First Smart Unlocker Question? C975 - GSM-Forum

sockpuppetuk · 04-30-2005, 09:50

C975 locked to Orange
Smart unlocker box
Boot loader 0.6.1.0
SW R24_U_80.2F.61.02P

connect phone, press unlock.
phone powers down and goes into boot mode.
Shows above details plus

Battery OK
OK to Program
Transfer Mode : USB

Red E/G light comes on and that's it.

Any ideas please.

Have tried cable that came with box + one with phone.
Have also tried with battery and mains as power supply.

luskao · 04-30-2005, 12:13

Maybe the 9V battery doesn't work properly or is low battery...Did you tried with an adaptor??

BR

sockpuppetuk · 04-30-2005, 12:17

I did say at the bottom :
Have also tried with battery and mains as power supply.

Have just tried a E1000 and this does the same.

Dont think its the box though as I did a V600, V500, A835 & T720i with no problems.

I only paid out the extra to get this box over a normal V clip because it is supposed to do the new phones.

behnambehnam · 04-30-2005, 15:29

pls help me i have sx1 and need to phone code
my imei=352079003986856
and my mail behnam2bh@yahoo.co.uk

sockpuppetuk · 04-30-2005, 15:48

Well that was helpful, cheers for the advice.

Oh, no it wasn't was it .. infact it was just you hijacking my thread.

Jamieev · 04-30-2005, 18:45

Have you updated the box?

Aamir_Zia · 04-30-2005, 22:19

Quote:

Originally Posted by behnambehnam

pls help me i have sx1 and need to phone code
my imei=352079003986856
and my mail behnam2bh@yahoo.co.uk

u r a *************** ..

Are u MAD or WHAT !!!

Everywhere in the Forum you write abt Your SX1 Code ....

To SMods @

Banned this User ..

**SiRoYa** · 05-01-2005, 12:12

Quote:

Originally Posted by Aamir_Zia

u r a Bloody Son of a BITCH ..

Are u MAD or WHAT !!!

Everywhere in the Forum you write abt Your SX1 Code ....

To SMods @

Banned this User ..

u have no rites to abuse any user on forum weather he is noob

wbr
siroya

catik · 05-04-2005, 05:42

Quote:

Originally Posted by Aamir_Zia

u r a *************** ..

Are u MAD or WHAT !!!

Everywhere in the Forum you write abt Your SX1 Code ....

To SMods @

Banned this User ..

haha comic

GSM_Support · 05-04-2005, 14:10

Quote:

Originally Posted by sockpuppetuk

C975 locked to Orange
Smart unlocker box
Boot loader 0.6.1.0
SW R24_U_80.2F.61.02P

connect phone, press unlock.
phone powers down and goes into boot mode.
Shows above details plus

Battery OK
OK to Program
Transfer Mode : USB

Red E/G light comes on and that's it.

Any ideas please.

Have tried cable that came with box + one with phone.
Have also tried with battery and mains as power supply.

Unlocking note
Unlocking newer versions of V18x/V22x/C65x/C38x/E375 or C975/C980/V980/E1000 (Boot Loader 0.6.1.2) may require additional user intervention.
It may happen that E/G led still blinks after display turns off - it means that you have to turn the phone ON manually within 2-3 seconds after display turns off; alternatively you can try to unlock this newer version of V18x/V22x/C65x/C38x/E375 with battery charger on.

BR
Smart-clip team
www.smart-clip.com
www.GsmServer.com

sockpuppetuk · 05-04-2005, 20:50

It may happen that E/G led still blinks after display turns off

This is not what is happening, as I said .. it goes into boot loader mode fine, the E/G light then goes red and thats it.

Bypx · 05-04-2005, 20:56

Quote:

Originally Posted by Aamir_Zia

u r a *************** ..

Are u MAD or WHAT !!!

Everywhere in the Forum you write abt Your SX1 Code ....

To SMods @

Banned this User ..

Maybe is better to ban YOU, because he is a newbie, but he don't have insulted anyone, and you call him son of... ?

BR

sockpuppetuk · 05-08-2005, 08:00

So anyway, thanks to everyone totally ruining my thread.
but

I STILL CANNOT UNLOCK THIS PHONE.

Waste of money this box turned out to be.

trini_tdma · 05-10-2005, 05:37

did you try to update box??
maybe this wil help...

japunlock · 05-10-2005, 20:56

Quote:

Originally Posted by sockpuppetuk

It may happen that E/G led still blinks after display turns off

This is not what is happening, as I said .. it goes into boot loader mode fine, the E/G light then goes red and thats it.

when that happens to me i press the unlock button of the clup again and then the light starts to blink

04-30-2005, 09:50	#1 (permalink)
sockpuppetuk Freak Poster Join Date: Jan 2005 Age: 51 Posts: 171 Member: 104876 Status: Offline Thanks: 0 Thanked 5 Times in 3 Posts	First Smart Unlocker Question? C975 C975 locked to Orange Smart unlocker box Boot loader 0.6.1.0 SW R24_U_80.2F.61.02P connect phone, press unlock. phone powers down and goes into boot mode. Shows above details plus Battery OK OK to Program Transfer Mode : USB Red E/G light comes on and that's it. Any ideas please. Have tried cable that came with box + one with phone. Have also tried with battery and mains as power supply. Last edited by sockpuppetuk; 04-30-2005 at 10:24.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
Who will be the 1 (Gadget) to first answer some questions on Unlocking 1202?!!	dmaetrey	Nokia Digital Core Technology 4 ( DCT-4 )	3	07-17-2009 06:33
My first Nooox-Unlock- n73- questions	Dodger	NoooX Box	5	10-19-2008 00:25
please i need know the usb smart can unlock all c975 with any boot load or no	gsm4libya	Motorola P2K (USB-Smart)	6	04-08-2006 07:27
Smart unlocker to smart clip question?	san20176	Smart-Unlocker	16	03-21-2006 02:41
problem unlocking v975.C975 by smart clip	karouk	Smart-Clip	6	08-13-2005 09:38

04-30-2005, 12:13	#2 (permalink)
luskao Product Supporter Join Date: Sep 2004 Age: 28 Posts: 6,011 Member: 81703 Status: Offline Thanks: 841 Thanked 1,332 Times in 357 Posts	Maybe the 9V battery doesn't work properly or is low battery...Did you tried with an adaptor?? BR

04-30-2005, 12:17	#3 (permalink)
sockpuppetuk Freak Poster Join Date: Jan 2005 Age: 51 Posts: 171 Member: 104876 Status: Offline Thanks: 0 Thanked 5 Times in 3 Posts	I did say at the bottom : Have also tried with battery and mains as power supply. Have just tried a E1000 and this does the same. Dont think its the box though as I did a V600, V500, A835 & T720i with no problems. I only paid out the extra to get this box over a normal V clip because it is supposed to do the new phones.

04-30-2005, 15:29	#4 (permalink)
behnambehnam Junior Member Join Date: Apr 2005 Age: 30 Posts: 10 Member: 141365 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	pls help me i have sx1 and need to phone code my imei=352079003986856 and my mail behnam2bh@yahoo.co.uk

04-30-2005, 15:48	#5 (permalink)
sockpuppetuk Freak Poster Join Date: Jan 2005 Age: 51 Posts: 171 Member: 104876 Status: Offline Thanks: 0 Thanked 5 Times in 3 Posts	Well that was helpful, cheers for the advice. Oh, no it wasn't was it .. infact it was just you hijacking my thread.

04-30-2005, 18:45	#6 (permalink)
Jamieev Insane Poster Join Date: Apr 2005 Location: Scotland Age: 27 Posts: 93 Member: 138792 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	Have you updated the box?

05-04-2005, 20:50	#11 (permalink)
sockpuppetuk Freak Poster Join Date: Jan 2005 Age: 51 Posts: 171 Member: 104876 Status: Offline Thanks: 0 Thanked 5 Times in 3 Posts	It may happen that E/G led still blinks after display turns off This is not what is happening, as I said .. it goes into boot loader mode fine, the E/G light then goes red and thats it.

05-08-2005, 08:00	#13 (permalink)
sockpuppetuk Freak Poster Join Date: Jan 2005 Age: 51 Posts: 171 Member: 104876 Status: Offline Thanks: 0 Thanked 5 Times in 3 Posts	So anyway, thanks to everyone totally ruining my thread. but I STILL CANNOT UNLOCK THIS PHONE. Waste of money this box turned out to be.

05-10-2005, 05:37	#14 (permalink)
trini_tdma Freak Poster Join Date: May 2003 Location: USA Posts: 217 Member: 29243 Status: Offline Thanks: 0 Thanked 1 Time in 1 Post	did you try to update box?? maybe this wil help...