Nokia BB5 Flash Files Download - Page 31 - GSM-Forum

H@L9001 · 11-14-2006, 17:50

Here it is (the new RM-1 firmware):
http://forum.gsmhosting.com/vbb/arch.../t-347153.html

H@L9001 · 11-15-2006, 02:10

Hy guys, now, i've a dead 6630

During the flashing, i don't know why, windows has re-installed the usb driver (or maybe something else) and the firmware upgrade stopped

I think it's not correct for the flashing...
Now I can't do anithing; if I power on the phone it show me only a withe screen

And if i connect the smarthphone "ON" to an unused USB port, Windows install this driver: "Nokia BB5 ADL Loader USB Generic". Can I do anything for my dead phone (unless go to a Nokia Point)

Thanks, Mauro

dinuksha_asela · 11-15-2006, 05:30

Quote:

Originally Posted by H@L9001

Hy guys, now, i've a dead 6630

During the flashing, i don't know why, windows has re-installed the usb driver (or maybe something else) and the firmware upgrade stopped

I think it's not correct for the flashing...
Now I can't do anithing; if I power on the phone it show me only a withe screen

And if i connect the smarthphone "ON" to an unused USB port, Windows install this driver: "Nokia BB5 ADL Loader USB Generic". Can I do anything for my dead phone (unless go to a Nokia Point)

Thanks, Mauro

Oh Man! Thts Completely Normal.. It loads the ADL loader while its Flashing.. Did u Unplugged ur phone during the recognition..??

U Shldnt even touch ur phone while its flashing!!

still u can Flash ur phone using Open Method.. Choose Open Product From Phoenix.. THen Slect RM-1 From THe Prouct List... Then Slect SW Upddate From Flashing Menu.. Select ur Country.. Click Start.. After Tht Don't Touch ur PHONE!! ...if ur not sure check the Tutorial Again..

H@L9001 · 11-15-2006, 10:56

Quote:

Originally Posted by dinuksha_asela

Oh Man! Thts Completely Normal.. It loads the ADL loader while its Flashing.. Did u Unplugged ur phone during the recognition..??

U Shldnt even touch ur phone while its flashing!!

still u can Flash ur phone using Open Method.. Choose Open Product From Phoenix.. THen Slect RM-1 From THe Prouct List... Then Slect SW Upddate From Flashing Menu.. Select ur Country.. Click Start.. After Tht Don't Touch ur PHONE!! ...if ur not sure check the Tutorial Again..

No no, i haven't touch the phone during flashing

I've tried the "Open Prduct"
After pressing start the program tell me:
"Connected product could not be recognized"
"Are you sure that you want to continue with selected flash filese?"
I press YES but then, at about 5%, i have this "output":

Reading data from phone
Reading phone information
No phone detected!
Reading flash settings from file(s)
RD info:
Starting to flash Charlie HW 0
Because this is older than 5120 phone may lose its IMEI or require user disk formatting after flashing
Starting AdlLoaders, wait 15 seconds...
Starting flash...
Starting USB flashing.
Cmt->Trying to verify communication 1 of 2
Cmt->Trying to verify communication 2 of 2
Cmt->Failed to verify communication.
Cmt->AdlServer: Resending requesting for phoneinfo
Cmt->Adl Server get status: MTI error -> Check Connections
Flashing failed.
Flashing failed.

And recive this error:

Flashing failed.
Error occured during the flashing procedure.
HRESULT 0x84009427 (-2080336857)
Unable to get error message

I'm using Phoenix Service Software 2006.20.9.148 with diego 3.07 sp2
I've tried that on two different PC but the result is the same an the phone remain "white" :-P
Bye

jessemoore · 11-15-2006, 14:41

Quote:

Originally Posted by Gsmterror

Hi all

Download BB5 Flash Files

www.gsm-arena.dl.am

Have Fun

I have generic Nokia N91 firmware files ( version V 2.10.013 ) If you would like to add them to your list?

dinuksha_asela · 11-16-2006, 05:41

Quote:

Originally Posted by H@L9001

No no, i haven't touch the phone during flashing

I've tried the "Open Prduct"
After pressing start the program tell me:
"Connected product could not be recognized"
"Are you sure that you want to continue with selected flash filese?"
I press YES but then, at about 5%, i have this "output":

Reading data from phone
Reading phone information
No phone detected!
Reading flash settings from file(s)
RD info:
Starting to flash Charlie HW 0
Because this is older than 5120 phone may lose its IMEI or require user disk formatting after flashing
Starting AdlLoaders, wait 15 seconds...
Starting flash...
Starting USB flashing.
Cmt->Trying to verify communication 1 of 2
Cmt->Trying to verify communication 2 of 2
Cmt->Failed to verify communication.
Cmt->AdlServer: Resending requesting for phoneinfo
Cmt->Adl Server get status: MTI error -> Check Connections
Flashing failed.
Flashing failed.

And recive this error:

Flashing failed.
Error occured during the flashing procedure.
HRESULT 0x84009427 (-2080336857)
Unable to get error message

I'm using Phoenix Service Software 2006.20.9.148 with diego 3.07 sp2
I've tried that on two different PC but the result is the same an the phone remain "white" :-P
Bye

Remove Sim and MMC-Card. Open Phoenix ,go to Manage Connection and set "No Connection " on first ,then open " open Product" to set RM-1. Open Flashing Firmwareupdate ,select your Modell then select Dead USB Flashing and start it. Then wait...... Untill It Finished.. i've Done this Cpl of times and it worked Well, so this shld work.. Be sure to select "Dead USB Flashing" Then PRESS START.
Good Luck! Byee.

jutaime_shakira · 11-16-2006, 08:45

the one is for Europe and the other one is for Europe,middle east africa .

H@L9001 · 11-16-2006, 11:55

Quote:

Originally Posted by dinuksha_asela

Remove Sim and MMC-Card. Open Phoenix ,go to Manage Connection and set "No Connection " on first ,then open " open Product" to set RM-1. Open Flashing Firmwareupdate ,select your Modell then select Dead USB Flashing and start it. Then wait...... Untill It Finished.. i've Done this Cpl of times and it worked Well, so this shld work.. Be sure to select "Dead USB Flashing" Then PRESS START.
Good Luck! Byee.

I think the option "Dead USB Flashing" is for series 40; the phones of the series 60 haven't this option... So, in my RM-1 SW Update there isn't it :-( Or it is in some hyde panel? Thanks!

arybak · 11-17-2006, 12:07

Hi,

we im looking for firmware for Nokia N80 Internet Edition that i can upload via Phoenix to Nokia N80.

For example
V 4.0632.0.38
13-10-2006
RM 92

Productcode of N80 IE (bronze) is 0539548

H@L9001 · 11-17-2006, 12:11

Quote:

Originally Posted by H@L9001

I think the option "Dead USB Flashing" is for series 40; the phones of the series 60 haven't this option... So, in my RM-1 SW Update there isn't it :-( Or it is in some hyde panel? Thanks!

Today i'll go to a Nokia Service... I hope they have something better than a PC + Phoenix for updating the software...

simonmanju · 11-21-2006, 10:33

hi ihave n70 and updated it with lower version

now i am download this version can i update it please help me

its very urgent my id [email protected]

Quote:

Originally Posted by Gsmterror

Hi all

Download BB5 Flash Files

www.gsm-arena.dl.am

Have Fun

lucardel · 11-21-2006, 12:19

Quote:

hi ihave n70 and updated it with lower version

now i am download this version can i update it please help me

its very urgent my id [email protected]

did you make firmware downgrade ?really? so do you think there's no problem if i make the same with my n73?
maybe better official version firmware

kad-kad · 11-22-2006, 10:57

New major data package v 1.0 (MCU SW 3.0628.0.0.30) for Music Edition
http://www.uploading.com/en/files/EX...0_v...exe.html

quattrino · 11-22-2006, 11:53

hello. what version of phoenix is needed to flash this file?
have you also a service bulletin??? thanks!!!!!!

1tym · 11-23-2006, 05:09

I heard there is now the APAC v2 for E61, can anyone confirm and upload the firmware here please?
Someone was able to flash it and fix the problem with the Chinese Language using the most up to date version.

11-14-2006, 17:50	#451 (permalink)
H@L9001 Junior Member Join Date: Aug 2006 Age: 41 Posts: 9 Member: 340783 Status: Offline Thanks Meter: 0	Here it is (the new RM-1 firmware): http://forum.gsmhosting.com/vbb/arch.../t-347153.html Last edited by H@L9001; 11-14-2006 at 19:15.

11-17-2006, 12:07	#459 (permalink)
arybak Junior Member Join Date: Nov 2006 Location: Poland Posts: 33 Member: 391499 Status: Offline Thanks Meter: 1	Nokia N80 Internet Edition fimware looking Hi, we im looking for firmware for Nokia N80 Internet Edition that i can upload via Phoenix to Nokia N80. For example V 4.0632.0.38 13-10-2006 RM 92 Productcode of N80 IE (bronze) is 0539548

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
All nokia bb5 flash files download free	rajan nishchal	Nokia Base Band 5 ( BB-5 )	28	09-01-2017 08:39
Download Nokia BB5 Flash files	tanoli82	Nokia Hardware & Hardware Repair	0	01-16-2010 20:40
Nokia Bb5 Flash Files Download From Here.....	Chennairam	GSM Mobile Links	21	09-06-2009 02:20
Nokia Last BB5 flash file Download here free	F@RUK S	GSM Mobile Links	2	11-23-2008 10:58

11-15-2006, 02:10	#452 (permalink)
H@L9001 Junior Member Join Date: Aug 2006 Age: 41 Posts: 9 Member: 340783 Status: Offline Thanks Meter: 0	Hy guys, now, i've a dead 6630 During the flashing, i don't know why, windows has re-installed the usb driver (or maybe something else) and the firmware upgrade stopped I think it's not correct for the flashing... Now I can't do anithing; if I power on the phone it show me only a withe screen And if i connect the smarthphone "ON" to an unused USB port, Windows install this driver: "Nokia BB5 ADL Loader USB Generic". Can I do anything for my dead phone (unless go to a Nokia Point) Thanks, Mauro

11-16-2006, 08:45	#457 (permalink)
jutaime_shakira Major Poster Join Date: Sep 2006 Posts: 46 Member: 357579 Status: Offline Thanks Meter: 0	the one is for Europe and the other one is for Europe,middle east africa .

11-22-2006, 10:57	#463 (permalink)
kad-kad Freak Poster Join Date: May 2006 Location: Greece Thessaloniki Posts: 229 Member: 282530 Status: Online Thanks Meter: 20	New major data package v 1.0 (MCU SW 3.0628.0.0.30) for Music Edition http://www.uploading.com/en/files/EX...0_v...exe.html

11-22-2006, 11:53	#464 (permalink)
quattrino Crazy Poster Join Date: Aug 2006 Location: ITALY - SOUTHTYROL Age: 42 Posts: 57 Member: 335143 Status: Offline Thanks Meter: 1	hello. what version of phoenix is needed to flash this file? have you also a service bulletin??? thanks!!!!!!

11-23-2006, 05:09	#465 (permalink)
1tym Major Poster Join Date: May 2003 Posts: 48 Member: 29426 Status: Offline Thanks Meter: 0	I heard there is now the APAC v2 for E61, can anyone confirm and upload the firmware here please? Someone was able to flash it and fix the problem with the Chinese Language using the most up to date version.