3660 flashing problem

[mzi3807]

I have flash 3660 phone. It stop at the last area. what is problem??

uni log:
MCU Nokia Version: 1.124, and up to date.
SMCU Nokia Version: 1.42, and up to date.
Input power: 12.16V OK.
Hardware ID: 1081
Boot Loader: w3_2nd.fia 4 kB
Version: 4.69.0
Supported Hardwares: [1080, 1081]
Max Flash Devices: 4
Flash ID 1: 0001267E - 0002 Rev: 0110 Manufacturer: AMD MSB: 00 SectorSize: 0x010000
Flash ID 2: 0001267E - 0002 Rev: 0110 Manufacturer: AMD MSB: 02 SectorSize: 0x010000
Flash ID 3: 0001267E - 0002 Rev: 0110 Manufacturer: AMD MSB: 04 SectorSize: 0x010000
Flash ID 4: 00000001 - 0000 Rev: 0000 Manufacturer: Unused MSB: 06 SectorSize: 0x000001
Signature: C90000EA700100EA730100EA760100EA
Flash Loader: w3_amd.fia 32 kB
Version: 4.69.0
Supported Hardwares: [1080, 1081]
ASIC Type: 5
MSID: 84-AB491AEFC6BC2E7666FEBB14
CobbaID: 009AD26B; 2984DA7E
FAID: 99D7C8FC5996B7C603896BCF
CBUS Loader: w3_cbusb.fia 8 kB
Version: 4.69.0
Supported Hardwares: [1080, 1081]
Erase time: 2:17,4 sec.
Flashing MCU file: Nhl83050.8C1
Flash time: 4:24,1 sec.
After MCU Flash Delay: 5000 msec.
Input power: 12.20V OK.
Hardware ID: 1081
Boot Loader: w3_2nd.fia 4 kB
Version: 4.69.0
Supported Hardwares: [1080, 1081]
Max Flash Devices: 4
Flash ID 1: 0001267E - 0002 Rev: 0110 Manufacturer: AMD MSB: 00 SectorSize: 0x010000
Flash ID 2: 0001267E - 0002 Rev: 0110 Manufacturer: AMD MSB: 02 SectorSize: 0x010000
Flash ID 3: 0001267E - 0002 Rev: 0110 Manufacturer: AMD MSB: 04 SectorSize: 0x010000
Flash ID 4: 00000001 - 0000 Rev: 0000 Manufacturer: Unused MSB: 06 SectorSize: 0x000001
Signature: C90000EA700100EA730100EA760100EA
Flash Loader: w3_amd.fia 32 kB
Version: 4.69.0
Supported Hardwares: [1080, 1081]
MSID: 84-AB491AEFC6BC2E7666FEBB14
CobbaID: 009AD26B; 2984DA7E
FAID: 99D7C8FC5996B7C603896BCF
Erase time: 10,3 sec.
Flashing PPM file: Nhl83050.832
Flash time: 17,4 sec.
Total time: 7:56,2 sec.
After Flash Delay: 15000 msec.
Initializing phone...
Output power at Line1 3.95V is in range of: 4.00V ±10.0%
Phone powered.
--------------------------------------------------------------------------------
TDCT4FlashPhoneThread finished at: 2008/05/04 09:31:27

Terminated with error: 00010071.00015018.00011910
MCU Boot Version: 1.069, and up to date.
SMCU Boot Version: 1.34, and up to date.
Device opened at USB->Universal Box

[EIGY]

hello Ma8.
1. read UEM.
2. Save RPL.
3. Erase flash.
4. Full Flash with PM.
5. Unlock.
6. Format.
7. All Set Defalt.
If can not be flash.
You try Re-ball Flash Chip.
Then try again 3 to 7.
If same problem It is mean brockn Flash chip. Sometime UEM.


B.R.
EIGY.