pls help me.. nokia 5800 after flashing only nokia comes - GSM-Forum

MANGLOREGSM · 01-12-2011, 08:26

HI.... I have one nokia 5800 with working condition, it is having v11.00 .... i updated it to v52.0.07... now flashing completed.. but handset not coming to local mode.. only key light... if i switch on it only nokia comes.. then gets off.. pls help me... pls send me good files... thanka in advance...

omprakash9090 · 01-12-2011, 08:31

please post log

flash with dead usb in ,mx or atf with same product code

hope ur problem solved

bmmobiles · 01-12-2011, 08:43

try to flash with mxkey am sure it will be done

MANGLOREGSM · 01-12-2011, 13:07

HI I tried to flash with mx key ,flashing completede,, prob still same...

MANGLOREGSM · 01-12-2011, 13:10

pls help me..............................

MANGLOREGSM · 01-13-2011, 11:39

HI NOW AFTER FLASHING IN MXKEY HANDSET GETTING ON BUT PHONE SART UP FAILED, CONTACT RETAILER... NOW I UPDATED SPLOCK IN MXKEY... NOW HANDSET GETTING ON IN BETWEEN IT GETS RESTART...... SEE THE LOG PLS .... GIVE ME SOLUTION
Phone Type: RM-356 (Nokia 5800 XpressMusic)
SW Version: V ICPR72_10w25.3 11-10-10 RM-356 (c) Nokia
Imei plain: *****
Product Code: 0575586
ApeCoreSw: V 52.0.007
Language Pack:- not available.
SIMLOCK seems to be valid
SUPERDONGLE_KEY invalid!
- WD timer enabled, phone will reboot itself after 3 min.
CMLA_KEY seems to be valid
WMDRM_PD seems to be valid
SIMLOCK_TEST passed
SECURITY_TEST passed

Imei net: *****99
Version: SIMLOCK SERVER
Counter: 0/3, 0/10

CONFIG_DATA: 2440700000000000
PROFILE_BITS: 0000000000000000

BLOCK 1: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 2: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 3: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 4: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 5: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 6: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 7: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATAGIVE ME

sazr · 01-14-2011, 00:07

wright good pm with sx 4 auth

cyclone much better

nasirkhan1433 · 01-14-2011, 06:40

brother just repair superdongle with ppm authantication
will be ok

nasir

kkabhikabhi · 01-14-2011, 08:37

i think just flash with the same v wich u have before good luck

kkabhikabhi · 01-14-2011, 08:41

or flash with this
www.proshivki.org_rm_356_v21.0.025.rar download for free on file share letitbit.net

kkabhikabhi · 01-14-2011, 08:45

ok sorry sorry i dont read ur log u have prob

hear
SIMLOCK seems to be valid
SUPERDONGLE_KEY invalid!

just go in pm do repair sd then write pm

n plz post results

SHIJILFONOTLY · 01-14-2011, 08:49

Quote:

Originally Posted by MANGLOREGSM

HI NOW AFTER FLASHING IN MXKEY HANDSET GETTING ON BUT PHONE SART UP FAILED, CONTACT RETAILER... NOW I UPDATED SPLOCK IN MXKEY... NOW HANDSET GETTING ON IN BETWEEN IT GETS RESTART...... SEE THE LOG PLS .... GIVE ME SOLUTION
Phone Type: RM-356 (Nokia 5800 XpressMusic)
SW Version: V ICPR72_10w25.3 11-10-10 RM-356 (c) Nokia
Imei plain: *****
Product Code: 0575586
ApeCoreSw: V 52.0.007
Language Pack:- not available.
SIMLOCK seems to be valid
SUPERDONGLE_KEY invalid!
- WD timer enabled, phone will reboot itself after 3 min.
CMLA_KEY seems to be valid
WMDRM_PD seems to be valid
SIMLOCK_TEST passed
SECURITY_TEST passed

Imei net: *****99
Version: SIMLOCK SERVER
Counter: 0/3, 0/10

CONFIG_DATA: 2440700000000000
PROFILE_BITS: 0000000000000000

BLOCK 1: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 2: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 3: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 4: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 5: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 6: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 7: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATAGIVE ME

bro repair sd upload pm via super sd auth
post result

calhinha · 01-14-2011, 08:56

Download navifirm, then see your product code behind cellphone and search your correct flash, flash whit any tool, ufs,mxkey, doesnt metter the tool to flash.

In search zone you type the Product Code: 0575586 , it will apear the correct flash file to your cellphone.
When you flash you fone whit original flash all will be ok, if not pm me.

Download link: http://www.megaupload.com/?d=ZJCLCM30

MANGLOREGSM · 01-14-2011, 10:18

Ok... I will try. Thank you very much.

MANGLOREGSM · 01-14-2011, 12:42

hi.. in v52.0.7, product code 0575586 is not there. in below version its ther. now tel me wat do?

01-12-2011, 08:26	#1 (permalink)
MANGLOREGSM Freak Poster Join Date: Jan 2007 Location: MANGLORE-INDIA Posts: 262 Member: 422855 Status: Offline Sonork: 100.1601859 Thanks Meter: 40	pls help me.. nokia 5800 after flashing only nokia comes HI.... I have one nokia 5800 with working condition, it is having v11.00 .... i updated it to v52.0.07... now flashing completed.. but handset not coming to local mode.. only key light... if i switch on it only nokia comes.. then gets off.. pls help me... pls send me good files... thanka in advance...

01-12-2011, 08:31	#2 (permalink)
omprakash9090 Insane Poster Join Date: Mar 2010 Location: IN FRONT OF COMPUTER Posts: 82 Member: 1262616 Status: Offline Thanks Meter: 6	log plz please post log flash with dead usb in ,mx or atf with same product code hope ur problem solved

01-14-2011, 08:56	#13 (permalink)
calhinha No Life Poster Join Date: May 2009 Location: here and there!! Posts: 519 Member: 1039966 Status: Offline Thanks Meter: 148	Navifirm 0.4 fantastic tool to find correct flash Download navifirm, then see your product code behind cellphone and search your correct flash, flash whit any tool, ufs,mxkey, doesnt metter the tool to flash. In search zone you type the Product Code: 0575586 , it will apear the correct flash file to your cellphone. When you flash you fone whit original flash all will be ok, if not pm me. Download link: http://www.megaupload.com/?d=ZJCLCM30 Last edited by calhinha; 01-14-2011 at 09:03.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Seeking for flash nokia 5110 old version (3 version) can exchange for new	Tomas	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	10-14-2017 19:29
New Nokia Software!!!!!!!	Jefferson	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	52	12-30-2016 08:17
Need software upgrade for Nokia 5110	ptkrf	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	30	02-24-2016 10:21

01-12-2011, 08:43	#3 (permalink)
bmmobiles Insane Poster Join Date: Dec 2009 Posts: 94 Member: 1175162 Status: Offline Sonork: [email protected] Thanks Meter: 7	try to flash with mxkey am sure it will be done

01-12-2011, 13:07	#4 (permalink)
MANGLOREGSM Freak Poster Join Date: Jan 2007 Location: MANGLORE-INDIA Posts: 262 Member: 422855 Status: Offline Sonork: 100.1601859 Thanks Meter: 40	HI I tried to flash with mx key ,flashing completede,, prob still same...

01-12-2011, 13:10	#5 (permalink)
MANGLOREGSM Freak Poster Join Date: Jan 2007 Location: MANGLORE-INDIA Posts: 262 Member: 422855 Status: Offline Sonork: 100.1601859 Thanks Meter: 40	pls help me..............................

01-13-2011, 11:39	#6 (permalink)
MANGLOREGSM Freak Poster Join Date: Jan 2007 Location: MANGLORE-INDIA Posts: 262 Member: 422855 Status: Offline Sonork: 100.1601859 Thanks Meter: 40	HI NOW AFTER FLASHING IN MXKEY HANDSET GETTING ON BUT PHONE SART UP FAILED, CONTACT RETAILER... NOW I UPDATED SPLOCK IN MXKEY... NOW HANDSET GETTING ON IN BETWEEN IT GETS RESTART...... SEE THE LOG PLS .... GIVE ME SOLUTION Phone Type: RM-356 (Nokia 5800 XpressMusic) SW Version: V ICPR72_10w25.3 11-10-10 RM-356 (c) Nokia Imei plain: *** Product Code: 0575586 ApeCoreSw: V 52.0.007 Language Pack:- not available. SIMLOCK seems to be valid SUPERDONGLE_KEY invalid! - WD timer enabled, phone will reboot itself after 3 min. CMLA_KEY seems to be valid WMDRM_PD seems to be valid SIMLOCK_TEST passed SECURITY_TEST passed Imei net: ***99 Version: SIMLOCK SERVER Counter: 0/3, 0/10 CONFIG_DATA: 2440700000000000 PROFILE_BITS: 0000000000000000 BLOCK 1: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF BLOCK 2: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF BLOCK 3: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF BLOCK 4: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF BLOCK 5: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF BLOCK 6: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF BLOCK 7: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATAGIVE ME

01-14-2011, 00:07	#7 (permalink)
sazr No Life Poster Join Date: Nov 2005 Posts: 979 Member: 203352 Status: Offline Sonork: 100.1609650 Thanks Meter: 244	wright good pm with sx 4 auth cyclone much better

01-14-2011, 06:40	#8 (permalink)
nasirkhan1433 Freak Poster Join Date: Jan 2010 Location: india Posts: 378 Member: 1210415 Status: Offline Thanks Meter: 27	brother just repair superdongle with ppm authantication will be ok nasir

01-14-2011, 08:37	#9 (permalink)
kkabhikabhi Freak Poster Join Date: May 2007 Location: Mumbai, India Age: 41 Posts: 427 Member: 513417 Status: Offline Thanks Meter: 87	i think just flash with the same v wich u have before good luck

01-14-2011, 08:41	#10 (permalink)
kkabhikabhi Freak Poster Join Date: May 2007 Location: Mumbai, India Age: 41 Posts: 427 Member: 513417 Status: Offline Thanks Meter: 87	or flash with this www.proshivki.org_rm_356_v21.0.025.rar download for free on file share letitbit.net

01-14-2011, 08:45	#11 (permalink)
kkabhikabhi Freak Poster Join Date: May 2007 Location: Mumbai, India Age: 41 Posts: 427 Member: 513417 Status: Offline Thanks Meter: 87	ok sorry sorry i dont read ur log u have prob hear SIMLOCK seems to be valid SUPERDONGLE_KEY invalid! just go in pm do repair sd then write pm n plz post results

01-14-2011, 10:18	#14 (permalink)
MANGLOREGSM Freak Poster Join Date: Jan 2007 Location: MANGLORE-INDIA Posts: 262 Member: 422855 Status: Offline Sonork: 100.1601859 Thanks Meter: 40	Ok... I will try. Thank you very much.

01-14-2011, 12:42	#15 (permalink)
MANGLOREGSM Freak Poster Join Date: Jan 2007 Location: MANGLORE-INDIA Posts: 262 Member: 422855 Status: Offline Sonork: 100.1601859 Thanks Meter: 40	hi.. in v52.0.7, product code 0575586 is not there. in below version its ther. now tel me wat do?