.:NEW:.Phoenix Service Software 2011.38.003.46817 Cracked

[senfour]

download links WUPLOAD OR FILESONIC

1. CHANGE HISTORY
Version 1: 23.09.2011 Initial version 
2. INTRODUCTION
New version of Phoenix service software is available. This  multi-protocol service software supports Nokia CDMA, GSM, TDMA, and  WCDMA products.


Main component versions in the release:
• DK2 Driver Version 07.14.0.25 
• Nokia Connectivity Cable USB Driver Version 7.1.45.0 
• Flash Update Package 2011.34.000
• FLS-x Drivers Version 2.09.28
• FUSE Connection Manager v 2011.34.1
3. MAIN CHANGES & ERROR CORRECTIONS FROM PREVIOUS VERSION 2011.24.2.46258
New Products added 
• RM-814, RM-815, RM-816, RM-781, RM-832, RM-833, RM-834, RM-761, RM-762, RM-799, RM-800, RM-764, RM-778
New features
• New version of FUSE connection Manager
• New version of Flash Update Package
• New version of Autotuning components
• New version of Product API
• New version of Connectivity Cable Driver
• Support for Windows 7 64 bit version (Note: FLS- 5 drivers do not  support 64 bit OS, so phones using FLS-5 /USB_FBUS connection can not be  serviced in 64 bit operating systems)
• New installation package with MS Visual C++ 2010

Error Corrections & changes
• Installation package now includes MS Visual C++ 2010 Redistributable  Package. Installation will happen automatically when  Phoenix_Service_Software_2011_38_3_46817.exe is run.
• The Envira Tool ( The ZIP package generator in Help / Troubleshooting - menu) updated
• Correction to DCT-4 autotuning with Willtek / Aeroflex test equipment  detection. Testers were previously identified only if they reported  themselves as Willtek. Testers are now identified also as Aeroflex.
• Improvements to Product Code changes with simultaneous flashing.  Readiness to flash future "USB Only" - concept phones added. NOTE:  Please see product specicic documents for information on the  restrictions of product code changes with "flash" - option, especially  in the cases of Software downgrade with Tucson system!
• Updated label printing components
• Support for long product codes
Please note: 
• Microsoft DOT.NET version 2 Service Pack 2 is now the minimum  requirement. Phoenix installation will check PC for the DOT.NET version  and update it automatically when PC has online connection. Without  online connection, old DOT.NET versions must be updated manually.
• New common data package location in use. Please see document SR1315 in KICS Information Center for further information.
• All Nokia Service Software Applications will use following location for product specific data:
- Windows XP: C:\Documents and Settings\All Users\Application Data\Nokia\Packages
- Windows 7: C:\Program Data\Nokia\Packages
• Please see articles SR1774 and 1786 for more information on the use of  Nokia Data Package manager - tool, and article SR1854 for more  information on the Nokia Service Application Manager Tool.
• During installation, Data Packages should be installed in these  directories, if they install to any other location by default. target  folder for local data packages can be changed in the installation wizard  manually
• This version contains the latest Tucson components. Therefore it is not necessary to use Tucson Add-On Installation Packages 
• Before you start Phoenix or Care Suite installation to Windows 7 the  User Account Control (UAC) should be turned off from Windows Control  Panel settings. 
• For more information concerning new options in "Firmware Update" -  menu and their use, Please see documents SR1313 and SR1659 in KICS  Information Center.
• Tucson operations combined with "flash" - option are now handled in  the same way as "refurbishment", which requires Mass Memory Content File  to be available. 
• Use of Flash option simultaneously with product code change for USB  Only phones is restricted. It is recommended to flash phone separately  with Firmware Update. Please refer to product specific instructions.
• Connection media to FLS-5 must be configured to be "USB_FBUS", after  FLS-4 support has been removed FBUS does not work anymore with FLS-5
4. KNOWN ERRORS & LIMITATIONS
• FLS-5 drivers do not support 64 bit OS, so phones using FLS-5  /USB_FBUS connection can not be serviced in 64 bit operating systems
• Software downgrade with Tucson system is only possible for BB 5.0 products supporting the Data Package 2 concept.
• Flashing with setup FLS-5, SS-46 and product specific adapter is not  supported anymore. FLS-5 can be used with other product specific cables  and adapters, but not with SS-46 Interface Adapter.
• If you install old DCT-4 data packages, Flash Update Package File  installation path may be wrong. This is caused by very old DCT-4 data  packages which contain Flash Update Package and overwrite current  information during installation. If you experience problems when  updating FPS-x prommers, please check that Phoenix “Prommer maintenance”  is looking for the files from the correct location which is “C:\Program  Files\Common Files\Nokia\Tss\Flash”. If not, Phoenix will show error  “Update via ini – file failed”. In this case, select “Update” from that  Phoenix “Prommer maintenance” – UI, browse to correct directory and  select “fpsxupd.ini” for all other prommers except the FPS-8. 
• Refurbishment flashing and product code change for RX-51 product requires SX-4 card to be available.
• FPS-21 flashing for RX-51 works only with TCPIP connection. FPS-21  prommer with new HW version 11 has been released to correct this. Sales  pack code is 0089J83 , old HW version is not delivered anymore
• Please refer to product specific documents and instructions concerning the limitations of the RX-51 product
• RX-51 flashing does not work when CU-4 is used
• RX-51 Product Code changes work only without FLASH option, please flash phone separately
• When version 2010_12_8_42304 or newer with FUSE connection manager is  installed on top of older Phoenix versions, there may be an additional  delay of several minutes when you start Phoenix for the first time.  Please wait patiently; Phoenix will start after configuration is  finished.
• When using Data Package download functions with online connection,  download times may occasionally be long. This is not caused by Phoenix  (or Care Suite). The download speed from online servers is occasionally  is known to be slow, depending on how data is buffered on caching  servers.
• After you close Phoenix, it may not restart. To rectify this:
- Use Windows Task Manager to manually shut down phoenix.exe and FuseService.exe processes, or optionally restart your PC
• It is not possible to program Mass Media Content file to some devices  over direct USB cable connection, due to the large size of the file. For  these models a feature called “Media Check” has been implemented. When  this type of product is connected to service software / PC via direct  USB cable the refurbishment option will be disabled. Please use a flash  prommer. Affected products using Media Check are: RM-122, RM-175,  RM-176, RM-186, RM-246, RM-247, RM-296, RM-297, RM-320, RM-462, RM-472,  RM-484, RM-505, RM-555, RM-559
• To be able to use the help files in Windows 7 you need to install  Windows Help program (WinHlp32.exe) for Windows 7. Ways to locate  WinHlp32.exe:
- Start Phoenix with online connection to Internet, select "Help" and  "Phoenix help". Click the "Microsoft Help and Support" website link.  Download WinHlp32 and install it.- Go to http://www.microsoft.com. Type  "WinHlp32" to "Search Microsoft.com" - field. Locate Windows Help  program (WinHlp32.exe) for Windows 7 and install it
• When using flash prommers, only one connection type to one prommer is  allowed. Please use either NFPD USB or NFPD TCPIP connection to one  prommer, not both connections to same prommer
5. INSTALLATION 
• If you have Phoenix External 2007.4.6.170 or older you must uninstall it before installing this release.
• Download Phoenix_Service_Software_2011_38_3_46817.exe application file to your computer (e.g. C:\TEMP). 
• Close all other programs.
• Disconnect all flash prommers and phones which may be connected to PC  via USB connection (reconnect them only after Phoenix installation has  been completed)
• Run Phoenix_Service_Software_2011_38_3_46817.exe and follow instructions on the screen to install Phoenix Service Software
• If your PC does not have Microsoft DOT.NET version 2 Service Pack 2 or  newer, and PC is not connected to internet you must update DOT.NET  manually to the required version. When PC has online connection, DOT.NET  will be updated automatically.
• Connect a dongle (PK-1, PKD-1, FLS-4S, FLS-5) when message appears on the screen
• If you are prompted to update any existing driver or file versions, select “yes”.
• Depending on the operating system, the PC may require rebooting.
• Allow Windows to register the Phoenix components.
• Open Phoenix, use FUSE Connection Manager to configure connections depending on the tools you use
• If you use CU-4, please pair the connection with service adapter by selecting “pair with service adapter” - option
• Update your prommer with the latest software included in this installation package.
• Install and use the latest available product specific data packages or flash bundles

6. Supported operating systems and user rights
• Windows XP Service Pack 1 or higher 
• When installing Phoenix into Win XP you must have local admin rights.
• When using in Win XP, user must have power user rights.
• Windows 7 32 Bit version
• Windows 7 64 Bit version

[senfour]

.:NEW:.Phoenix Service Software 2011.38.003.46817 Cracked | ********** GSM

[senfour]

How_to_install_and_use_MT_Box_Nokia_as_PKD1_dongle

How_to_use_phoenix

Phoenix-Service-Software-2011.14.003.45843_Cracked

Phoenix-Service-Software-2011.14.004.45945-Cracked

Phoenix_2009.34.7_.exe

Phoenix_Service_Software_2010.08.004.41526_

Phoenix_Service_Software_2010.24.003.43250_Cracked

Phoenix_Service_Software_2010_12.008_42304_Cracked _.exe

Phoenix_Service_Software_2010_38_5_44210.exe

Phoenix_Service_Software_2011.02.000.44842_Cracked

Phoenix_Service_Software_2011.08.005.45529_Cracked .exe

Phoenix_Service_Software_2011.24.002.46258_Cracked

Phoenix_Service_Software_2011_38_003_46817_Cracked

[abd_aziz2006]

thanks all linque is ok any one tested this version???

[aziahmed]

This is what we were waiting
thank you my friend Farouk

[senfour]

here same links


hotfile uploading fileserve filemac WUPLOAD FILESONIC

[Adolf1944]

thanks all linque is ok any one tested this version???

[sahassan82]

Originally Posted by abd_aziz2006

thanks all linque is ok any one tested this version???

Originally Posted by Adolf1944

thanks all linque is ok any one tested this version???

Here is tested Version

Download Link : http://www.filesin.com/59BFE63619/download.html

http://forum.gsmhosting.com/vbb/f299/phoenix-service-software-2011-38-3-46817-cracked-1354185/

[senfour]

Originally Posted by sahassan82

Here is tested Version

i think thing provided inadequate

FILESONIC

uploading

fileserve

filemac

WUPLOAD

hotfile

[yasser07]

Originally Posted by senfour

i think thing provided inadequate

FILESONIC

uploading

fileserve

filemac

WUPLOAD

hotfile

Thank you my brother continue with new and excellent work

[fayssalgsm]

very nice bro keep it up
br,

[senfour]

Originally Posted by fayssalgsm

very nice bro keep it up
br,

We missed you fayçel which you Hidden

[abd_aziz2006]

latest version tested by me work fine with with n97 6300 6303 n71 and 5800 thanks f or all user

[senfour]

Originally Posted by abd_aziz2006

latest version tested by me work fine with with n97 6300 6303 n71 and 5800 thanks f or all user

Thanks for confirmation and testing my brother

all U need about phoenix here

[hocin18.]

thanks.....thanks sanfour