T18 a little bit sleep

[jarod]

Hi!

I can't believe it...Why happened with me this? <img src="smile.gif" border="0"> <br />I have got a t18, 'cos it's freeze when I powered on. I push the power button and phone is on. Ask me for the PIN, but after this is freeze. I see the "Enter the PIN" and in the line of PIN stay "1". <br />The phone is freeze and is revive to only one thing: battery is down/up.<br />I have flashed with ATR and correct flashfile but is say insert correct card. I have unlocked, but it was dead. I have flashed again with the same flashfile and it was dead at once without insert correct card msg. <br />I have flashed third time, now is OK but it is freeze again with enter PIN under this line the "1" character.

What can I do?

thanks for the help

jrd

<FONT COLOR="#ffff00" SIZE="1">[ 16 December 2001 22:35: Message edited by: jarod ]</font>

[bigman10]

Hi,

I have the same problem, but my phone works on one provider. When i insert other provider's card my phone is very slow.

bigman<br />[email protected]

[jarod]

Hi!

Well, I had a lot to do at weekend <img src="biggrin.gif" border="0"> <br />I have tried with flashing this 'baby', hehe..

-Tried with ER2000 I got error message.<br />-with NE Tool after flash I got wrong software type message always<br />-with Flashtool from Ukraine the same msg like with NE tool<br />-with Saras workshop 2.2 after flash nothing happened. The soft wrote the checksum and done.<br />-with ATR 5.3 and 5.0 after flash at 99% ERROR03 message.<br />-with Allertool by Jethro after flash I got this message "Flashing done plug the next one" <br />very lovely, isn't it? <img src="biggrin.gif" border="0"> <img src="biggrin.gif" border="0">

Tomorrow I try with other battery, and if it not help then I give up <img src="biggrin.gif" border="0">

someone maybe have any idea?

jrd

<FONT COLOR="#ffff00" SIZE="1">[ 17 December 2001 19:42: Message edited by: jarod ]</font>

[jarod]

Hi!

Today I have got another battery and flash it. Wrong news, because the flash is OK and the phone is powered on but still have the problem!! I can't believe it, why?? <br />Maybe the eeprom is damaged? But how? <br />Nobody touched the eeprom...<br />Have anyone idea?

thanks

jrd

[ARS]

Try to change eeprom, i mean IC, not content of eeprom, and/or check for liquid/mechanical damage

[jarod]

Hi!

Now I think too, that isn't software problem.<br />But, I've flashed again and in second line the "1" is missing...why? <img src="biggrin.gif" border="0">

jrd

[ken]

For T1x it has two important parts of software,EEprom and flash.If you cannot solve ploblem with flash so try change EEprom from another phone.<br />Upload it to your phone and flash again and see what happen.<br />Good Luck..

[jarod]

Hi!

Ken, thanks to your helpfulness but I think isn't the solution.<br />I have uploaded some eeprom files from t18, t10 and after upload I flashed some different flashfile, but still here the problem. This phone was unlocked after 1.5 year, so I think not wrong unlock is the trouble.<br />I give up and i trow into rubbish <img src="biggrin.gif" border="0">

jrd

[aliwali]

use ATXX 2.2 super dupond modified<br />download from <br /><a href="http://tuniweb.com/sosgsm" target="_blank">www.tuniweb.com/sosgsm</a> <img src="cool.gif" border="0">

[jarod]

Hi!

Thanks, I have it and I've tried but nothing....

jrd