Nokia E52 dead phone USB flash

[Inko]

Hi,

after a failed firmware update via Nokia Suite my E52 is dead now --> black display and only a short vibration after pressing the power on button. Therfore I've downloaded a current Phoenix (v2012.04.003.47798) release, a current NaviFirm Plus (v1.7) release and the current E52 firmare package (v081.003). Unfortunately there is no communication with the mobile after the firmware programming. Phoenix outputs the following log:

Flashing started
Creating product data items list
Product data items list created
Backup not required
Flashing phone
Initializing
Scanning image files...
Waiting for USB device...
Loading secondary boot code: 15168 bytes
Secondary boot loaded
BB Asic Index is: 00
Asic ID is: 000000030000022600010007600C192102011104
BB Asic Index is: 00
EM Asic ID is: 00001040
BB Asic Index is: 00
EM Asic ID is: 00001030
BB Asic Index is: 00
Public ID is: 1B800015FF5E0344584ADCC37EA7F99CA7F320A2
BB Asic Index is: 00
Asic Mode ID: 00
BB Asic Index is: 00
Hash: 25B977A055BE9B5DEC0C38A2A279C695
BB Asic Index is: 00
ROM ID: 3E273BF637BE26FA
BB Asic Index is: 00
Device type is: 05
Device Index is: 00
Manufacturer code: 0000
Device ID: 0000
Extended device ID: 0000
Revision ID: 0000
BB Asic Index is: 00
Device type is: 04
Device Index is: 00
Manufacturer code: FFFF
Device ID: 0000
Extended device ID: 0000
Revision ID: 0000
BB Asic Index is: 00
Device type is: 00
Device Index is: 00
Manufacturer code: 0020
Device ID: 0040
Extended device ID: 0000
Revision ID: 0031
BB Asic Index is: 00
Device type is: 00
Device Index is: 01
Manufacturer code: 0000
Device ID: 0001
Extended device ID: 0000
Revision ID: 0000
BB Asic Index is: 00
Device type is: 03
Device Index is: 00
Manufacturer code: 0020
Device ID: 0040
Extended device ID: 0000
Revision ID: 0031
Loading update server code: 868592 bytes
Update server loaded
Asic CMT: Start programming 172010 KB...
Asic CMT: Programming data sent: 0%
Asic CMT: Programming data sent: 10%
Asic CMT: Programming data sent: 20%
Asic CMT: Programming data sent: 30%
Asic CMT: Programming data sent: 40%
Asic CMT: Programming data sent: 50%
Asic CMT: Programming data sent: 60%
Asic CMT: Programming data sent: 70%
Asic CMT: Programming data sent: 80%
Asic CMT: Programming data sent: 90%
Asic CMT: Programming data sent: 100%
Programming complete
Asic CMT: Verifying communication to device...
Waiting for communication response: 25
Waiting for communication response: 24
Waiting for communication response: 23
Waiting for communication response: 22
Waiting for communication response: 21
Waiting for communication response: 20
Waiting for communication response: 19
Waiting for communication response: 18
Waiting for communication response: 17
Waiting for communication response: 16
Waiting for communication response: 15
Waiting for communication response: 14
Waiting for communication response: 13
Waiting for communication response: 12
Waiting for communication response: 11
Waiting for communication response: 10
Waiting for communication response: 9
Waiting for communication response: 8
Waiting for communication response: 7
Waiting for communication response: 6
Waiting for communication response: 5
Waiting for communication response: 4
Waiting for communication response: 3
Waiting for communication response: 2
Waiting for communication response: 1
Error 0x8401F121 communicating to phone. Unable to verify comm.
Warning: Unable to communicate to product after flashing
Starting to recover the phone
Recovering phone
Initializing
Scanning image files...
Phone recovery completed. Waiting for phone to boot up
Bootup successful
Verifying communication to product (before flash finalizing) 
Failed to verfy communication to product

After the 25 tries to communicate with the E52 there is a request from Phoenix to disconnect and reconnect the USB connection. This doesn't help and the whole process ends with following error message:

Flashing finalization failed. Do you like to retry the finalizing?

HRESULT 0x8421001c (-2078212068)

Firmware: Cannot verify communication to phone after flashing. Make sure that phone booted up correctly and retry.

Hope someone of you can help me out here. The battery should be OK --> it delivers roughly 3.74V so it is still the nominal voltage.

BR

[NOKIA_PLUS]

bro post this model type and product code i solve your problem

[Inko]

Hi,

thanks for the fast reply.

Model: E52-1 (Type: RM-469)
Code: 0591667

BR

[NOKIA_PLUS]

Bro Flash File Ver.81.3 Download and flash work 100% post result

[Inko]

I'm already using the 081.003 firmware package. I recharged the battery with another E52 (measured voltage is roughly 3.95V). Unfortunately I get the same result --> the flash procedure stops with an error.

Here is the procedure as I execute it:

1. start Phoenix and choose "NO CONNECTION"
2. File -> Open Product and choose "RM-469"
3. Flashing -> Firmware Update
4. choose Product Code (0591667) and tick "Dead phone USB flashing"
5. click "Refurbish"
6. wait until I get the request to connect the USB cable and to insert the battery (pressing the power button is not needed): the device manager lists the two devices "Nokia USB Flashing Generic" and "Nokia USB Flashing Parent"
7. after the programming process these devices disappear
8. after that there are 25 attempts to communicat with E52 (without success)
9. at the end there is a request to disconnect and reconnect the USB cable (the devices mentioned above appear for roughly 4 seconds in the device manager and disappear again)
10. the whole process is aborted with the error that no communication is possible with the E52

I also tried a second USB data cable (also a Nokia C-101 data cable). Furthermore I also used another USB port and also a WinXP x68 machine --> alsways the same result (current system is a Win7 x64). Does anybody know what else could be the reason for the error?

[achref977]

same problem with me ((

[dinnu]

help me urgent bro.......
i have nokia 5230
code:0585713
last 30 days back i sucessufuly flashed with 51.9.2 version by using { ufs3-hwk }downloading in navifrim
but in info its shows the mobel is 5238.....

and now the same i s hanging now and music player is not working >that why i tried to flash again today but its not working
1 st boot ok,,,,2 nd boot ok ...the problem was CNT FLASH WRITE DATA REQ FAIL........I TRIED WITH 51.9.2
AND 50.0.1
AND 50.6.1
AND I AM USING USB CABLE TO FLASH

AND I TRIED TO F BUS CABLE BUT IN THAT 1 ST BOOT ERROR IS COMING

AND NOW THE PHONE CONDITION IS DEAD ......PLSE HELP ME ,PLSE SAVE ME

ADVANCE IN THANKS FOR HELP

[ramdasraat]

help me bro i have a nokia c2-00 rm-704 i have tried to turn on java tck support and phone got bricked i have tried to flashwith phonix and iam getting an error
HRESULT 0x8421001c (-2078212068)

[prateek244024]

flash with same product code

[Csontos_Antal]

Please help me, too!

I have a similar problem

I have an E52 (RM-469, SW version: 091punkt004, made in Finland, so Skandinavian

language

pack), it worked, it's almost new, I tried to install Hungarian input language from a

praised source by flashing, but I got stucked, THE PHONE IS DEAD, only shakes one

little or long by trying turning it on, the bad flashing circumstances (custom fw of

45 MB with the copied Hungarian language edited with NokiaCooker by formatting the

rofs2 file, but during it there wasn't any error message) destroyed it



I've downloaded NokiaCooker, Phoenix, the firmware from Mediafire (the only fw

what fits is what I thought a long time), I have USB cable

The Refurbish process goes until the end, (first tried with SW Erase(?),

then Product Update, but no success) it seems the processes go without problem,

althought it's a little bit fast as described somewhere else (not 7-9 mins, but 2-3

mins) Without ENO file blue icon, with ENO yellow icon on a window with something

like this during flashing, refurbishing: 1 remove battery, 2 turn it on




I need to change the product code because they don't fit (the firmware and under the

battery, I hope the IC wasn't changed, how can I check if it's dead? Althought I

bought it new)



For the change of product code I need to let the phone be turned on with Phoenix, but

it's dead, any other sw?



(SO the problem is the trap of 21)



There is also a paying firmware on nokia-file for 7 USD, but it isn't sure that

the product code will fit, it's TURK lang pack

Does it worth to buy this firmware or a paying program what can change the product

code on dead phones??

Is it possible anyhow??

Any other solution??