Software bug and errors report - Page 2 - GSM-Forum

sheggmat · 07-22-2006, 15:06

pls i have problem with my ufs3 refuse to connect

sheggmat

pinheadZ · 07-22-2006, 17:47

Quote:

Originally Posted by galaxi

hiii

when i try to check for update To Avtivate My Box

this msg appear :Attachment 69066

This seems that you are trying to activate your box in a computer without internet connection. Please activate box in a computer WITH internet connection.

Best regards.

pinheadZ · 07-22-2006, 17:48

Quote:

Originally Posted by sheggmat

pls i have problem with my ufs3 refuse to connect

sheggmat

You mean you have problems with your UFS3???, or you have problems with UFS3 and TSMbox+ both connected??

suntluk · 07-26-2006, 02:50

I have trubo when unlock tsm7 ver22,show:
--------------------------------
Port opened OK
v22: Authentication ERROR, switching off the phone
please switch it on, and try again
TIP: Try changing phone version
--------------------------------
But tsm7 ver31 is working.
and I try unlock my tsm7 ver22 with TSmsux,It is working.
Please check this problem!

mrfixit · 07-31-2006, 23:18

i got my tsmbox+
i get driver installed and activated, then it says disconnect cable, i disconnect usb cable, now sys rdy mbus light blinking, what to do next?
box does not connect anymore, and I exactly followed instructions as displayed, please help, why do you instruct to disconnect cable?

mrfixit · 08-01-2006, 05:47

ok box work again after view minutes waiting and then connect again, all ok but pantech dont work, just keeps blinking rx tx, not connect to phone, maybe you post wrong pinout or ...? please help.

al0342p · 08-01-2006, 06:44

Pinout is in Pantech software.

Kind Regards

al0342p

mrfixit · 08-01-2006, 07:02

i cant get the c300 communicate with tsmbox pantech software, any ideas?
I work on this 24 pin connector for hours and it just wont connect, it seems that software freezes after pressing connect phone, phone must be on or off? I try all different ways but no luck on pantech c300. please help

mrfixit · 08-01-2006, 16:47

your pantech software dont work, software freezes as soon you press connect phone and only forced shutdown will make it work again, it wont unlock any c300 for sure, not even read flash work, what a waste of money, dont buy it guys! 450 usd down the drain. And where is support? no help offered either! I sent pm and nothing, I believe you guys never even got one pantech connected to your software. show a screen shot, if you can, post rj45 cable connection to pantech!

allal123 · 08-01-2006, 17:16

Quote:

Originally Posted by mrfixit

your pantech software dont work, software freezes as soon you press connect phone and only forced shutdown will make it work again, it wont unlock any c300 for sure, not even read flash work, what a waste of money, dont buy it guys! 450 usd down the drain. And where is support? no help offered either! I sent pm and nothing, I believe you guys never even got one pantech connected to your software. show a screen shot, if you can, post rj45 cable connection to pantech!

hi man
in my opinion open a new thread to specify your problem with pantech and you will have surely a good answer from TSM-TEAM and leave this thread only for the advertisement of the update

br

mrfixit · 08-01-2006, 17:47

advertisement is lies, all should know. and I bought it because of this ad.

PADERF · 08-02-2006, 00:49

Quote:

Originally Posted by mrfixit

your pantech software dont work, software freezes as soon you press connect phone and only forced shutdown will make it work again, it wont unlock any c300 for sure, not even read flash work, what a waste of money, dont buy it guys! 450 usd down the drain. And where is support? no help offered either! I sent pm and nothing, I believe you guys never even got one pantech connected to your software. show a screen shot, if you can, post rj45 cable connection to pantech!

this is your scren shoot

if you need help just detail correctly your problem and we will resolve it ..we don't lie to anyone and we don't need to do, we are not beginner man be more professional and descript your problem with screen shot and i will help you.

Regards,

allal123 · 08-02-2006, 00:53

Quote:

Originally Posted by PADERF

this is your scren shoot

if you need help just detail correctly your problem and we will resolve it ..we don't lie to anyone and we don't need to do, we are not beginner man be more professional and descript your problem with screen shot and i will help you.

Regards,

yes paderf it's good answer

al0342p · 08-02-2006, 01:44

Mr mrfixit

We never lie. Just contact us to solve your problems. Sometimes could be any bugs , but can be solve fast with customers´s details.

Kind Regards

al0342p

mrfixit · 08-02-2006, 17:54

maybe I was too fast to come to conclusion, i was working on that problem all night, and pantech software keeps freezing as soon I press "connect phone" , very frustrating, and I am sorry for doing so.

08-01-2006, 16:47	#24 (permalink)
mrfixit No Life Poster Join Date: Apr 2004 Location: MOON Posts: 5,858 Member: 60899 Status: Offline Thanks Meter: 792	your pantech software dont work, software freezes as soon you press connect phone and only forced shutdown will make it work again, it wont unlock any c300 for sure, not even read flash work, what a waste of money, dont buy it guys! 450 usd down the drain. And where is support? no help offered either! I sent pm and nothing, I believe you guys never even got one pantech connected to your software. show a screen shot, if you can, post rj45 cable connection to pantech! Last edited by mrfixit; 08-01-2006 at 17:00.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GsmFreeShop-client problems,bugs and propositions[Report Here]	GsmFreeShop	GsmFreeShop-SERVER	4	11-22-2008 12:15
What a update many soft are bug and error?	debmobile	HWK	4	09-30-2008 17:55

07-22-2006, 15:06	#16 (permalink)
sheggmat Freak Poster Join Date: Mar 2006 Location: Nija Posts: 170 Member: 244008 Status: Offline Thanks Meter: 3	pls i have problem with my ufs3 refuse to connect sheggmat

07-26-2006, 02:50	#19 (permalink)
suntluk Freak Poster Join Date: Apr 2003 Location: earth Age: 49 Posts: 288 Member: 27383 Status: Offline Thanks Meter: 1	I have trubo when unlock tsm7 ver22,show: -------------------------------- Port opened OK v22: Authentication ERROR, switching off the phone please switch it on, and try again TIP: Try changing phone version -------------------------------- But tsm7 ver31 is working. and I try unlock my tsm7 ver22 with TSmsux,It is working. Please check this problem!

07-31-2006, 23:18	#20 (permalink)
mrfixit No Life Poster Join Date: Apr 2004 Location: MOON Posts: 5,858 Member: 60899 Status: Offline Thanks Meter: 792	i got my tsmbox+ i get driver installed and activated, then it says disconnect cable, i disconnect usb cable, now sys rdy mbus light blinking, what to do next? box does not connect anymore, and I exactly followed instructions as displayed, please help, why do you instruct to disconnect cable?

08-01-2006, 05:47	#21 (permalink)
mrfixit No Life Poster Join Date: Apr 2004 Location: MOON Posts: 5,858 Member: 60899 Status: Offline Thanks Meter: 792	ok box work again after view minutes waiting and then connect again, all ok but pantech dont work, just keeps blinking rx tx, not connect to phone, maybe you post wrong pinout or ...? please help.

08-01-2006, 06:44	#22 (permalink)
al0342p Freak Poster Join Date: Feb 2003 Location: Worldwide Age: 43 Posts: 432 Member: 23312 Status: Offline Thanks Meter: 1	Pinout is in Pantech software. Kind Regards al0342p

08-01-2006, 07:02	#23 (permalink)
mrfixit No Life Poster Join Date: Apr 2004 Location: MOON Posts: 5,858 Member: 60899 Status: Offline Thanks Meter: 792	i cant get the c300 communicate with tsmbox pantech software, any ideas? I work on this 24 pin connector for hours and it just wont connect, it seems that software freezes after pressing connect phone, phone must be on or off? I try all different ways but no luck on pantech c300. please help

08-01-2006, 17:47	#26 (permalink)
mrfixit No Life Poster Join Date: Apr 2004 Location: MOON Posts: 5,858 Member: 60899 Status: Offline Thanks Meter: 792	advertisement is lies, all should know. and I bought it because of this ad.

08-02-2006, 01:44	#29 (permalink)
al0342p Freak Poster Join Date: Feb 2003 Location: Worldwide Age: 43 Posts: 432 Member: 23312 Status: Offline Thanks Meter: 1	Mr mrfixit We never lie. Just contact us to solve your problems. Sometimes could be any bugs , but can be solve fast with customers´s details. Kind Regards al0342p

08-02-2006, 17:54	#30 (permalink)
mrfixit No Life Poster Join Date: Apr 2004 Location: MOON Posts: 5,858 Member: 60899 Status: Offline Thanks Meter: 792	maybe I was too fast to come to conclusion, i was working on that problem all night, and pantech software keeps freezing as soon I press "connect phone" , very frustrating, and I am sorry for doing so.