2 bad brand new cables? no chance!

[formative]

Hello,

I am trying to unlock and flash nokia 2760 but I got: Terminated with error: RX High after BSI Low, probably bad cable [7F000004].7E00011E.00000102.0000020C.00011220.00000E00.0001 11A2.00011510.00011A83

I thought it was my bad fbus cable so I bought another cable, easy flash this time.
Unfortunately the same error occurs when I try to unlock the phone. The whole log is:

TUniversalForm 2.6.8.1941 started at: 2009-01-15 10:51:30
--------------------------------------------------------------------------------
MCU Boot Version: 1.069, and up to date.
SMCU Boot Version: 1.34, and up to date.
Authenticating software...
Device opened at USB->Universal Box [UBR726UK]

TSelfUpdateThread 2.6.8.1941 started at: 2009-01-15 10:51:31
--------------------------------------------------------------------------------
MCU Boot Version: 1.069, and up to date.
SMCU Boot Version: 1.34, and up to date.
Connecting to server: Main
Receiving latest versions...
All available algos are up to date.
Current local filepack version: 4.92 is up to date.
Current local executable version: 2.6.8.1941 is up to date.
MCU Boot Version: 1.069, and up to date.
SMCU Boot Version: 1.34, and up to date.
--------------------------------------------------------------------------------
TSelfUpdateThread 2.6.8.1941 finished at: 2009-01-15 10:51:34

Done.

TDCT4UnlockThread 2.6.8.1941 started at: 2009-01-15 10:51:41
--------------------------------------------------------------------------------
MCU Nokia Version: 1.126, and up to date.
SMCU Nokia Version: 1.42, and up to date.
Initializing phone...
Output power at Line1 3,93V is in range of: 4,00V ±10,0%
Reading Info...
MCU Version: V 05.61 Date: 18-04-08 Type: RM-258 (2760 (Asia/Europe)) Additional_1: (c) Nokia [Nokia 2760 (Asia/Europe) CABLE 2760]
PPM Version: V 05.61 Date: 18-04-08 Type: RM-258 (2760 (Asia/Europe)) Additional_1: (c) Nokia Pack: AE
Product code: 0572420
Production serial: JG3867147
Hardware version: 5000
Original IMEI: 356865-02-********
IMEI: 356865-02-********
Asic type: 11
Profile bits: 800000000001000B
Lockinfo: 2341000000000000
Lock version: 1
SIMLock service: SIMLOCK SERVER [010000060C08]
Writing SP info
Failed, patching software...
Connecting to server: Main
Asking service availability...
Connecting to server: Main
Credits: 20
Credits left: 20
Input power: 4,82V OK.
--------------------------------------------------------------------------------
TDCT4UnlockThread 2.6.8.1941 finished at: 2009-01-15 10:54:22

Terminated with error: RX High after BSI Low, probably bad cable [7F000004].7E00011E.00000102.0000020C.00011220.00000E00.0001 11A2.00011510.00011A83
MCU Boot Version: 1.069, and up to date.
SMCU Boot Version: 1.34, and up to date.
Device opened at USB->Universal Box [UBR726UK]
--------------------------------------------------------------------------------
TUniversalForm 2.6.8.1941 finished at: 2009-01-15 10:55:08

Please help!

thanks in advance,

formative

[Ja\/\/aD]

Please try to use EASY FLASH CABLE
other wise you need to buy new good cable for this operation!!!

[.:GSM International:.]

Originally Posted by Ja\/\/aD

Please try to use EASY FLASH CABLE
other wise you need to buy new good cable for this operation!!!

And here we have a typical example of UB product supporters NOT bothering to read posts fully!

The guy had said that he had BOTH NEW FBUS AND EASY CABLES for this operation, but neither worked!


@ formative

I have this problem with jsut about EVERY Dct4+ handset i unlock, but here is way round it.

When box is trying to boot phone, quickly remove and replug cable, or battery, and press power on handset, eventually after few tries, it will work!

[giti2k]

just cut with a knife around the charge plug on your easy flash cable and solder a cable from +, put a crocodile on the other side and put the crocodile on the + battery connector of phone.

[yunaced]

i also encounter this problem even with new cables,thanks GSM international for a nice info