T28 speaker not working... - GSM-Forum

dghersin · 01-15-2002, 15:44

...some help please, where to start?

THX Daniel

jivkobg · 01-15-2002, 17:55

Hi<br />rehot N800 ,you can see service manual on Landy page.

mansi · 01-16-2002, 13:07

hello there, <br />mostly speakers are not working because it is not connected proprly, just pull the 2 connectors with a small screw driver (raise them up), and whipe the speaker's connectors (clean them) and then try, mostly its not working because of this reson if it did not work.

regards <img src="cool.gif" border="0">

dghersin · 01-16-2002, 15:31

OK, i see some voltage cange on the speaker terminal, but no hearing. So, I'll try rehoting the 800...and thanx, see you.

Daniel

Corban · 01-16-2002, 15:47

Yes! Rehot N800 100% it's faulse! But Be careful - it's the BGA chip!

Best regards<br />Corban

Corban · 01-16-2002, 15:50

And....there is one else solution...If you don't have the soldering station you can just put something on N800 to push it closer to the mainboard....But in this case there is no warranty, that it stops to work again after a couple of days... <br />So good luck!

01-15-2002, 15:44	#1 (permalink)
dghersin Freak Poster Join Date: Dec 2000 Location: Croatia Posts: 225 Member: 2765 Status: Offline Thanks Meter: 12	T28 speaker not working... ...some help please, where to start? THX Daniel

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
c6000 speaker ways loudspeaker working but ear speaker not work	shani72	Chinese Models & Cloned Phones	3	06-19-2011 06:54
1200 speaker and way ok but speaker not working why ??????????????????????????	tiju kkm	Nokia Hardware & Hardware Repair	11	04-07-2010 01:19
E65_1 speaker not working help me speaker is ok	shani72	Nokia Hardware & Hardware Repair	3	11-14-2009 08:58
2310 speaker not working but loud speaker working?	albert139	Nokia Hardware & Hardware Repair	5	05-25-2009 21:19
t28 cable not working	sdimitri	Old Ericsson Phones & Sony Phones	5	07-17-2001 09:00

01-15-2002, 17:55	#2 (permalink)
jivkobg Freak Poster Join Date: Jun 2001 Location: Bulgaria Age: 50 Posts: 327 Member: 4891 Status: Offline Thanks Meter: 9	Hi<br />rehot N800 ,you can see service manual on Landy page.

01-16-2002, 13:07	#3 (permalink)
mansi No Life Poster Join Date: Jan 2002 Location: Jordan Age: 46 Posts: 767 Member: 8664 Status: Offline Sonork: 100.1573507 Thanks Meter: 56	hello there, <br />mostly speakers are not working because it is not connected proprly, just pull the 2 connectors with a small screw driver (raise them up), and whipe the speaker's connectors (clean them) and then try, mostly its not working because of this reson if it did not work. regards <img src="cool.gif" border="0">

01-16-2002, 15:31	#4 (permalink)
dghersin Freak Poster Join Date: Dec 2000 Location: Croatia Posts: 225 Member: 2765 Status: Offline Thanks Meter: 12	OK, i see some voltage cange on the speaker terminal, but no hearing. So, I'll try rehoting the 800...and thanx, see you. Daniel

01-16-2002, 15:47	#5 (permalink)
Corban Freak Poster Join Date: Dec 2001 Location: Ukraine Age: 50 Posts: 227 Member: 8000 Status: Offline Thanks Meter: 2	Yes! Rehot N800 100% it's faulse! But Be careful - it's the BGA chip! Best regards<br />Corban

01-16-2002, 15:50	#6 (permalink)
Corban Freak Poster Join Date: Dec 2001 Location: Ukraine Age: 50 Posts: 227 Member: 8000 Status: Offline Thanks Meter: 2	And....there is one else solution...If you don't have the soldering station you can just put something on N800 to push it closer to the mainboard....But in this case there is no warranty, that it stops to work again after a couple of days... <br />So good luck!