Unlock Ericcson A1018s - GSM-Forum

nicu5567 · 01-31-2005, 20:30

Help me please !

I need to unlock this phone and I don"t know how. Program and step !

Thanks very much !

ics_igrec_zet · 01-31-2005, 21:41

Use atr5.3 is good soft but take care, if u got wrong sim without sim inside u need to write firmware. Use search button, i don`t have this software at home, but u can look at www.mobile.box.sk for it.
BR, xyz

barretex · 02-13-2005, 01:06

First you need a FLASH cable. You can build it yourself. The schematics uses MAX232, but you also can build it using an old ISA multi-io card. (1488/1489 chips).
ATR 5.0 or 5.3 software is good..
Always test your cable/software carefully before flashing anything!
First read and save the phone's EEPROM with "READ EEPROM" button. You can check that EEPROM in PC whith "ericshowlock" -program and then enter revealed codes manually in phone.
If that didn't work the second stage is to use "UNLOCK PHONE" button in ATR 5.0/5.3 software. That unlocks everything except the user lock (default "0000").
If you for some reason cannot find the user lock with "ericshowlock", you must use "WRITE EEPROM" button in ATR 5.0/5.3. In that case you also need an appropriate EEPROM file.
Here is a link: http://www.legag.com/phone/erics/flashs.php
But remember: WRITING ALIEN EEPROM CHANGES IMEI,so you must change it back to your original with ATR 5.0/5.3 or use "REPAIR PHONE" button with your IMEI-code.
cheers

barretex

adel11 · 02-13-2005, 01:35

try to make this clip its easy

goog luck

*MaTeOoSh* · 02-13-2005, 01:57

Quote:

Originally Posted by barretex

First you need a FLASH cable. You can build it yourself. The schematics uses MAX232, but you also can build it using an old ISA multi-io card. (1488/1489 chips).
ATR 5.0 or 5.3 software is good..
Always test your cable/software carefully before flashing anything!
First read and save the phone's EEPROM with "READ EEPROM" button. You can check that EEPROM in PC whith "ericshowlock" -program and then enter revealed codes manually in phone.
If that didn't work the second stage is to use "UNLOCK PHONE" button in ATR 5.0/5.3 software. That unlocks everything except the user lock (default "0000").
If you for some reason cannot find the user lock with "ericshowlock", you must use "WRITE EEPROM" button in ATR 5.0/5.3. In that case you also need an appropriate EEPROM file.
Here is a link: http://www.legag.com/phone/erics/flashs.php
But remember: WRITING ALIEN EEPROM CHANGES IMEI,so you must change it back to your original with ATR 5.0/5.3 or use "REPAIR PHONE" button with your IMEI-code.
cheers

barretex

I can't imagine more complicated method. Just build / buy a cable and use ATR5 or Jethro ...

barretex · 02-13-2005, 02:39

"I can't imagine more complicated method. Just build / buy a cable and use ATR5 or Jethro ..."

Ok, sorry complicatation.

nicu5567 · 02-14-2005, 19:54

Thankyou very much ! I'ts works very good with ATR 5.0, Windows 98 in LAPTOP ARMADA 1500c with processor Intel 266MHz !
ATR 5.1,5.2,5.3 don't works !
Thank's !

01-31-2005, 20:30	#1 (permalink)
nicu5567 Junior Member Join Date: Jan 2005 Location: Romania Age: 65 Posts: 23 Member: 108901 Status: Offline Thanks Meter: 0	Unlock Ericcson A1018s Help me please ! I need to unlock this phone and I don"t know how. Program and step ! Thanks very much !

02-14-2005, 19:54	#7 (permalink)
nicu5567 Junior Member Join Date: Jan 2005 Location: Romania Age: 65 Posts: 23 Member: 108901 Status: Offline Thanks Meter: 0	Thankyou very much ! I'ts works very good with ATR 5.0, Windows 98 in LAPTOP ARMADA 1500c with processor Intel 266MHz ! ATR 5.1,5.2,5.3 don't works ! Thank's ! Last edited by nicu5567; 02-14-2005 at 19:57. Reason: Erorr editing.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How to unlock ericsson a1018s 99w34???	harpoon1622323	Old Ericsson Phones & Sony Phones	5	06-16-2011 07:09
unlock ericcson 2618s	fluxor	Old Ericsson Phones & Sony Phones	0	12-16-2008 09:04
Unlock ericsson a1018	FSC	Old Ericsson Phones & Sony Phones	9	04-01-2001 21:52
Unlock Ericsson a1018	FSC	Alcatel & TCL Old Models	0	02-11-2001 16:43
please help Unlock Ericsson A1018s	prosecutor	Old Ericsson Phones & Sony Phones	1	06-04-2000 14:47

01-31-2005, 21:41	#2 (permalink)
ics_igrec_zet No Life Poster Join Date: Feb 2004 Location: ROMANIA Age: 46 Posts: 861 Member: 55427 Status: Offline Thanks Meter: 7	Use atr5.3 is good soft but take care, if u got wrong sim without sim inside u need to write firmware. Use search button, i don`t have this software at home, but u can look at www.mobile.box.sk for it. BR, xyz

02-13-2005, 01:06	#3 (permalink)
barretex Junior Member Join Date: Sep 2004 Age: 44 Posts: 17 Member: 84221 Status: Offline Thanks Meter: 0	First you need a FLASH cable. You can build it yourself. The schematics uses MAX232, but you also can build it using an old ISA multi-io card. (1488/1489 chips). ATR 5.0 or 5.3 software is good.. Always test your cable/software carefully before flashing anything! First read and save the phone's EEPROM with "READ EEPROM" button. You can check that EEPROM in PC whith "ericshowlock" -program and then enter revealed codes manually in phone. If that didn't work the second stage is to use "UNLOCK PHONE" button in ATR 5.0/5.3 software. That unlocks everything except the user lock (default "0000"). If you for some reason cannot find the user lock with "ericshowlock", you must use "WRITE EEPROM" button in ATR 5.0/5.3. In that case you also need an appropriate EEPROM file. Here is a link: http://www.legag.com/phone/erics/flashs.php But remember: WRITING ALIEN EEPROM CHANGES IMEI,so you must change it back to your original with ATR 5.0/5.3 or use "REPAIR PHONE" button with your IMEI-code. cheers barretex

02-13-2005, 02:39	#6 (permalink)
barretex Junior Member Join Date: Sep 2004 Age: 44 Posts: 17 Member: 84221 Status: Offline Thanks Meter: 0	"I can't imagine more complicated method. Just build / buy a cable and use ATR5 or Jethro ..." Ok, sorry complicatation.