nokia x6 phone startup failed contact retailer solution

[tabai_fr]

please any solicion x6 contact reteiler ??

[SHIBLU]

1st back up rpl & pm.
then just do factory setting in any box.
if not done then flash with higher version.
check security area.

[tabai_fr]

Switch-off the phone (Remove the battery and re-insert it, if necessary). Now Press and HOLD the GREEN (Call) key, RED (Call end) key and the Camera-capture key SIMULTANEOUSLY. While still pressing the above three keys press the power On/Off key, hold them until phone boots up.

[tabai_fr]

This is how to format Nokia 5230, 5800, 5233.

Here is the step-by-step instruction:
1. Switch off your phone
2. Hold call key (Green Button), Cancel button(Red key) and camera together at the same time..and switch on your phone.
That's it.Enjoy Format complete.!
Hope it worked.!

Please rate and subscribe.,;
-http://www.facebook.com/informaticonavalmoral

[ojail]

I did face this situation twice and solution was easy both times

the first case was that the battery connectors were a little lose
so I what I did was that I removed them and re-welded them back again
and that was it


the second case was treated with ATF after a clean flash with the latest version all what I did was to format drives like this:

[mikeheng]

the battery connector works for my x6..

thankyou

[Rise]

Contact retailer solution in hardware
Betty ic fault
Change betty ic or tiggle it
Solved 2 phones

[ayman-marei]

Waiting for a response from his subject

[manish_jain]

bro,post handset info logfile

[shafi816]

not working ..........

[nt57_1985]

Originally Posted by ojail

I did face this situation twice and solution was easy both times

the first case was that the battery connectors were a little lose
so I what I did was that I removed them and re-welded them back again
and that was it


the second case was treated with ATF after a clean flash with the latest version all what I did was to format drives like this:

Thank you sir the bsi image worked for me

[sunil8888]

nice solution dear good job

[lakshya243000]

also check 3rd leg of battery connecter value called BSI ( battery sense. if show nothing call me ... 9212412274

[mhassanrazabj]

the battery connector always works for me when log info are correct.

[tajinder]

Originally Posted by ojail

I did face this situation twice and solution was easy both times

the first case was that the battery connectors were a little lose
so I what I did was that I removed them and re-welded them back again
and that was it


the second case was treated with ATF after a clean flash with the latest version all what I did was to format drives like this:

thanks battery connecter works for me too.