t20/29 powering on ? when conected? - GSM-Forum

FunLog · 09-16-2001, 17:51

I have strange problem with my cable , i have unlocked a lot of phones with it , but on some t20 , and t29 when i conect it to phone after few seconds it powers on !!?? this hapends with cable conected with comp or not , but after lot of pluging and powering on at some point phone doesnt power on and i can unlock !! <img src="smile.gif" border="0"> , on t28 / r310 , everthing is okej... What can be a solution ? some problem with power on pin? or...

Ps.. can someone send me the working t20/29 working pinout based on misiek interface..?

Regards..

HFP · 09-16-2001, 19:13

Hi! Connect cable without battery, press Unlock, when prog. say "press No...." - connect battery. Good luck. Peter.

Demon_Ok · 09-16-2001, 20:26

Hi. Open conector (to phone) check this

Pins 9 and 11 - short 7 - TX 6 - RX

if 9 and 11 pins conected to +5v from max232, remove this wire.

FunLog · 09-18-2001, 21:32

Tnx for the replay i will try it...

09-16-2001, 17:51	#1 (permalink)
FunLog Insane Poster Join Date: Nov 2000 Posts: 99 Member: 2603 Status: Offline Thanks Meter: 5	t20/29 powering on ? when conected? I have strange problem with my cable , i have unlocked a lot of phones with it , but on some t20 , and t29 when i conect it to phone after few seconds it powers on !!?? this hapends with cable conected with comp or not , but after lot of pluging and powering on at some point phone doesnt power on and i can unlock !! <img src="smile.gif" border="0"> , on t28 / r310 , everthing is okej... What can be a solution ? some problem with power on pin? or... Ps.. can someone send me the working t20/29 working pinout based on misiek interface..? Regards..

09-16-2001, 19:13	#2 (permalink)
HFP No Life Poster Join Date: Mar 2001 Location: Ukraine,Kiev Age: 48 Posts: 1,605 Member: 3529 Status: Offline Thanks Meter: 1	Hi! Connect cable without battery, press Unlock, when prog. say "press No...." - connect battery.<br />Good luck.<br />Peter.

09-16-2001, 20:26	#3 (permalink)
Demon_Ok No Life Poster Join Date: Mar 2001 Location: Kazakhstan Age: 48 Posts: 522 Member: 3528 Status: Offline Thanks Meter: 5	Hi.<br />Open conector (to phone) check this Pins<br />9 and 11 - short<br />7 - TX<br />6 - RX if 9 and 11 pins conected to +5v from max232, remove this wire.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
nokia 6500s it comes on when charging but dose not power on when u press on	4 u man	Nokia Hardware & Hardware Repair	3	04-06-2009 20:29
C 55 no power on , no conect with PC	suy	E-Gold Based Phones	8	03-05-2004 14:16
t100 not power on after flash, not power on when original cable is plug	GYZMO	VLSI, Conexant, Skyworks and Old Models	8	01-07-2004 00:34
T20 don't power on?	insidebga	Sony Ericsson Hardware Repair	5	12-29-2002 20:13
T20 dont power on	ARS	Sony Ericsson Hardware Repair	4	05-23-2002 01:59

09-18-2001, 21:32	#4 (permalink)
FunLog Insane Poster Join Date: Nov 2000 Posts: 99 Member: 2603 Status: Offline Thanks Meter: 5	Tnx for the replay i will try it...