5200 After full flash-After earase flash phone signature show 555555555 - GSM-Forum

amol_sm · 07-30-2008, 17:35

Hello to all,
I face one dead 5200 phone. I try to flash the phone. Phone take flash OK but alway's it's signature show 555555555555.
Also i full earase flash the phone but after that signature is same. Now phone still is dead now not power on. OR not show Local mode on display.
Take a look flashing log.

Code:

MCU Nokia Version: 1.124, and up to date.
SMCU Nokia Version: 1.42, and up to date.
Flashing file:
BB5 [BB5 ALGORITHM] MCU File: rm174__05.00.mcusw 14 821 kB
 Speed: [3250k, 6500k, 6500k, 98k] Baud.
 Supported Hardwares: [0103192101001101, 010C192101001101]
Input power: 4.78V OK.
Output power at Line1 3.92V is in range of: 4.00V ±10.0%
Boot Loader: RAP3Gv3_2nd_fps8.fg 15 kB
 Version: 1.20.2
 Supported Hardwares: [0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002]
Max Flash Devices: 1
Flash ID 1: 00000000 - 0000 Rev: 0000 Manufacturer: Unused MSB: 00 SectorSize: 0x010000
Signature: 55555555555555555555555555555555
Flash Loader: RAP3Gv3_algo_fps8.fg 63 kB
 Version: 1.12.5
 Supported Hardwares: [0003192101002000, 000C192101002000, 0003192101002100, 000C192101002100, 0003192101002200, 000C192101002200, 0003192101012200, 000C192101012200, 0103192101001101, 010C192101001101, 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002]
Asic ID: 000000010000022600010006010C192101001101
EM Asic ID: 00000232
EM Asic ID: 00000353
Public ID: 2680000210716056A1076EF816CE61BED6F40855
Asic Mode ID: 00
Hash: BAF3A9C3DBFA8454937DB77F2B8852B1
ROM ID: 191EC665DFAAF68F
Erase time: 47,1 sec.
Writing flash...
After MCU Flash Delay: 5000 msec.
Flashing file:
BB5 [BB5 ALGORITHM] UCP File: rm174__05.00.image_w 3 268 kB
 Speed: [3250k, 6500k, 6500k, 98k] Baud.
 Supported Hardwares: [0103192101001101, 010C192101001101]
Boot Loader: RAP3Gv3_2nd_fps8.fg 15 kB
 Version: 1.20.2
 Supported Hardwares: [0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002]
Max Flash Devices: 1
Flash ID 1: 00000000 - 0000 Rev: 0000 Manufacturer: Unused MSB: 00 SectorSize: 0x010000
Signature: 55555555555555555555555555555555
Flash Loader: RAP3Gv3_algo_fps8.fg 63 kB
 Version: 1.12.5
 Supported Hardwares: [0003192101002000, 000C192101002000, 0003192101002100, 000C192101002100, 0003192101002200, 000C192101002200, 0003192101012200, 000C192101012200, 0103192101001101, 010C192101001101, 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002]
Asic ID: 000000010000022600010006010C192101001101
EM Asic ID: 00000232
EM Asic ID: 00000353
Public ID: 2680000210716056A1076EF816CE61BED6F40855
Asic Mode ID: 00
Hash: BAF3A9C3DBFA8454937DB77F2B8852B1
ROM ID: 191EC665DFAAF68F
Erase time: 38,7 sec.
Writing flash...
Flashing file:
BB5 [BB5 ALGORITHM] PPM File: rm174__05.00.ppm_w 4 080 kB
 Languages: English, Chinese Trad, Chinese Simpl, Hindi
 Speed: [3250k, 6500k, 6500k, 98k] Baud.
 Supported Hardwares: [0103192101001101, 010C192101001101]
Boot Loader: RAP3Gv3_2nd_fps8.fg 15 kB
 Version: 1.20.2
 Supported Hardwares: [0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002]
Max Flash Devices: 1
Flash ID 1: 00000000 - 0000 Rev: 0000 Manufacturer: Unused MSB: 00 SectorSize: 0x010000
Signature: 55555555555555555555555555555555
Flash Loader: RAP3Gv3_algo_fps8.fg 63 kB
 Version: 1.12.5
 Supported Hardwares: [0003192101002000, 000C192101002000, 0003192101002100, 000C192101002100, 0003192101002200, 000C192101002200, 0003192101012200, 000C192101012200, 0103192101001101, 010C192101001101, 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002]
Asic ID: 000000010000022600010006010C192101001101
EM Asic ID: 00000232
EM Asic ID: 00000353
Public ID: 2680000210716056A1076EF816CE61BED6F40855
Asic Mode ID: 00
Hash: BAF3A9C3DBFA8454937DB77F2B8852B1
ROM ID: 191EC665DFAAF68F
Erase time: 13,5 sec.
Writing flash...
Total time: 12:18,2 sec.
After Flash Delay: 15000 msec.
Initializing phone...
Output power at Line1 3.92V is in range of: 4.00V ±10.0%
TBB5FlashPhoneThread finished at: 2008/07/30 22:02:59
Terminated with error: 00010071.00015018.00011910
MCU Boot Version: 1.069, and up to date.
SMCU Boot Version: 1.34, and up to date.
Device opened at USB->Universal Box [UB***XXY]

What i do for this problem . . . .?

MobilesDoctor · 07-30-2008, 18:34

Erase your Phone with 32Mb Erase File , Full Flash with latest version ,If You have back then write it
otherwise you need ask to rpl Service ,after write Rpl Make SX4 and Write Pm with out 308

Regards
F@iSaL

rajinder1978 · 07-30-2008, 18:35

Quote:

Originally Posted by amol_sm

Hello to all,
I face one dead 5200 phone. I try to flash the phone. Phone take flash OK but alway's it's signature show 555555555555.
Also i full earase flash the phone but after that signature is same. Now phone still is dead now not power on. OR not show Local mode on display.
Take a look flashing log.

Code:

MCU Nokia Version: 1.124, and up to date.
SMCU Nokia Version: 1.42, and up to date.
Flashing file:
BB5 [BB5 ALGORITHM] MCU File: rm174__05.00.mcusw 14 821 kB
 Speed: [3250k, 6500k, 6500k, 98k] Baud.
 Supported Hardwares: [0103192101001101, 010C192101001101]
Input power: 4.78V OK.
Output power at Line1 3.92V is in range of: 4.00V ±10.0%
Boot Loader: RAP3Gv3_2nd_fps8.fg 15 kB
 Version: 1.20.2
 Supported Hardwares: [0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002]
Max Flash Devices: 1
Flash ID 1: 00000000 - 0000 Rev: 0000 Manufacturer: Unused MSB: 00 SectorSize: 0x010000
Signature: 55555555555555555555555555555555
Flash Loader: RAP3Gv3_algo_fps8.fg 63 kB
 Version: 1.12.5
 Supported Hardwares: [0003192101002000, 000C192101002000, 0003192101002100, 000C192101002100, 0003192101002200, 000C192101002200, 0003192101012200, 000C192101012200, 0103192101001101, 010C192101001101, 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002]
Asic ID: 000000010000022600010006010C192101001101
EM Asic ID: 00000232
EM Asic ID: 00000353
Public ID: 2680000210716056A1076EF816CE61BED6F40855
Asic Mode ID: 00
Hash: BAF3A9C3DBFA8454937DB77F2B8852B1
ROM ID: 191EC665DFAAF68F
Erase time: 47,1 sec.
Writing flash...
After MCU Flash Delay: 5000 msec.
Flashing file:
BB5 [BB5 ALGORITHM] UCP File: rm174__05.00.image_w 3 268 kB
 Speed: [3250k, 6500k, 6500k, 98k] Baud.
 Supported Hardwares: [0103192101001101, 010C192101001101]
Boot Loader: RAP3Gv3_2nd_fps8.fg 15 kB
 Version: 1.20.2
 Supported Hardwares: [0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002]
Max Flash Devices: 1
Flash ID 1: 00000000 - 0000 Rev: 0000 Manufacturer: Unused MSB: 00 SectorSize: 0x010000
Signature: 55555555555555555555555555555555
Flash Loader: RAP3Gv3_algo_fps8.fg 63 kB
 Version: 1.12.5
 Supported Hardwares: [0003192101002000, 000C192101002000, 0003192101002100, 000C192101002100, 0003192101002200, 000C192101002200, 0003192101012200, 000C192101012200, 0103192101001101, 010C192101001101, 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002]
Asic ID: 000000010000022600010006010C192101001101
EM Asic ID: 00000232
EM Asic ID: 00000353
Public ID: 2680000210716056A1076EF816CE61BED6F40855
Asic Mode ID: 00
Hash: BAF3A9C3DBFA8454937DB77F2B8852B1
ROM ID: 191EC665DFAAF68F
Erase time: 38,7 sec.
Writing flash...
Flashing file:
BB5 [BB5 ALGORITHM] PPM File: rm174__05.00.ppm_w 4 080 kB
 Languages: English, Chinese Trad, Chinese Simpl, Hindi
 Speed: [3250k, 6500k, 6500k, 98k] Baud.
 Supported Hardwares: [0103192101001101, 010C192101001101]
Boot Loader: RAP3Gv3_2nd_fps8.fg 15 kB
 Version: 1.20.2
 Supported Hardwares: [0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002]
Max Flash Devices: 1
Flash ID 1: 00000000 - 0000 Rev: 0000 Manufacturer: Unused MSB: 00 SectorSize: 0x010000
Signature: 55555555555555555555555555555555
Flash Loader: RAP3Gv3_algo_fps8.fg 63 kB
 Version: 1.12.5
 Supported Hardwares: [0003192101002000, 000C192101002000, 0003192101002100, 000C192101002100, 0003192101002200, 000C192101002200, 0003192101012200, 000C192101012200, 0103192101001101, 010C192101001101, 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002]
Asic ID: 000000010000022600010006010C192101001101
EM Asic ID: 00000232
EM Asic ID: 00000353
Public ID: 2680000210716056A1076EF816CE61BED6F40855
Asic Mode ID: 00
Hash: BAF3A9C3DBFA8454937DB77F2B8852B1
ROM ID: 191EC665DFAAF68F
Erase time: 13,5 sec.
Writing flash...
Total time: 12:18,2 sec.
After Flash Delay: 15000 msec.
Initializing phone...
Output power at Line1 3.92V is in range of: 4.00V ±10.0%
TBB5FlashPhoneThread finished at: 2008/07/30 22:02:59
Terminated with error: 00010071.00015018.00011910
MCU Boot Version: 1.069, and up to date.
SMCU Boot Version: 1.34, and up to date.
Device opened at USB->Universal Box [UB***XXY]

What i do for this problem . . . .?

Check your flash IF & Reball it.

MobilesDoctor · 07-30-2008, 19:22

Quote:

Originally Posted by rajinder1978

Check your flash IF & Reball it.

You are right maybe its hardware Fault ,but first try with Software then check hardware Section

Regards
F@iSaL

amol_sm · 08-02-2008, 11:05

I try to earase flash the phone with 32Mb Earase file.
After complete earase process signature become 0000000000000.....
So it is same as before earase.
Any other solution.......?

Thankx in advance.

MobilesDoctor · 08-02-2008, 14:52

Quote:

Originally Posted by amol_sm

I try to earase flash the phone with 32Mb Earase file.
After complete earase process signature become 0000000000000.....
So it is same as before earase.
Any other solution.......?

Thankx in advance.

let me know what is condition now ,Did you Flash With Latest version ?

Regards
F@iSaL

amol_sm · 08-04-2008, 16:05

Yes i flash the phone with latest version. But phone can't show Local mode in the screen.
Also phone still dead.

MobilesDoctor · 08-04-2008, 21:31

Quote:

Originally Posted by amol_sm

Yes i flash the phone with latest version. But phone can't show Local mode in the screen.
Also phone still dead.

Thats Mean it is Hardware problem .SO check Hardware section and Better for you .Contact me on MSN

Regards
F@iSaL

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
K850 showing K700 still same after full flash	azeem781986	SETool2	9	02-08-2010 13:34
samsung d820 after full flash it show only sam d820	k babu	HWK	0	04-09-2009 07:05
C60 after full flash show recharg Battery	aukonline	DreamBox	2	04-03-2006 13:15

07-30-2008, 18:34	#2 (permalink)
MobilesDoctor No Life Poster Join Date: Oct 2004 Location: IRELAND Posts: 14,215 Member: 87357 Status: Offline Thanks Meter: 9,457	Erase your Phone with 32Mb Erase File , Full Flash with latest version ,If You have back then write it otherwise you need ask to rpl Service ,after write Rpl Make SX4 and Write Pm with out 308 Regards F@iSaL

08-02-2008, 11:05	#5 (permalink)
amol_sm No Life Poster Join Date: Sep 2006 Posts: 2,929 Member: 343326 Status: Offline Thanks Meter: 1,463	I try to earase flash the phone with 32Mb Earase file. After complete earase process signature become 0000000000000..... So it is same as before earase. Any other solution.......? Thankx in advance.

08-04-2008, 16:05	#7 (permalink)
amol_sm No Life Poster Join Date: Sep 2006 Posts: 2,929 Member: 343326 Status: Offline Thanks Meter: 1,463	Yes i flash the phone with latest version. But phone can't show Local mode in the screen. Also phone still dead.