Dead T10s - GSM-Forum

Mr.Who · 03-23-2002, 18:47

Hi guys!

I have dead one T10s.I tried to flash the phone with USPU 4.38 but when it writes "Erasing flash.." it waits few seconds and simply writes "Timeout!!!".In the meantime counter stays at 0%.
The same thing happened with 768.

What's the solution for this? I repaired A1018 with ATR 5.3 but with t10 I can't?

Please help!

Regards,

Mr.Who

hacker1gsm · 03-23-2002, 19:33

hi
chk the battry or may be your phone is dead by hardware not software

regards

Mr.Who · 03-23-2002, 20:44

Phone has died during the process that I mentioned.

Mr.Who

hacker1gsm · 03-23-2002, 20:47

ok man
contact me
icq 112906176

Mr.Who · 03-24-2002, 12:11

Hi!
Sorry, I didn't see your reply because I wasn't online. So I'll find you today on ICQ.

By the way, yesterday I had the same problem with GF 768 but I return it back to life on slower PC than mine. I couldn't do that with T10. USPU don't work correctly on AMD (1,4 GHz).

Best regards,

Mr.Who

Mr.Who · 03-24-2002, 19:23

To hacker1gsm

Thanks a lot man.

Regards,

Mr.Who

udai · 04-10-2002, 01:02

@HACKER1GSM I ALSO HAVE SAME PROBLEM MY T10..WENT DEAD WHEN I TRIED TO FLASH WITH USPU4.38...PL CAN YOU KINDLY HELP ME WITH SOLLUTION...THANKS &REGARDS...UDAI

MY ID..udai_electronics17@rediffmail.com

alejandrorg · 04-23-2002, 02:20

I have the same problem i think, i tried to convert into t18 but when finish the download flash process my phone dead and i am not be able to recovered (the flash was:Txxwest.rxx); the phone is 99w49 and LZT 126 1340 R1A.
Any body can help me??

Thanks

Mr.Who · 04-23-2002, 04:51

First, check your cable and battery.I was 100% sure that mine cable and battery was OK but I was wrong in both cases.
Battery must be full.
Then, your phone must respond on "Power on". Use USPU 4.38 for flashing and try to do it on slower machine.I revive GF 768 on P 200 MMX. Solved problem with T10 on my machine with ATR 5.3 .
That's my experience with Ericsson phones.

Friend of mine told me that there is no way to kill Ericsson.

Mr.Who

03-23-2002, 18:47	#1 (permalink)
Mr.Who Freak Poster Join Date: Jan 2002 Location: Bosnia&Herzegovina Age: 43 Posts: 108 Member: 8246 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	Dead T10s Hi guys! I have dead one T10s.I tried to flash the phone with USPU 4.38 but when it writes "Erasing flash.." it waits few seconds and simply writes "Timeout!!!".In the meantime counter stays at 0%. The same thing happened with 768. What's the solution for this? I repaired A1018 with ATR 5.3 but with t10 I can't? Please help! Regards, Mr.Who

04-23-2002, 02:20	#8 (permalink)
alejandrorg Junior Member Join Date: Apr 2002 Location: Spain Age: 43 Posts: 1 Member: 11248 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	t 10s dead I have the same problem i think, i tried to convert into t18 but when finish the download flash process my phone dead and i am not be able to recovered (the flash was:Txxwest.rxx); the phone is 99w49 and LZT 126 1340 R1A. Any body can help me?? Thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
dead t10	allservice	Old Ericsson Phones & Sony Phones	2	10-01-2001 21:36
Dead T10s.. please help ! Thanks	Salute	Old Ericsson Phones & Sony Phones	1	11-02-2000 02:50
dead t10	pau	Old Ericsson Phones & Sony Phones	2	08-01-2000 01:53
3 Semi-dead T10s	boukos	Old Ericsson Phones & Sony Phones	7	06-10-2000 17:50
Dead t10s after flashing	doublezero	Old Ericsson Phones & Sony Phones	3	04-16-2000 11:38

03-23-2002, 19:33	#2 (permalink)
hacker1gsm No Life Poster Join Date: Jul 2001 Location: EGYPT Posts: 942 Member: 5113 Status: Offline Thanks: 4 Thanked 11 Times in 9 Posts	hi chk the battry or may be your phone is dead by hardware not software regards

03-23-2002, 20:44	#3 (permalink)
Mr.Who Freak Poster Join Date: Jan 2002 Location: Bosnia&Herzegovina Age: 43 Posts: 108 Member: 8246 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	Phone has died during the process that I mentioned. Mr.Who

03-23-2002, 20:47	#4 (permalink)
hacker1gsm No Life Poster Join Date: Jul 2001 Location: EGYPT Posts: 942 Member: 5113 Status: Offline Thanks: 4 Thanked 11 Times in 9 Posts	ok man contact me icq 112906176

03-24-2002, 12:11	#5 (permalink)
Mr.Who Freak Poster Join Date: Jan 2002 Location: Bosnia&Herzegovina Age: 43 Posts: 108 Member: 8246 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	Hi! Sorry, I didn't see your reply because I wasn't online. So I'll find you today on ICQ. By the way, yesterday I had the same problem with GF 768 but I return it back to life on slower PC than mine. I couldn't do that with T10. USPU don't work correctly on AMD (1,4 GHz). Best regards, Mr.Who

03-24-2002, 19:23	#6 (permalink)
Mr.Who Freak Poster Join Date: Jan 2002 Location: Bosnia&Herzegovina Age: 43 Posts: 108 Member: 8246 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	To hacker1gsm Thanks a lot man. Regards, Mr.Who

04-10-2002, 01:02	#7 (permalink)
udai Freak Poster Join Date: May 2001 Location: india Age: 47 Posts: 305 Member: 4798 Status: Offline Sonork: 100.1617239 Thanks: 127 Thanked 6 Times in 6 Posts	@HACKER1GSM I ALSO HAVE SAME PROBLEM MY T10..WENT DEAD WHEN I TRIED TO FLASH WITH USPU4.38...PL CAN YOU KINDLY HELP ME WITH SOLLUTION...THANKS &REGARDS...UDAI MY ID..udai_electronics17@rediffmail.com

04-23-2002, 04:51	#9 (permalink)
Mr.Who Freak Poster Join Date: Jan 2002 Location: Bosnia&Herzegovina Age: 43 Posts: 108 Member: 8246 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	First, check your cable and battery.I was 100% sure that mine cable and battery was OK but I was wrong in both cases. Battery must be full. Then, your phone must respond on "Power on". Use USPU 4.38 for flashing and try to do it on slower machine.I revive GF 768 on P 200 MMX. Solved problem with T10 on my machine with ATR 5.3 . That's my experience with Ericsson phones. Friend of mine told me that there is no way to kill Ericsson. Mr.Who