Bugs, and things to do - Page 4 - GSM-Forum

ssauji · 10-01-2008, 09:33

sir why still 3110c model not supported to flash with ub plz make it possible with ub

**universalbox** · 10-01-2008, 12:18

Quote:

Originally Posted by ssauji

sir why still 3110c model not supported to flash with ub plz make it possible with ub

Hello,

try to flash it via usb, because fbus flashing is not so stable yet.

Rodrigo_c · 10-01-2008, 22:26

Quote:

Originally Posted by universalbox

Ok, we will check it tomorrow, is it working with usb?

Hi, I check flash usb today after update 2.5.8 (No downgrade)

Code:

--------------------------------------------------------------------------------
MCU Nokia Version: 1.124, and up to date.
SMCU Nokia Version: 1.42, and up to date.
Flashing file:
BB5 [BB5 ALGORITHM] MCU File: rm115__06.10.mcusw 13 258 kB
 Speed: [3250k, 6500k, 6500k, 98k] Baud.
 Supported Hardwares: [0103192101001101, 010C192101001101]
Please power on the phone!
USB boot device detected
Boot Loader: BB5DeadUSBGeneric.fia 14 kB

 Supported Hardwares: [0103192101001101, 010C192101001101]
USB Flash Loader: BB5Generic_UPDAPP.fia 233 kB
 Version: 1.0.0
Asic ID: 000000010000022600010006010C192101001101
EM Asic ID: 00000232
EM Asic ID: 00000353
Public ID: 0CE0000856A86D560DCE925A1FF64C85D45A43D3
Asic Mode ID: 00
Hash: BAF3A9C3DBFA8454937DB77F2B8852B1
ROM ID: 191EC665DFAAF68F
Detecting USB flash device...
USB flash device detected
UCP sector size: 128 KB
Erase time: 45,3 sec.
Writing flash...
Flashing file:
BB5 [BB5 ALGORITHM] UCP File: rm115__06.10.image_L_Entel 6 664 kB
 Speed: [3250k, 6500k, 6500k, 98k] Baud.
 Supported Hardwares: [0103192101001101, 010C192101001101]
Converting UCP block to 128k
Erase time: 41,2 sec.
Writing flash...
Flashing file:
BB5 [BB5 ALGORITHM] PPM File: rm115__06.10.ppm_l 3 727 kB
 Languages: English, Croatian, German, Slovenian, Serbian Latin
 Speed: [3250k, 6500k, 6500k, 98k] Baud.
 Supported Hardwares: [0103192101001101, 010C192101001101]
Erase time: 12,3 sec.
Writing flash...
Total time: 4:40,7 sec.
After Flash Delay: 15000 msec.
Detecting BB5 USB device...

I wait more than 15 minutes and still well ..

I disconnect and reconnect

Code:

--------------------------------------------------------------------------------
TBB5FlashPhoneThread finished at: 2008-10-01 13:36:45

Terminated with error: 0001401A.0001400A.00014010.00014018.00015036.00011910

But the phone works fine.

Regards

JC_BY · 10-06-2008, 20:37

Quote:

Originally Posted by Alcron

And check this ( 6300 v6.01 ) :

TBB5FlashPhoneThread started at: 2008.10.01 09:13:29
--------------------------------------------------------------------------------
MCU Nokia Version: 1.124, and up to date.
SMCU Nokia Version: 1.42, and up to date.
Flashing file:
BB5 [BB5 ALGORITHM] PPM File: rm217__06.01.ppm_d 4 694 kB
Languages: English, German, Slovak, Slovene, Serbian, Hungarian, Czech, Croatian
Speed: [3250k, 6500k, 6500k, 98k] Baud.
Supported Hardwares: [0103192101001101, 010C192101001101]
Input power: 4,74V OK.
Output power at Line1 3,99V is in range of: 4,00V ±10,0%
Boot Loader: RAP3Gv3_2nd_fps8.fg 15 kB
Version: 1.20.2
Supported Hardwares: [0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002]
Max Flash Devices: 1
Flash ID 1: 00010041 - 0000 Rev: 6A21 Manufacturer: AMD MSB: 00 SectorSize: 0x010000
Signature: 00000000000000000000000000000000
Asic ID: 000000010000022600010006010C192101001101
EM Asic ID: 00000232
EM Asic ID: 00000353
Public ID: 16100205F7477B56DF300F19A23DF13B9B7AEA6E
Asic Mode ID: 00
Hash: BAF3A9C3DBFA8454937DB77F2B8852B1
ROM ID: 191EC665DFAAF68F
--------------------------------------------------------------------------------
TBB5FlashPhoneThread finished at: 2008.10.01 09:13:38

Terminated with error: No available flashloader for this HW/Flash ID [000110EA].00011166.00011176.000115E8
MCU Boot Version: 1.069, and up to date.
SMCU Boot Version: 1.34, and up to date.
Device opened at USB->Universal Box [*********]

Try to check "Enable RX2" option and try again.

Mohsin Ali S · 10-08-2008, 08:03

any n95 always giving this error on ok cable checked on ufs 7 pin error is here
TBB5FlashPhoneThread started at: 2008/09/30 10:14:08
--------------------------------------------------------------------------------
MCU Nokia Version: 1.124, and up to date.
SMCU Nokia Version: 1.42, and up to date.
Flashing file:
BB5 [XSR 1.5] MCU File: RM-159_21.0.016_PR.C0R 72 381 kB
Speed: [51k, 6500k, 6500k, 98k] Baud.
Supported Hardwares: [4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103]
Supported APE Hardwares: [24200705]
Input power: 4.70V OK.
Output power at Line1 3.97V is in range of: 4.00V ±10.0%
--------------------------------------------------------------------------------
TBB5FlashPhoneThread finished at: 2008/09/30 10:14:16

Terminated with error: 000100A6.000100A8.000100B8.0001102C.000115E0
MCU Boot Version: 1.069, and up to date.
SMCU Boot Version: 1.34, and up to date.
Device opened at USB->Universal Box [UBEFLMXM]

smart-tecmobile · 10-08-2008, 09:53

There should be a whole list of mobile phones that are flash with ub and that are not flash with ub, and also that are flash with usb also

yurais · 10-09-2008, 03:44

UB guys, please read the post attached and I will appreciate if you can reply!!!

Downloaad access

blackboxer · 10-09-2008, 09:07

I am having some problem, when I flash it always prompt

Terminated with error: No availible flashloader for this HW/Flash ID[00110EA].00011176.000115E0

But when i flash with USB no problem, I have tried all BB5 phone and I face the same problem, how can I solve this problem?
thks in advance

Dany · 10-09-2008, 11:52

Dear UB team

My box & sw comes very innestable when boot the phones for flash or for unlock (example Asic 11)

Why ? Help me because I have many problems for this.
When the UB sw made minous things work perfectly, now you put bb5 and many good functions but the sw present many problems.
Why do you make 2 sw, 1 for one thing and other for other thing ? I dont know... only said because the ub sw and box its a very good tool but now present many bugs but before no !
Many thanks and regards

mtb116 · 10-09-2008, 13:20

please add more dct4+ patched firmware versions and models..

**universalbox** · 10-09-2008, 15:55

Quote:

Originally Posted by Dany

Dear UB team

My box & sw comes very innestable when boot the phones for flash or for unlock (example Asic 11)

Why ? Help me because I have many problems for this.
When the UB sw made minous things work perfectly, now you put bb5 and many good functions but the sw present many problems.
Why do you make 2 sw, 1 for one thing and other for other thing ? I dont know... only said because the ub sw and box its a very good tool but now present many bugs but before no !
Many thanks and regards

Ok, we will check it, but you have checked easy flash cable...
Are you using easy flash?

**universalbox** · 10-09-2008, 15:55

Quote:

Originally Posted by mtb116

please add more dct4+ patched firmware versions and models..

Can u post me what version u need.

Dany · 10-09-2008, 17:26

Quote:

Originally Posted by universalbox

Ok, we will check it, but you have checked easy flash cable...
Are you using easy flash?

Hi
The problem is with easy cable and with fbus cable also.
When I flash and unlock procedure (with a Asic11) more frecuently.
regards

wgmmmx · 10-09-2008, 21:51

Quote:

Originally Posted by Dany

Hi
The problem is with easy cable and with fbus cable also.
When I flash and unlock procedure (with a Asic11) more frecuently.
regards

Then you got something with usb cable or USB port in computer becouse today I flash 30 pcs 2600c with easy flash and 20 2630 with easy flash and few 2600c with normal cable and all without problems.

trashed · 10-15-2008, 19:41

hi,

please update the nokia models list...

i know there are no problems in nokia models in UB's directory but for phoenix, its pretty messed up...

most of your users uses flashfiles from phoenix, not from the directory of UB itself...

or you can just place it in separate ini file like "models.ini" so ordinary users can just add new models that is not recognized by UB's software...

please support product code ini's on latest data package...

and lastly, can you make DCT4+ unlock offline? hope you can consider that...

10-01-2008, 09:33	#46 (permalink)
ssauji Freak Poster Join Date: Oct 2006 Posts: 122 Member: 368650 Status: Offline Thanks: 46 Thanked 15 Times in 13 Posts	3110c un suported model sir why still 3110c model not supported to flash with ub plz make it possible with ub

10-08-2008, 08:03	#50 (permalink)
Mohsin Ali S Member deceased !! Join Date: Nov 2006 Location: Pakistan Posts: 269 Member: 390175 Status: Offline Thanks: 5 Thanked 19 Times in 16 Posts	Plz Help me any n95 always giving this error on ok cable checked on ufs 7 pin error is here TBB5FlashPhoneThread started at: 2008/09/30 10:14:08 -------------------------------------------------------------------------------- MCU Nokia Version: 1.124, and up to date. SMCU Nokia Version: 1.42, and up to date. Flashing file: BB5 [XSR 1.5] MCU File: RM-159_21.0.016_PR.C0R 72 381 kB Speed: [51k, 6500k, 6500k, 98k] Baud. Supported Hardwares: [4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103] Supported APE Hardwares: [24200705] Input power: 4.70V OK. Output power at Line1 3.97V is in range of: 4.00V ±10.0% -------------------------------------------------------------------------------- TBB5FlashPhoneThread finished at: 2008/09/30 10:14:16 Terminated with error: 000100A6.000100A8.000100B8.0001102C.000115E0 MCU Boot Version: 1.069, and up to date. SMCU Boot Version: 1.34, and up to date. Device opened at USB->Universal Box [UBEFLMXM]

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
Bugs in the last software version and things to do	Reibak	Cyclonebox	67	01-05-2010 16:04
bugs and things to do pls post here any problem on 1.28	shoktong	MSS Box II	1	12-08-2009 00:26
How to Be Your Little Man's Dad: 365 Things to Do with Your Son	IPMART	ipmart WebShop	0	10-13-2009 14:00
What is the Next thing to do?	cellcom_salazar	Easy-Unlocker	3	09-13-2008 06:52
It is posible to change imei with griffin,and how to do it?	VREDNYJ	Griffin	6	09-27-2004 16:08

10-08-2008, 09:53	#51 (permalink)
smart-tecmobile Major Poster Join Date: Dec 2007 Posts: 48 Member: 644163 Status: Offline Thanks: 36 Thanked 0 Times in 0 Posts	There should be a whole list of mobile phones that are flash with ub and that are not flash with ub, and also that are flash with usb also

10-09-2008, 03:44	#52 (permalink)
yurais No Life Poster Join Date: Jan 2006 Location: Santiago de Cuba Posts: 1,351 Member: 220595 Status: Offline Thanks: 38 Thanked 73 Times in 45 Posts	UB guys, please read the post attached and I will appreciate if you can reply!!! Downloaad access

10-09-2008, 09:07	#53 (permalink)
blackboxer Junior Member Join Date: Dec 2006 Posts: 27 Member: 415591 Status: Offline Thanks: 1 Thanked 3 Times in 3 Posts	I am having some problem, when I flash it always prompt Terminated with error: No availible flashloader for this HW/Flash ID[00110EA].00011176.000115E0 But when i flash with USB no problem, I have tried all BB5 phone and I face the same problem, how can I solve this problem? thks in advance

10-09-2008, 13:20	#55 (permalink)
mtb116 No Life Poster Join Date: Sep 2005 Location: Aus Posts: 587 Member: 177568 Status: Offline Thanks: 5 Thanked 26 Times in 21 Posts	please add more dct4+ patched firmware versions and models..

10-15-2008, 19:41	#60 (permalink)
trashed Product Supporter Join Date: Jan 2002 Location: Philippines Posts: 479 Member: 8303 Status: Offline Thanks: 4 Thanked 96 Times in 49 Posts	hi, please update the nokia models list... i know there are no problems in nokia models in UB's directory but for phoenix, its pretty messed up... most of your users uses flashfiles from phoenix, not from the directory of UB itself... or you can just place it in separate ini file like "models.ini" so ordinary users can just add new models that is not recognized by UB's software... please support product code ini's on latest data package... and lastly, can you make DCT4+ unlock offline? hope you can consider that...