Smart-Unlocker red light blinking ? - GSM-Forum

Zingaro · 08-25-2005, 13:36

Hi,

I have a strange problem with my smart-unlocker - it has been working fine but the last few times I've tried to use it I've noticed the the red (E/G) led has started blinking. ( 1 second intervals ) I've tried a connecting a new battery and my power adapter (thinking it could be a low voltage warning) but still the same problem. I can still use it but if left for 1 second after the led (the same led) glows green (after completed unlock) it will start the unlock process over again unloess I unplug the phone immediately on the led lighting up.
I'm not sure if it's a coincidence but it's only started since I updated it last week.
I also have a smart-clip which works fine with both the batteries and the power adapter. Both the same version 2.15.

I've searched the Forum and found a similar problem but no solution - any advise please. ( It may be a one for GSM Server Team ) Thank you.

Regards, Zingaro.

GSM_Support · 08-25-2005, 15:09

Never use a battery to power up the Clip or Unlocker!...

BR
Smart-clip team
www.smart-clip.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

loneunlocker · 08-26-2005, 18:55

what do you mean don,t use a battery?
please explain?
br loneunlocker

karwos · 08-26-2005, 19:43

Replace or resolder the 20khz quartz

Zingaro · 08-26-2005, 23:01

@loneunlocker - I don't understand that either, I've always used a battery since my smart-clip was new (I bought it last year) - I only ever use my adapter when I'm updating.

I think I might have sussed it - I think the unlock button must be sticking intermittently - you can simulate the fault if you hold the unlock button down.
It's working for now - I guess I'll have to see how it goes.

cellularman · 09-01-2005, 07:43

but u get with the smartunlocker this : http://www.smart-clip.com/index_acc....=9v-to-battery

so what is it for ?

cellularman · 09-01-2005, 21:38

Quote:

Originally Posted by cellularman

but u get with the smartunlocker this : http://www.smart-clip.com/index_acc....=9v-to-battery

so what is it for ?

some one can help me please ???

GSM_Support · 09-02-2005, 11:38

This is an alternative connector, in case if you need to use your clip without main power. For all other cases use adapter...

Best Regards
Smart-clip team
www.smart-clip.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

08-25-2005, 13:36	#1 (permalink)
Zingaro Crazy Poster Join Date: Jun 2005 Posts: 52 Member: 151786 Status: Offline Thanks Meter: 0	Smart-Unlocker red light blinking ? Hi, I have a strange problem with my smart-unlocker - it has been working fine but the last few times I've tried to use it I've noticed the the red (E/G) led has started blinking. ( 1 second intervals ) I've tried a connecting a new battery and my power adapter (thinking it could be a low voltage warning) but still the same problem. I can still use it but if left for 1 second after the led (the same led) glows green (after completed unlock) it will start the unlock process over again unloess I unplug the phone immediately on the led lighting up. I'm not sure if it's a coincidence but it's only started since I updated it last week. I also have a smart-clip which works fine with both the batteries and the power adapter. Both the same version 2.15. I've searched the Forum and found a similar problem but no solution - any advise please. ( It may be a one for GSM Server Team ) Thank you. Regards, Zingaro. Last edited by Zingaro; 08-26-2005 at 23:22.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
K610 Red Light Blink After Unlock	faisal ch	Universalbox	10	12-15-2009 10:28
Help....K550i RED 53 Red Light Blinking	ashamsu	Cruiser Suite	2	03-12-2009 16:00
S500 red light blinking nd K850 keypad light	yayu76	SETool2	0	10-15-2008 18:09
W890i during unlocking dead red light blinking	lxa786	Seking Server	0	05-24-2008 18:25
K610i Red light blinking repair??	AKKA	Cruiser Suite	6	11-11-2006 12:35

08-25-2005, 15:09	#2 (permalink)
GSM_Support Product Supporter Join Date: Feb 2005 Location: GSMserver Team Posts: 36,980 Member: 121052 Status: Offline Sonork: 100.107126 Thanks Meter: 80,766	Never use a battery to power up the Clip or Unlocker!... BR Smart-clip team www.smart-clip.com www.GsmServer.com www.boot-loader.com www.smart-unlocker.com

08-26-2005, 18:55	#3 (permalink)
loneunlocker No Life Poster Join Date: Oct 2004 Age: 53 Posts: 508 Member: 88938 Status: Offline Thanks Meter: 16	what do you mean don,t use a battery? please explain? br loneunlocker

08-26-2005, 19:43	#4 (permalink)
karwos No Life Poster Join Date: Feb 2005 Location: Poland Age: 34 Posts: 4,943 Member: 117496 Status: Offline Sonork: 100.83919 Thanks Meter: 22,689	Replace or resolder the 20khz quartz

08-26-2005, 23:01	#5 (permalink)
Zingaro Crazy Poster Join Date: Jun 2005 Posts: 52 Member: 151786 Status: Offline Thanks Meter: 0	@loneunlocker - I don't understand that either, I've always used a battery since my smart-clip was new (I bought it last year) - I only ever use my adapter when I'm updating. I think I might have sussed it - I think the unlock button must be sticking intermittently - you can simulate the fault if you hold the unlock button down. It's working for now - I guess I'll have to see how it goes.

09-01-2005, 07:43	#6 (permalink)
cellularman No Life Poster Join Date: Jun 2005 Location: IN FRONT OF MY COMPUTER . Age: 47 Posts: 1,021 Member: 150246 Status: Offline Thanks Meter: 13	but u get with the smartunlocker this : http://www.smart-clip.com/index_acc....=9v-to-battery so what is it for ?

09-02-2005, 11:38	#8 (permalink)
GSM_Support Product Supporter Join Date: Feb 2005 Location: GSMserver Team Posts: 36,980 Member: 121052 Status: Offline Sonork: 100.107126 Thanks Meter: 80,766	This is an alternative connector, in case if you need to use your clip without main power. For all other cases use adapter... Best Regards Smart-clip team www.smart-clip.com www.GsmServer.com www.boot-loader.com www.smart-unlocker.com