2600c-2 rm-340 dct4+ unlock
 

2600c-2 rm-340 dct4+ unlock unıversalbox team but phone dead pls help me :confused: 2600c-2 not supported ??

Flash With any Of these version and then do unlock
Nokia 2600 classic: RM-340 (5.21, 5.22)


Regards
F@iSaL

Help!!!!
 

Hi there I have the same problem with a 2600-c, I clicked Unlock then the phone dosent come on. Please could you give me instructions to flash this phone as I clicked on the flash tab but the firmware version that u stated is available here is my screenshot.

Please any help apricatied

What was the condition of phones when it comes to you.

First Update Your Box Then Flash with Lower Supported Version
Press Unlock button . I hope Your problem will be Fine


Regards
F@iSaL

My box is fully updtated, Every time I try to select phone model & firmware from drop down list nothing comes up, The version for this phone is RM-340 and I think I'll be flashing with 5.21? Is that right?
Please Reply A.S.A.P

Thanks
Auto1

Please Help!!!!
 

Ok I tried to flash the phone & this came up:

DCT4 [DCT4 ALGORITHM] PPM File: rm340__05.22.ppm_ae 2 767 kB
Version: V 05.22 Date: 31-01-08 Type: RM-340 (Unknown) Additional_1: (c) Nokia Pack: AE
Languages: English, French, German, Italian
MSB: [01]
Speed: [100k, 6500k, 6500k, 51k] Baud.
Supported Hardwares: [3160, 3161, 3162, 3164, 3166]
DCT4 [DCT4 ALGORITHM] UCP File: rm340__05.22.image_virgin_uk 6 916 kB
MSB: [02]
Speed: [100k, 6500k, 6500k, 51k] Baud.
Supported Hardwares: [3160, 3161, 3162, 3164, 3166]
DCT4 [DCT4 ALGORITHM] MCU File: rm340__05.22.mcusw 10 953 kB
MSB: [01]
Speed: [100k, 6500k, 6500k, 51k] Baud.
Supported Hardwares: [3160, 3161, 3162, 3164, 3166]
TDCT4FlashPhoneThread started at: 2008/07/13 12:38:36
--------------------------------------------------------------------------------
MCU Nokia Version: 1.124, and up to date.
SMCU Nokia Version: 1.42, and up to date.
Input power: 12.09V OK.
Hardware ID: 3162
Boot Loader: u3_2nd.fia 2 kB
Version: 4.69.0
Supported Hardwares: [3040, 2292, 3162, 3166, 316A]
Input power: 12.09V OK.
Hardware ID: 3162
Boot Loader: u3_2nd.fia 2 kB
Version: 4.69.0
Supported Hardwares: [3040, 2292, 3162, 3166, 316A]
Max Flash Devices: 2
Flash ID 1: 00EC2208 - 0000 Rev: 9121 Manufacturer: Samsung MSB: 01 SectorSize: 0x020000
Flash ID 2: 00EC2208 - 0000 Rev: 9121 Manufacturer: Samsung MSB: 02 SectorSize: 0x020000
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flash Loader: u3_amd.fia 29 kB
Version: 4.69.0
Supported Hardwares: [3040, 2292, 3162, 3166, 316A]
ASIC Type: 11
MSID: 84-E25671C53FF09BA71D15FA65
CobbaID: 000BCD21; 3B8ADA60
FAID: 0C527C0D0BE1F760C087FA2A
Erase time: 36,8 sec.
Flashing MCU file: rm340__05.22.mcusw
--------------------------------------------------------------------------------
TDCT4FlashPhoneThread finished at: 2008/07/13 12:40:38
Terminated with error: 7F000001.7E000109.00000102.00000218.00013002.Flash ing error, probably faulty chip [000111BE].00011570
MCU Boot Version: 1.069, and up to date.
SMCU Boot Version: 1.34, and up to date.
Device opened at USB->Universal Box [UBQYN***]

Please HELP what do I do next????

hello.. maybe froblem ur cable our check ur connection ur phone...


regards

But I've used this cable on loads of nokia's before and they unlocked fine, I'm using 2630 Fbus cable, should I be using USB cable too?

Thanx........... brob for ur good instruction. and you can unlock any latest dct-4 with jaff but u must have the proper mcu file... like to match it with the installed one and then you can easily unlock. rehan khan

INsalled one mean which is already installed in ur phone, as you can check with *hash0000hash and so on

Thanks for propose 5,22 succsefully


thank you all

1- Backup PM
2- flash PM RM-340
3- full flash v.5.61
4- Unlock that Universal Box
5- restore Backup PM original.

tested 10000000000 %