Proble to unlock T28 WORLD ver. 00W29 from Pacific Bell

[sashpeto]

This is not normal t28s , this is WORLD the difrence betwen phones is MHz the first work on 900/1800, second 900/1900 and is from USA Pacific Bell.
Any idea ???

[t28user]

Originally posted by sashpeto:
This is not normal t28s , this is WORLD the difrence betwen phones is MHz the first work on 900/1800, second 900/1900 and is from USA Pacific Bell.
Any idea ???

Honestly, I don't know much about unlocking and the mission of this message is just to share the experience.
I've got the T28world phone, also locked. The solution which many folks suggest (Workshop 2.2) got things even worse. Instead of one network lock with 5 tries to enter NCK I've got _all_four_locks_set_ with ZERO tries left on each of them. Fine. I've decided that I've got nothing to loose and flashed my phone with T28s binary ( dec 99 or something ). Funny, but all locks disappeared and I easily entered into the main menu. Unfortunately, no network was found Okay, I said and flashed back the original T28 world image ( 000531 0624 . Oops - I've got all f...ng locks again, restored together with ability of making calls )

So I suspect that I need some newer software which has been really tested with T28 world, not just with T28s.



[This message has been edited by t28user (edited 20 August 2000).]

[igor_m]

for T28user-
start datex software,connect phone with
soft,then choose unlock,then flash fase1,
then flash fase 2(choose *.rxx file),
and phone will be dead completly, then start
tool by pro and flash it with *.rxx file,
and phone will work ok!

[craftsman]

for t28user

I finally was able to download the flash for T28 world from your site. Like you I got all locks when flashing the phone.

for igor_m

I think in my workshop i only can select .bin not .rxx files...
Will the flashing work with NE-Tool 120?

[igor_m]

ofcouse only *.bin ,
select *.rxx file to kill flash!

[t28user]

Originally posted by igor_m:
for T28user-
start datex software,connect phone with
soft,then choose unlock,then flash fase1,
then flash fase 2(choose *.rxx file),
and phone will be dead completly, then start
tool by pro and flash it with *.rxx file,
and phone will work ok!

igor_m: Could you send me or at least give an URL of the very version of NE tool you used?

craftsman: To tell you the truth, that site has nothing to do with me

[Supergsm]

Unlock T28w is pretty easy, just download EEPROM, and get unlocked codes! Or clear lock flag, re-calculate the checksum.

[sashpeto]

What this mean ??? Do you want to help me or not ??? Ofcourse the first things that I do the download dump of eeprom but lock flag is difrent from t28s , where to find them ???
Pleace HELP if you can !
Bye
Thanx

Originally posted by Supergsm:
Unlock T28w is pretty easy, just download EEPROM, and get unlocked codes! Or clear lock flag, re-calculate the checksum.

[t28user]

Originally posted by Supergsm:
Unlock T28w is pretty easy, just download EEPROM, and get unlocked codes! Or clear lock flag, re-calculate the checksum.

I've no doubt of that. For anyone who aware of T28w EEPROM mapping and (or) has appropriate docs it's just piece-o-cake. But I (and not only me) don't have an access to them.
So, the question is - can you somehow share that knoweledge?

Best regards.

[This message has been edited by t28user (edited 22 August 2000).]

[igor_m]

Guys don't toch eeprom , never ,if
u can kill phones .
It's not easy to unlock !it's new version.

mail me I ll give u tool by pro

[sashpeto]

Hi, Igor I send you mail but not response for you ???
Pleace mail me tool by PRO
Thanx

Originally posted by igor_m:
Guys don't toch eeprom , never ,if
u can kill phones .
It's not easy to unlock !it's new version.

mail me I ll give u tool by pro