Forum

manishavar15 · 04-15-2011, 16:25

For masters only:- need detailed information about these problems Master
i have some difficulties during repair these kind of problems
1]lcd blue/white/blank (incoming outgoing ok)
answer:- hardware fault
resion:- lcd/lcd connector/fpc/lcd ic/cpu
but dont know how to identify when

2]lcd blue/white/blank (no incoming outgoing )

3]when press power key only blue/white lcd

4]when press power key only vibrates

5]when press power key show nokia logo than battery low sign finnaly white screen

6]after nokia logo blue/white lcd

7]after nokia logo set turn off

8]hang on nokia logo with light

9]hang on nokia logo without light

10]set on with white light after some time dark/blue lcd

i search lots of threads and post but cant understand because of my poor english knowledge.
Plz give me detailed info about above problems
i have all hardware repairing kit and
ufs
mx-key
cyclon
atf (activated just bought)

this is my first faq list
next list is about errors while doing software works
*flash device not supported
*loader not responding
*asic not supported
*sending loader failed and many more
i will do search forum about these problems untill you reply my first faq answers
hope i will search better this time
thanks in advance

AND CAN YOU PLEASE ADVISE ME GOOD QUALITY CABLES NAME FOR FLASHING AND UNLOCKING WORK
I HAVE UFS 150 CABLE SET
I JUST WANT TO MAKE SURE NO LOCAL/TEST MODE PROBLEM BECAUSE OF BAD CABLE.

rahulk99k · 04-16-2011, 07:57

Quote:

Originally Posted by manishavar15

For masters only:- need detailed information about these problems Master
i have some difficulties during repair these kind of problems
1]lcd blue/white/blank (incoming outgoing ok)
answer:- hardware fault
resion:- lcd/lcd connector/fpc/lcd ic/cpu
but dont know how to identify when

2]lcd blue/white/blank (no incoming outgoing )

3]when press power key only blue/white lcd

4]when press power key only vibrates

5]when press power key show nokia logo than battery low sign finnaly white screen

6]after nokia logo blue/white lcd

7]after nokia logo set turn off

8]hang on nokia logo with light

9]hang on nokia logo without light

10]set on with white light after some time dark/blue lcd

i search lots of threads and post but cant understand because of my poor english knowledge.
Plz give me detailed info about above problems
i have all hardware repairing kit and
ufs
mx-key
cyclon
atf (activated just bought)

this is my first faq list
next list is about errors while doing software works
*flash device not supported
*loader not responding
*asic not supported
*sending loader failed and many more
i will do search forum about these problems untill you reply my first faq answers
hope i will search better this time
thanks in advance

AND CAN YOU PLEASE ADVISE ME GOOD QUALITY CABLES NAME FOR FLASHING AND UNLOCKING WORK
I HAVE UFS 150 CABLE SET
I JUST WANT TO MAKE SURE NO LOCAL/TEST MODE PROBLEM BECAUSE OF BAD CABLE.

ask to nokia technicial department...they can give answer 4 u.

nadeem6677 · 04-16-2011, 09:21

No one is master every one learns during entire of his life.

so ,
first you search for masters then ask them for lot of your questions .

also mention the models of phone with each question.

04-15-2011, 16:25	#1 (permalink)
manishavar15 No Life Poster Join Date: Jan 2008 Location: india Posts: 518 Member: 687718 Status: Offline Sonork: 100.1603913 Thanks Meter: 121	For masters only:- need detailed information about these problems For masters only:- need detailed information about these problems Master i have some difficulties during repair these kind of problems 1]lcd blue/white/blank (incoming outgoing ok) answer:- hardware fault resion:- lcd/lcd connector/fpc/lcd ic/cpu but dont know how to identify when 2]lcd blue/white/blank (no incoming outgoing ) 3]when press power key only blue/white lcd 4]when press power key only vibrates 5]when press power key show nokia logo than battery low sign finnaly white screen 6]after nokia logo blue/white lcd 7]after nokia logo set turn off 8]hang on nokia logo with light 9]hang on nokia logo without light 10]set on with white light after some time dark/blue lcd i search lots of threads and post but cant understand because of my poor english knowledge. Plz give me detailed info about above problems i have all hardware repairing kit and ufs mx-key cyclon atf (activated just bought) this is my first faq list next list is about errors while doing software works flash device not supported loader not responding asic not supported sending loader failed and many more i will do search forum about these problems untill you reply my first faq answers hope i will search better this time thanks in advance AND CAN YOU PLEASE ADVISE ME GOOD QUALITY CABLES NAME FOR FLASHING AND UNLOCKING WORK I HAVE UFS 150 CABLE SET I JUST WANT TO MAKE SURE NO LOCAL/TEST MODE PROBLEM BECAUSE OF BAD CABLE.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Seeking for flash nokia 5110 old version (3 version) can exchange for new	Tomas	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	10-14-2017 19:29
need ericsson 88 cable	migdamas	Old Ericsson Phones & Sony Phones	2	03-24-2017 16:24
Need software upgrade for Nokia 5110	ptkrf	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	30	02-24-2016 10:21
needed pinout for carkit(N61xx)	mobileinfo	Nokia Hardware & Hardware Repair	2	07-23-2013 02:41
need eeprom photo????	mobileinfo	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	05-26-1999 11:35

04-16-2011, 09:21	#3 (permalink)
nadeem6677 Freak Poster Join Date: Mar 2010 Location: P A K I S T A N Posts: 423 Member: 1252644 Status: Offline Sonork: 100.1602567 Thanks Meter: 47	No one is master every one learns during entire of his life. so , first you search for masters then ask them for lot of your questions . also mention the models of phone with each question.