Nokia 5530 after flash only vibrate

[gsm_]

Nokia 5530 after flash only vibrate

Module ver: 1.0.0.20454(13-03-2012), Library ver: 1.0.0.13962(12-03-2012)
Processing MCU file: RM-504_40.0.003_prd.core.C00
[BB5,XSR 1.5] size: 105.24 MB
Supported Ids: 4003192101011105, 400C192101011105, 4003192101021105, 400C192101021105, 400C192101031105, 4003192101051105, 400C192101051105
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB ROM device ...
CMT SYSTEM ASIC ID: 000000010000022600010006400C192101051105 [RAPIDOYAWE ver: 1.1x]
CMT EM0 ID: 00000296
CMT EM1 ID: 00000B22
CMT PUBLIC ID: 07E00112667C0052BFF1517015C1983382EBFD56
CMT ASIC MODE ID: 00
CMT ROOT KEY HASH: B8C3ADECFC997FCD8081D3DEAF870B8C
CMT ROM ID: 4B9B75103E691FF8
Loading CMT secondary boot code
SecondaryBoot: RAPIDOv11_2nd.fg [BB5] version: 11.14.0 revision: 2.0 size: 0x3B80
Supported Ids: 0003192101001203, 000C192101001203, 4003192101001203, 400C192101001203, 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105, 4003192101051103, 400C192101051103, 400C192101051105, 4003192101051105
eBB5ProtocolType: NEW
Secondary boot loaded.
Storage0: 0000 0000 - 0000 0000 type: RAM, asic:CMT
Storage1: FFFF 0000 - 0000 0000 type: MMC, asic:CMT
Storage2: 0020 0040 - 0000 0031 [ST NAND KAT00F00RA] type: FLASH,NOR, asic:CMT
Storage3: 0000 0001 - 0000 0000 [unused/removed] type: FLASH,NOR, asic:CMT
Storage4: 0020 0040 - 0000 0031 [ST NAND KAT00F00RA] type: FLASH,MuxOneNAND, asic:CMT
Suggested algorithm: XSR 1.5
Loading CMT update server data
Algorithm: RAPIDOv11_XSR15_alg.fg [XSR 1.5] version: 11.14.0 revision: 2.0 size: 0x8798F
Supported Ids: 0003192101001203, 000C192101001203, 4003192101001203, 400C192101001203, 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105, 4003192101051103, 400C192101051103, 400C192101051105, 4003192101051105
Update server code loaded.
FUR: Adding Asic CMT as client OK.
CERT backup skipped.
CMT PAPUBKEYS is blank/erased.
Storing certificate [NPC, CCC, HWC, R&D] ...OK
Partitioning....
Partitioning complete
Erase size: 158.19 MB
CMT FLASH,MuxOneNAND area [00040000-00082FFF]
CMT FLASH,MuxOneNAND area [00083400-003FFFFF]
CMT FLASH,MuxOneNAND area [00400000-007FFFFF]
CMT FLASH,MuxOneNAND area [00800000-00D5FFFF]
CMT FLASH,MuxOneNAND area [00D60000-09E5FFFF]
Formating partition ...
Flash programming ...
CMT ADA block sent
CMT KEYS block sent
CMT PRIMAPP block sent
CMT RAP3NAND block sent
CMT PASUBTOC block sent
Selecting first CMT PAPUB block with matching RootKey.
CMT PAPUBKEYS: F2B05364 [RAP Certificate 168 v.1] sent
CMT SOS*UPDAPP block sent
CMT SOS*ENO block sent
CMT SOS*DSP0 block sent
CMT SOS*ISASW block sent
CMT SOS+CORE block sent
CMT SOS+ROFS1 block sent
Programming completed in 1 min 41.148 s
Processing PPM file: RM-504_40.0.003_prd.rofs2.V11
[BB5,XSR 1.5] size: 19.33 MB
Supported Ids: 4003192101011105, 400C192101011105, 4003192101021105, 400C192101021105, 400C192101031105, 4003192101051105, 400C192101051105
Erase size: 32 MB
CMT FLASH,MuxOneNAND area [07360000-0935FFFF]
Flash programming ...
CMT SOS+ROFS2 block sent
Programming completed in 18.921 s
Processing PPM file: RM-504_40.0.003_C06_prd.rofs3.fpsx
[BB5,XSR 1.5] size: 6.07 MB
Supported Ids: 4003192101011105, 400C192101011105, 4003192101021105, 400C192101021105, 400C192101031105, 4003192101051105, 400C192101051105
Erase size: 11 MB
CMT FLASH,MuxOneNAND area [09360000-09E5FFFF]
Flash programming ...
CMT SOS+ROFS3 block sent
Programming completed in 5.929 s
Processing CNT file: RM-504_32.0.007_007_000_U001.uda.fpsx
[BB5,XSR 1.5] size: 6.13 MB
Supported Ids: 4003192101011105, 400C192101011105, 4003192101021105, 400C192101021105, 400C192101031105, 4003192101051105, 400C192101051105
Erase size: 88.75 MB
CMT FLASH,MuxOneNAND area [09E60000-0F71FFFF]
Flash programming ...
Programming completed in 6.667 s
Total time for flashing process(boot+erase+write) was 2 min 20.302 s
Waiting for USB device removal ...OK
Waiting for USB device arrival ...
Waiting for device boot up ...

[unlock_allgsm]

witch box are you used first mak sur you flashed with latest version if you see sam problem use ppm black use search button to now how to use

[gsm_]

Number of Image Files: 4

Processing Image File :
RM-504_40.0.003_prd.core.C00
CMT Type : BB5
CMT Algorithm : XSR 1.5
Secondary Sending Speed : 650000Hz
Algorithm Sending Speed : 13000000Hz
Program Sending Speed : 13000000Hz
Message Reading Speed : 98000Hz
Number of Blocks : 444
Entry Point: 0x2670AB
Page Format : -1
MAX PAGE : 0x00040000

Processing Image File :
RM-504_40.0.003_C06_prd.rofs3.fpsx
CMT Type : BB5
CMT Algorithm : XSR 1.5
Secondary Sending Speed : 650000Hz
Algorithm Sending Speed : 13000000Hz
Program Sending Speed : 13000000Hz
Message Reading Speed : 98000Hz
Number of Blocks : 27
Entry Point: 0x00D7
Page Format : -1
MAX PAGE : 0x00040000

Processing Image File :
RM-504_40.0.003_prd.rofs2.V11
CMT Type : BB5
CMT Algorithm : XSR 1.5
Secondary Sending Speed : 650000Hz
Algorithm Sending Speed : 13000000Hz
Program Sending Speed : 13000000Hz
Message Reading Speed : 98000Hz
Number of Blocks : 80
Entry Point: 0x00D7
Page Format : -1
MAX PAGE : 0x00040000

Processing Image File :
RM-504_32.0.007_007_000_U001.uda.fpsx
CMT Type : BB5
CMT Algorithm : XSR 1.5
Secondary Sending Speed : 650000Hz
Algorithm Sending Speed : 13000000Hz
Program Sending Speed : 13000000Hz
Message Reading Speed : 98000Hz
Number of Blocks : 25
Entry Point: 0x00D1
Page Format : -1
MAX PAGE : 0x00040000


Reading battery value : 0 mV

Rebooting Phone...



AUTO SELECTED DEAD USB FLASHING...

If Flashing DOES NOT Start in 5 Seconds,
Then Perform Steps 1, 2, 3 and 4...

1. Remove USB and Battery...
2. Insert USB.
3. Insert Battery. (Some phones boot automatically)
4. Please Power on phone shortly...

AdvanceFBox SendBootCodeEx
Initialise*****trap_DCT5 DIR
BootFlashMode_DCT5
BootRom Verified!

BootFlashModeDCT5Ex Succeeded First Time
SYSTEM_ID_RESPONSE_BB5 (0xC0) - 0 (0x00) bytes returned
Number of Sub Blocks 7 (0x07)
1 SYSTEM_ASIC_ID 01
Block Length : 21 (15)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 00000001
ID DWORD 1 : 00000226
ID DWORD 2 : 00010006
ID DWORD 3 : 400C1921
ID DWORD 4 : 01051105
2 EM_ASIC_ID 02
Block Length : 5 (05)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 00000296
3 EM_ASIC_ID 02
Block Length : 5 (05)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 00000B22
4 PUBLIC_ID 12
Block Length : 21 (15)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 07E00112
ID DWORD 1 : 667C0052
ID DWORD 2 : BFF15170
ID DWORD 3 : 15C19833
ID DWORD 4 : 82EBFD56
5 ASIC_MODE_ID 13
Block Length : 2 (02)
BB ASIC Index : 0 (00) CMT
Mode Id : 00
6 ROOT_KEY_HASH 14
Block Length : 17 (11)
BB ASIC Index : 0 (00) CMT
Hash : B8 C3 AD EC FC 99 7F CD 80 81 D3 DE AF 87 0B 8C
7 ROM_ID 15
Block Length : 9 (09)
BB ASIC Index : 0 (00) CMT
CRC 0 : 4B9B7510
CRC 1 : 3E691FF8

START FLASHING
RawLoaderExtract: RM-504_40.0.003_prd.core.C00
RawLoaderExtract: Match Found ROOT_KEY_HASH
RAW LOADER SENT...
FAST PHONE....
UPDATE AGENT SENT...

BB5 ADL Loader Start Up... (Please Wait...)
Found Nokia BB5 ADL Loader USB Generic..

================================================== =====
Processing : RM-504_40.0.003_prd.core.C00
================================================== =====

Partition Block Found
>> Partition Version : 00010000
>> Spare : FFFFFFFF
>> Number of Partitions : 00000004
>> Partition 1 : COPIEDOS
>> Partition 2 : DEMANDONOS
>> Partition 3 : FILESYSTEM
>> Partition 4 : PMM
Partition Complete : No Error - 0 (0x00)

Erase Block Found
>> Erasing area 0x00040000 - 0x00082FFF, Type: NAND, Subsystem: CMT
>> Erasing area 0x00083400 - 0x003FFFFF, Type: NAND, Subsystem: CMT
>> Erasing area 0x00400000 - 0x007FFFFF, Type: NAND, Subsystem: CMT
>> Erasing area 0x00800000 - 0x00D5FFFF, Type: NAND, Subsystem: CMT
>> Erasing area 0x00D60000 - 0x09E5FFFF, Type: NAND, Subsystem: CMT
>> Formatting Active Partitions
Erase Complete : No Error - 0 (0x00)

Data Block Found : 444 Blocks
>> CMT Rootkey Hash CERT : ADA
>> CMT Rootkey Hash CERT : KEYS
>> CMT Rootkey Hash CERT : PRIMAPP
>> CMT Rootkey Hash CERT : RAP3NAND
>> CMT Rootkey Hash CERT : PASUBTOC
>> CMT Rootkey Hash CERT : PAPUBKEYS
>> CMT Rootkey Hash CERT : SOS*UPDAPP
>> CMT Rootkey Hash CERT : SOS*ENO
>> CMT Rootkey Hash CERT : SOS*DSP0
>> CMT Rootkey Hash CERT : SOS*ISASW
>> CMT Rootkey Hash CERT : SOS+CORE
>> CMT Rootkey Hash CERT : SOS+ROFS1
Continue Flash Complete : No Error - 0 (0x00)


================================================== =====
Processing : RM-504_40.0.003_C06_prd.rofs3.fpsx
================================================== =====

Erase Block Found
>> Erasing area 0x09360000 - 0x09E5FFFF, Type: NAND, Subsystem: CMT
Erase Complete : No Error - 0 (0x00)

Data Block Found : 27 Blocks
>> CMT Rootkey Hash CERT : SOS+ROFS3
Continue Flash Complete : No Error - 0 (0x00)


================================================== =====
Processing : RM-504_40.0.003_prd.rofs2.V11
================================================== =====

Erase Block Found
>> Erasing area 0x07360000 - 0x0935FFFF, Type: NAND, Subsystem: CMT
Erase Complete : No Error - 0 (0x00)

Data Block Found : 80 Blocks
>> CMT Rootkey Hash CERT : SOS+ROFS2
Continue Flash Complete : No Error - 0 (0x00)


================================================== =====
Processing : RM-504_32.0.007_007_000_U001.uda.fpsx
================================================== =====

Erase Block Found
>> Erasing area 0x09E60000 - 0x0F71FFFF, Type: NAND, Subsystem: CMT
Erase Complete : No Error - 0 (0x00)

Data Block Found : 25 Blocks
Continue Flash Complete : No Error - 0 (0x00)


Flashing Done...
Total Flashing Time (Erase + Flashing) : 00:00:54
(Booting time is NOT Included)

Waiting for Phone to Start-Up..(Max 150 seconds)

Mxkey ATF UB UFS+HWK i Use Blank ppm same Problam

[igma]

my friend try flashing with fbus cable sometimes it works if it doesn't that just open up the phone and try rehoting it little

[aliyousafzai]

use jaf bro ur problem solved 100%

[jawad memon]

download letus version

[Ahsaan*]

brother before flash what was the condetion ?

[DHEERAJ_SHARMA]

Originally Posted by gsm_

Nokia 5530 after flash only vibrate

dear brother


you konw


what is eno firmwere

[Absar_Global]

brother flash with ver.40.0.3 your problum solve .................................................. .......................

[upgraderazvan]

flash latest verion.use navifirm 1.6