Nokia 6650 RM-400 after unlocking - Contact Retailer

[Boshko_Alfa]

Nokia 6650 RM-400 after unlocking - Contact Retailer

i make sx4gen and write PM but err. when try to write pm 1 and 309 :/

Phone is in: Local mode
Scanning files, please wait...
Done
Selected Highest installed version: 04.18
Mcu rm400_04.18_prd_core.fpsx
Ppm rm400_04.18_prd_v05_01_euro5.fpsx
Ppm rm400_04.18_prd_rofs3erase.fpsx
Content rm400_04.18_prd_uda.fpsx
Model: RM-400 ( 6650D-1C CABLE 6650)
V ICPR71_09w04.5/07-04-09/RM-400 (c) Nokia
Production serial number REK494110
Product code 0556620
Module code 0203716
Basic production code 0556857
Flash code
Order number
Long production SN 0
MCU SW V ICPR71_09w04.5/07-04-09/RM-400/(c) Nokia
HW 5005
PCI
RFIC 17141715
DSP rm324_mp.ICPR71_09w03
APE SW Core 04.18
APE Variant 05.01
IMEI: 35310302102xxx1
WARNING: VPP pin is not connected, disabling VPP.
Trying box authorize
PMM Authorize SUCCESSFULL
PMM Send File
Warning: Failed to write 001:0000, 114bytes.
Use SX4 button to authorize
Warning: Failed to write 001:0001, 4bytes.
Use SX4 button to authorize
Warning: Failed to write 001:0002, 98bytes.
Use SX4 button to authorize
Warning: Failed to write 001:0004, 110bytes.
Use SX4 button to authorize
Warning: Failed to write 001:0005, 4bytes.
Use SX4 button to authorize
Warning: Failed to write 001:0006, 98bytes.
Use SX4 button to authorize
Warning: Failed to write 001:0008, 110bytes.
Use SX4 button to authorize
Warning: Failed to write 001:000D, 98bytes.
Use SX4 button to authorize
Warning: Failed to write 001:000F, 4bytes.
Use SX4 button to authorize
Warning: Failed to write 001:0010, 98bytes.
Use SX4 button to authorize
Warning: Failed to write 001:0012, 98bytes.
Use SX4 button to authorize
Warning: Failed to write 001:0014, 98bytes.
Use SX4 button to authorize
Warning: Failed to write 001:0016, 16bytes.
Use SX4 button to authorize
Warning: Failed to write 001:0017, 4bytes.
Use SX4 button to authorize
Warning: Failed to write 001:0018, 84bytes.
Use SX4 button to authorize
Warning: Failed to write 001:0019, 4bytes.
Use SX4 button to authorize
Warning: Failed to write 001:001A, 110bytes.
Use SX4 button to authorize
Warning: Failed to write 001:001B, 4bytes.
Use SX4 button to authorize
Warning: Failed to write 001:001C, 98bytes.
Use SX4 button to authorize
Warning: Failed to write 001:001D, 10bytes.
Use SX4 button to authorize
Warning: Failed to write 001:001F, 98bytes.
Use SX4 button to authorize
Warning: Failed to write 001:0021, 36bytes.
Use SX4 button to authorize
Warning: Failed to write 001:0022, 80bytes.
Use SX4 button to authorize
Warning: Failed to write 001:0028, 16bytes.
Use SX4 button to authorize
Warning: Failed to write 001:0029, 182bytes.
Use SX4 button to authorize
Warning: Failed to write 001:002A, 4bytes.
Use SX4 button to authorize
Warning: Failed to write 001:002B, 36bytes.
Use SX4 button to authorize
Warning: Failed to write 001:002C, 182bytes.
Use SX4 button to authorize
Warning: Failed to write 06B:0003, 70bytes.
Use SX4 button to authorize
Warning: Failed to write 06B:0019, 132bytes.
Use SX4 button to authorize
Warning: Failed to write 134:0003, 1bytes.
Use SX4 button to authorize
Warning: Failed to write 135:0000, 4bytes.
Use SX4 button to authorize
Warning: Failed to write 135:0001, 2bytes.
Use SX4 button to authorize
Warning: Failed to write 135:0002, 12bytes.
Use SX4 button to authorize
Warning: Failed to write 135:0004, 12bytes.
Use SX4 button to authorize
Warning: Failed to write 135:0005, 12bytes.
Use SX4 button to authorize
Warning: Failed to write 135:0007, 12bytes.
Use SX4 button to authorize
Warning: Failed to write 135:0008, 12bytes.
Use SX4 button to authorize
Warning: Failed to write 135:0011, 12bytes.
Use SX4 button to authorize
Warning: Failed to write 155:0004, 4406bytes.
Use SX4 button to authorize
Warning: Failed to write 162:0000, 39bytes.
Use SX4 button to authorize
Operation Completed

and on INFO phone all is ok:

Phone is in: Local mode
Model: RM-400 ( 6650D-1C CABLE 6650)
V ICPR71_09w04.5/07-04-09/RM-400 (c) Nokia
Production serial number REK494110
Product code 0556620
Module code 0203716
Basic production code 0556857
Flash code
Order number
Long production SN 0
MCU SW V ICPR71_09w04.5/07-04-09/RM-400/(c) Nokia
HW 5005
PCI
RFIC 17141715
DSP rm324_mp.ICPR71_09w03
APE SW Core 04.18
APE Variant 05.01
Retu 15
Tahvo 22
APE HW 256
APE ADSP SW 256
APE BT HCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12676.
IMEI: 353103021028621
WARNING: VPP pin is not connected, disabling VPP.
Phone Not powered
V ICPR71_09w04.5/07-04-09/RM-400 (c) Nokia
IMEI: 35310302102xxx1
Operator: 2440700000000000
Operator Name: AT&T;U.S.A. (3650)
Profile bits: 0000000000000000
Sim Status: Not locked

also try with mxkey, ufs.. but phone still on CS. Try to rewrite RPL w/o NPC data from other working 6650 also and other PM file - but still on Contact Retailer

this is self test:
Phone is in: Local mode
Model: RM-400 ( 6650D-1C CABLE 6650)
V ICPR71_09w04.5/07-04-09/RM-400 (c) Nokia
Production serial number REK494110
Product code 0556620
Module code 0203716
Basic production code 0556857
Flash code
Order number
Long production SN 0
MCU SW V ICPR71_09w04.5/07-04-09/RM-400/(c) Nokia
HW 5005
PCI
RFIC 17141715
DSP rm324_mp.ICPR71_09w03
APE SW Core 04.18
APE Variant 05.01
IMEI: 3531030210xxxx1
WARNING: VPP pin is not connected, disabling VPP.
Phone is in: Local mode

Phone SelfTest status:
Passed: TAHVOINT
Passed: UEM_CBUS_IF
Passed: EAR_DATA_LOOP
Passed: SIM_CLK_LOOP
Passed: SIM_IO_CTRL_LOOP
* Passed: SECURITY
NotExecuted: PWR_KEY
NotExecuted: CURRENT_CONS
NotExecuted: BACKUP_BATT
NotExecuted: SLEEPCLK_FREQ
NotExecuted: HOOKINT
NotExecuted: BTEMP
NotExecuted: EXT_DEVICE
NotExecuted: CDSP_RF_BB_IF
NotExecuted: CDSP_RF_SUPPLY
NotExecuted: CDSP_TX_IQ
NotExecuted: CDSP_TXC_DATA
NotExecuted: CDSP_PWR_DETECTOR_BIAS
NotExecuted: CDSP_RX_PLL_PHASE_LOCK
NotExecuted: CDSP_TX_PLL_PHASE_LOCK
NotExecuted: CDSP_WCDMA_TX_POWER
NotExecuted: CDSP_RX_IQ_LOOP_BACK
NotExecuted: CDSP_GSM_TX_POWER
Summary: Passed(6), NotExucuted(17), OtherStatus(0)

[Boshko_Alfa]

is there any body to help about this problem?
Phone is totaly new!

[bhavesh123]

Give me the phone info by mxkey.....

[Boshko_Alfa]

here is bus check:

Using device: UFS_USB V2.8 (c) SarasSoft 2007.
Library version: 1.0.0.9019(20-11-2010), 1.0.0.15042(20-11-2010)
CMT Data :
SYSTEM ASIC ID: 000000010000022600010006400C192101031103 [RAPIDO3G ver: 1.13]
EM0 ID: 00000295
EM1 ID: 00000B22
PUBLIC ID: 09400001038D015899AEC9499F65AE551ECD8C75
ASIC MODE ID: 00
ROOT KEY HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM ID: 4B9B75103E691FF8
SecondaryBoot: RAPIDOv11_2nd.fg [BB5] version: 1.37.1 revision: 0.0 size: 0x3B80
Supported Ids: 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105
FlashID0: 00EC 0030 - 0040 0221 [Samsung K5W1G13ACM-DJ60,1 Gbits] type: MuxOneNAND,CMT
ExtBUSC: 0000 0000 0000 0000 0000 0000 0000 0000
TransmissionMode: 16Bit
Algorithm: RAPIDOv11_algo.fg [XSR 1.5] version: 1.40.0 revision: 0.0 size: 0x27520
Supported Ids: 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105
CMT PAPUBKEYS HASH: E3B2ECDF54959A4084B1A345E5BDA91749FFFB40
TransmissionMode: DDR&TX2
Original Imei: 35310302102862
Original Product code: 0560210
Bluetooth ID: 001F5DE3FC52

Phone Type: RM-400 (Nokia 6650d-1c)
SW Version: V ICPR71_09w04.5 07-04-09 RM-400 (c) Nokia
Imei plain: 35310302102862-1
Product Code: 0556856
Language Pack:
- not available.


Imei net: 353103021028621
Version: SIMLOCK SERVER
Counter: 0/3, 0/10

CONFIG_DATA: 2440700000000000
PROFILE_BITS: 0000000000000000

BLOCK 1: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 2: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 3: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 4: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 5: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 6: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 7: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF

This is log when try to repair simlock:

Imei net: 353103021028621
Version: SIMLOCK SERVER
Counter: 0/3, 0/10

CONFIG_DATA: 2440700000000000
PROFILE_BITS: 0000000000000000

BLOCK 1: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 2: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 3: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 4: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 5: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 6: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 7: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF

Using device: UFS_USB V2.8 (c) SarasSoft 2007.
Library version: 1.0.0.9019(20-11-2010), 1.0.0.15042(20-11-2010)

Product: V ICPR71_09w04.5 07-04-09 RM-400 (c) Nokia
ApeCoreSw: 04.18

Using cached productData[09400001038D015899AEC9499F65AE551ECD8C75] ...

Calculating SIMLOCK using security server ...
SERVER->Served by MXKEY - BLADE X at host1, agent version 1.1 revision 0.4

Completed in 1.188 s

RPL saved to "C:\mobileEx\3.4\data\backup\BB5_RM-400_353103021028621_SIM.RPL"
Updating SIMLOCK...OK

Reading Simlock info ...
Imei net: 353103021028621
Version: SIMLOCK SERVER
Counter: 0/3, 0/10

CONFIG_DATA: 2440700000000000
PROFILE_BITS: 0000000000000000

BLOCK 1: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 2: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 3: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 4: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 5: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 6: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 7: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF

[786ali]

@ Boshko_Alfa
help me
http://forum.gsmhosting.com/vbb/f98/...9/#post6684595

[Boshko_Alfa]

sry U8220 and u8110 only supported. Maybe before new year will be realesed solution, but not public.